• mit DCC Motordekoder
• mit Sound

New roadname Era: late 1960s to early 1980s Series 6900 to 6976; built 10:62-1:63 Road numbers 6911, 6963 and 6974 Spread out ‘B&O’ logo Plexiglass numberboards Road numbers 6922 and 6939 Closely spaced ‘B&O’ lettering Original glass style numberboards Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* Operating LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** Cab and rear number boards Front and rear multiple unit (MU) hose catch boxes 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with equal length on both sides and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand No cab vents Sliding cab side windows Tall clear wind wings with mirror at top mounted fore and aft of cab side window on both sides of cab Short sunshade with long sunshade tracks Lost-wax brass cast Leslie SU-3L-R horn mounted on right side cab eave Radio “whip” antenna on number board housing Accurate hood door and long hood detail Late single-panel inertial compartment Wire inertial air intake grills Short turbo exhaust stack Standard-range dynamic brakes with 48” fan Late See-through dynamic brake intake grills with horizontal wires through vertical vanes 6-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Curved radiator fan grab iron Square door-style sand fill door on right side hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bronze bell No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22”

• mit DCC Motordekoder
• mit Sound

New roadname Era: late 1960s to early 1980s Series 6900 to 6976; built 10:62-1:63 Road numbers 6911, 6963 and 6974 Spread out ‘B&O’ logo Plexiglass numberboards Road numbers 6922 and 6939 Closely spaced ‘B&O’ lettering Original glass style numberboards Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* Operating LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** Cab and rear number boards Front and rear multiple unit (MU) hose catch boxes 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with equal length on both sides and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand No cab vents Sliding cab side windows Tall clear wind wings with mirror at top mounted fore and aft of cab side window on both sides of cab Short sunshade with long sunshade tracks Lost-wax brass cast Leslie SU-3L-R horn mounted on right side cab eave Radio “whip” antenna on number board housing Accurate hood door and long hood detail Late single-panel inertial compartment Wire inertial air intake grills Short turbo exhaust stack Standard-range dynamic brakes with 48” fan Late See-through dynamic brake intake grills with horizontal wires through vertical vanes 6-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Curved radiator fan grab iron Square door-style sand fill door on right side hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bronze bell No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22”

• mit DCC Motordekoder
• mit Sound

New roadname Era: late 1960s to early 1980s Series 6900 to 6976; built 10:62-1:63 Road numbers 6911, 6963 and 6974 Spread out ‘B&O’ logo Plexiglass numberboards Road numbers 6922 and 6939 Closely spaced ‘B&O’ lettering Original glass style numberboards Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* Operating LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** Cab and rear number boards Front and rear multiple unit (MU) hose catch boxes 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with equal length on both sides and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand No cab vents Sliding cab side windows Tall clear wind wings with mirror at top mounted fore and aft of cab side window on both sides of cab Short sunshade with long sunshade tracks Lost-wax brass cast Leslie SU-3L-R horn mounted on right side cab eave Radio “whip” antenna on number board housing Accurate hood door and long hood detail Late single-panel inertial compartment Wire inertial air intake grills Short turbo exhaust stack Standard-range dynamic brakes with 48” fan Late See-through dynamic brake intake grills with horizontal wires through vertical vanes 6-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Curved radiator fan grab iron Square door-style sand fill door on right side hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bronze bell No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22”

• mit DCC Motordekoder
• mit Sound

New roadname Era: late 1960s to early 1980s Series 6900 to 6976; built 10:62-1:63 Road numbers 6911, 6963 and 6974 Spread out ‘B&O’ logo Plexiglass numberboards Road numbers 6922 and 6939 Closely spaced ‘B&O’ lettering Original glass style numberboards Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* Operating LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** Cab and rear number boards Front and rear multiple unit (MU) hose catch boxes 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with equal length on both sides and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand No cab vents Sliding cab side windows Tall clear wind wings with mirror at top mounted fore and aft of cab side window on both sides of cab Short sunshade with long sunshade tracks Lost-wax brass cast Leslie SU-3L-R horn mounted on right side cab eave Radio “whip” antenna on number board housing Accurate hood door and long hood detail Late single-panel inertial compartment Wire inertial air intake grills Short turbo exhaust stack Standard-range dynamic brakes with 48” fan Late See-through dynamic brake intake grills with horizontal wires through vertical vanes 6-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Curved radiator fan grab iron Square door-style sand fill door on right side hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bronze bell No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22”

• mit DCC Motordekoder
• mit Sound

New roadname Era: 1963 to early 1970s Series 1246 to 1284; built 1-6:1963 Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* Operating LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** Cab and rear number boards Front and rear multiple unit (MU) hose catch boxes and footboards 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with increased length on left (fireman’s) side and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Cab side vent on left side Sliding cab side windows Small mirrors mounted fore of cab side windows on both sides of cab No sunshades or sunshade tracks Lost-wax brass cast Leslie Supertyfon S-2M over the cab engineers side and single chime S-25 over the cab conductors side Bendix-King 'can' style antenna mounted on cab roof Accurate hood door and long hood detail Late single-panel inertial compartment Wire inertial air intake grills Tall turbo exhaust stack Standard-range dynamic brakes with 48” fan Early See-through dynamic brake intake grills with horizontal wires through vertical vanes 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Curved radiator fan grab iron Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with square and sloped bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bronze bell No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22”

• mit DCC Motordekoder
• mit Sound

New roadname Era: 1963 to early 1970s Series 1246 to 1284; built 1-6:1963 Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* Operating LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** Cab and rear number boards Front and rear multiple unit (MU) hose catch boxes and footboards 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with increased length on left (fireman’s) side and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Cab side vent on left side Sliding cab side windows Small mirrors mounted fore of cab side windows on both sides of cab No sunshades or sunshade tracks Lost-wax brass cast Leslie Supertyfon S-2M over the cab engineers side and single chime S-25 over the cab conductors side Bendix-King 'can' style antenna mounted on cab roof Accurate hood door and long hood detail Late single-panel inertial compartment Wire inertial air intake grills Tall turbo exhaust stack Standard-range dynamic brakes with 48” fan Early See-through dynamic brake intake grills with horizontal wires through vertical vanes 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Curved radiator fan grab iron Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with square and sloped bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bronze bell No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22”

• mit DCC Motordekoder
• mit Sound

New roadname Era: 1963 to early 1970s Series 1246 to 1284; built 1-6:1963 Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* Operating LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** Cab and rear number boards Front and rear multiple unit (MU) hose catch boxes and footboards 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with increased length on left (fireman’s) side and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Cab side vent on left side Sliding cab side windows Small mirrors mounted fore of cab side windows on both sides of cab No sunshades or sunshade tracks Lost-wax brass cast Leslie Supertyfon S-2M over the cab engineers side and single chime S-25 over the cab conductors side Bendix-King 'can' style antenna mounted on cab roof Accurate hood door and long hood detail Late single-panel inertial compartment Wire inertial air intake grills Tall turbo exhaust stack Standard-range dynamic brakes with 48” fan Early See-through dynamic brake intake grills with horizontal wires through vertical vanes 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Curved radiator fan grab iron Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with square and sloped bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bronze bell No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22”

• mit DCC Motordekoder
• mit Sound

New roadname Era: 1963 to early 1970s Series 1246 to 1284; built 1-6:1963 Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* Operating LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** Cab and rear number boards Front and rear multiple unit (MU) hose catch boxes and footboards 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with increased length on left (fireman’s) side and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Cab side vent on left side Sliding cab side windows Small mirrors mounted fore of cab side windows on both sides of cab No sunshades or sunshade tracks Lost-wax brass cast Leslie Supertyfon S-2M over the cab engineers side and single chime S-25 over the cab conductors side Bendix-King 'can' style antenna mounted on cab roof Accurate hood door and long hood detail Late single-panel inertial compartment Wire inertial air intake grills Tall turbo exhaust stack Standard-range dynamic brakes with 48” fan Early See-through dynamic brake intake grills with horizontal wires through vertical vanes 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Curved radiator fan grab iron Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with square and sloped bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bronze bell No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22”

• DCC vorbereitet (Schnittstelle vorhanden)

New road numbers Era: 1997 through late 2011 ‘as delivered’ red sill stripes Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated front deck-mounted ditch lights** Operating LED-illuminated front, rear, and side walkway lights* Printed high-mount cab number boards with separately controlled backlit LED-illumination* Tall snowplow with open doors and two (2) grab irons Semi-scale coupler buffer equipped with durable metal semi-scale Type E lower-shelf knuckle couplers 5-step stepwells with see-through steps Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Front nose headlight Nose door without window Two-piece nose top grab irons Battery cabinet access door without latch GE safety cab with three (3) side windows Right side cab under floor access doors: dual large louver panels per door Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s desktop controls In-cab grade crossing camera Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Octagonal antenna dome; small square antenna dome Intermediate: four (4) square bolted panels and three (3) tall horizontal X-panels Continuous reinforcement rib under dynamic brake intake grilles Standard dynamic brake exhaust (2-port) Rearward right-side air intake grille Left side auxiliary cab: three (3) short doors with latches on the #2 door; auxiliary cab filter box door Capacitor box on left side walkway Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Late angled engine cab profile with tri-fold power assembly access doors Lost-wax brass cast Nathan AirChime K3LAR2 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, tall grilles Low-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Late Hi-Ad trucks with cantilever struts on right front and left rear sideframes Rotating axle bearing caps No speed recorder Dual Graham-White (Prime) 975-075 air filters Graham-White 994-500 series air dryer 5,000-gallon fuel tank with vertical weld seams Single fuel fills per side Vertical analog fuel gauges; “blanked” round gauges; and digital fuel gauges Fuel tank mounted steel bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Early square handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22”

• mit DCC Motordekoder
• mit Sound

Series 4550 to 4574; ex FSRR 4550 to 4574, built 11-12/2004 Road number 4572 Era: 2021 to present New Ferromex ‘Zebra’ scheme Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated front pilot face mounted ditch lights** Operating LED-illuminated front, rear, and side walkway lights* Printed low-mount cab number boards with separately controlled backlit LED-illumination* Tall snowplow with open doors and two (2) grab irons Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers 5-step stepwells with see-through steps Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Front nose headlight Nose door with window Two-piece nose top grab irons Battery cabinet access door without latch GE safety cab with three (3) side windows Right side cab under floor access doors: dual large louver panels per door Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s desktop controls In-cab grade crossing camera Tinted cab side windows Medium mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Octagonal antenna dome Late: two (2) tall, welded X-panels and three (3) large, bolted X-panels underneath Continuous reinforcement rib under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Rearward right-side air intake grille Left side auxiliary cab: three (3) short doors with latches on the #2 door; auxiliary cab filter box door Capacitor box on left side walkway Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Late angled engine cab profile with tri-fold power assembly access doors Lost-wax brass cast Nathan AirChime K3LAR2 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, tall grilles Low-mounted rear sand fill Late angled lifting “tabs” on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Early GE Steerable Trucks Rotating axle bearing caps No speed recorder Dual Graham-White (Salem) 824-100 centrifugal air filters No air dryer 5,000-gallon fuel tank with angled weld seam; clean out on left side Single fuel fills per side Vertical analog fuel gauges; “blanked” round gauges; and digital fuel gauges Fuel tank mounted steel bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Early square handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22”

Road Number Specific ScaleTrains Fully assembled "Joe Jordan" Two (2) roof equipment boxes Water plumbing details. Unique weld seam locations Riveted end access plates Commonwealth 3-axle trucks with rotating bearing caps 24,000-gallon capacity Non-insulated Intricate electrical and water plumbing Handbrake housing with finely detailed wheel and chain Factory-applied air tank, brake cylinder, and control valve Brake beam Underbody brake details and plumbing Factory-applied multiple unit (MU) hoses, coupler cut levers, and trainline hoses Durable body-mounted metal semi-scale Type E knuckle couplers 36” machined metal wheels Accurately profiled .110" wide wheel tread Directional front and rear LED lighting 2-function DCC programmable decoder Operate using DC and DCC Operates on Code 70, 83 and 100 rail Printing and lettering legible even under magnification Weighted above Industry standards Packaging safely stores model Truck safety chains available separately (SXT80111) – requires 22” minimum radius curve Minimum radius: 18”

• mit DCC Motordekoder
• mit Sound

Road number 9617 (ex-SP 8153) Era: 2000-2008 Patched former Southern Pacific unit Unique destressed paint and lettering Last patched SP C44-9W before repainting Yellow sill stripes Fully-assembled Multiple road numbers Operating LED-illuminated front deck-mounted ditch lights* Printed and LED-illuminated number boards* Factory-applied detail parts: wire grab irons, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, MU cable, uncoupling levers, windshield wipers, mirrors, sunshades, brake wheel, and more Tall snowplow with open doors and grab irons Semi-scale Type E knuckle couplers – Micro-Trains® compatible Body mounted coupler box – accepts Micro-Trains® 1015/1016 type couplers without modification 5-step stepwells Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Nose door without window Front LED-illuminated headlight with lenses on low short hood GE safety cab with three (3) side windows Detailed cab interior with floor, rear wall, seats, and desktop Tinted cab side windows Large Sinclair “ice skate” communications antenna, small Sinclair “ice skate” End of Train (EOT) telemetry antenna, “wedge” antenna, and GPS dome Motive Equipment Inc. (MEI) ME7000 HVAC Unit Early (curved) engine cab profile Early flanged exhaust stack housing “Bathtub” exhaust silencer Early radiator door grille pattern (all the same height) Low-mounted rear sandfiller Early lifting lugs on ends of radiator wings Rear LED-illuminated vertical headlight with lenses Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with separately applied brake cylinders and air plumbing Separate air tanks with upper mounting brackets Fuel tank mounted steel bell 5,000 gallon fuel tank Dual fuel fills per side with rear fill “blanked” Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum Radius: 9 ¾” Recommended Radius: 11” DCC & sound equipped locomotives also feature ESU-LokSound 5 Micro DCC & sound decoder with “Full Throttle” Cube-type speaker Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

Vorbestellfrist für garantierte Lieferung: 26.02.2024

• mit DCC Motordekoder
• mit Sound

Road Number-Specific ScaleTrains All-new model Era: 1980s – 1990s Series C&NW 5500-5537; ex-NYC 3010-3049, built Nov/Dec 1965 C&NW 5500 Lost-wax cast brass Leslie S-3-LR horn mounted on number board housing Standard “whip” communications antenna base mounted to cab roof Front EMD low plow with MU hose doors Replacement bearing pedestal liners White corner step edges and kickplates “OY” Scheme, “C&NW System” logo C&NW 5504 Lost-wax cast brass Leslie SU-3L-LR horn mounted on number board housing Excalibur low-profile “ice skate” communications antenna mounted to cab roof Front EMD medium plow without MU hose doors Green air reservoirs White corner step edges and yellow kickplates “OY” Scheme, “C&NW System” logo C&NW 5520 Lost-wax cast brass Leslie SU-3L-LR horn mounted on number board housing Excalibur low-profile “ice skate” communications antenna mounted to cab roof Front EMD medium plow without MU hose doors Yellow-painted nose bell White corner step edges and kickplates “OY” Scheme, “C&NW System” logo Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors, and round walkway light aft of raised walkway duct* LED-illuminated tri-color, flush-mounted front and rear class lights with raised gaskets LED-illuminated Tomar 804-1274 Strobe* Printed number boards with separately-controlled, backlit LED-illumination* 3-hose multiple unit (MU) hose groups with mounting bracket and gladhand detail Semi-scale coupler buffers equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers with straight rod extensions Notched-corner pilot face with square access plate, front and rear “Early” angled deck-mounted multiple unit (MU) receptacles, dual per end, front and rear “Short” stepwells with nub-bottom pilots, front and rear End handrails with deck and pilot face-mounted stanchions, front and rear Front and rear early small deck extension Positionable tapered (early) drop steps, front and rear Early treadplate 81” low short hood with ratchet handbrake Early straight grabs and “flipped” nut-bolt-washer (NBW) mounting on nose front and top Latched battery box doors with narrow louvers and tab-style (early) hinges Early cab sub-base doors without reinforcement ribs, both sides Single right rear cab step Cab Sub-Base Step Guards Early cab step guards (long taper) No hopper water piping underneath front battery box step Standard EMD high headlight with glare visors in numberboard housing “35-Line” cab with standard front windshields, and standard armrests, both sides Detailed cab interior with separate floor, cab blowers, rear wall, late seats with armrests, and standard AAR control stand Positionable cab side windows “Salem” combination mirror & windshield wing mounted ahead of the cab side windows, both sides Standard EMD sunshades with long mounting tracks Long hood with standard electrical cabinet seam, bolted generator compartment door, and early inertial drain hole placement (wide spacing on engineer’s side, low on fireman’s side) Small ECAFB Early (smooth) blower duct housing Early long handrail stanchion spacing with “short” stanchions at thin section of sidesill Early inertial air intake grilles without drip rails Standard turbo exhaust stack Early extended-range dynamic brake housing (short tapers), with retrofitted long contactor door See-through 48” standard-height dynamic brake fan housing with 10-blade fan and hub assembly, with spiral-grill and center cap Dynamic brake intakes with see-through intake vanes, and resistor grid detail inside of the housing Diamond-mesh radiator intake screening See-through standard-height 48” radiator fan housings with 8-blade fan and hub assembly Separately-applied radiator core detail mounted inside of long hood, visible under radiator fans Curved radiator fan grab iron Rear LED-illuminated horizontal headlight and standard housing Early rear sander door catch placement (inboard) Underbody frame rails with separately-applied plumbing and traction motor cable bundle details Detailed Blomberg-B truck frames (LFM-cast) with Hyatt bearing housings, separately-applied brake cylinders in released (piston retracted) position, elliptical springs, end transom detail, separate sanding lines and brackets, deleted outer brake shoes, and separate swing hanger detail Separately-applied flexible neoprene sanding lines at stepwell ends of trucks Rust-color painted wheelsets “Aeroquip” brand speed recorder with adapter flange mounted to right #2 axle ATC Pickup shoe on #1 axle, right side Standard 4 jacking pads Frame-mounted bell Salem-brand #824-170 and #818-170 primary and secondary centrifugal air filters, respectively (accordion-style) Separately-applied brake vent regulator valve and plumbing detail on underbody 3600-gallon fuel tank with early mounting brackets, inset dial gauge on right side, and early rear drain bar Separately-applied fuel fillers, drains, and breather piping on fuel tanks Separately-applied engine oil sump drain fitting with hose Separately-applied radiator water drain fitting on underbody Separately-applied truck air line plumbing on underbody above each truck, both sides Separately-applied wireform grab irons, wireform lift rings, etched windshield wipers, trainline hoses, sand hatch covers, and more Motor with 5-pole skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Paint colors match Tru-Color Paint color: TCP-109 C&NW Green TCP-353 C&NW Early Yellow Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended Radius: 22” DCC & sound-equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged EMD 16-645 prime mover sounds ESU designed “PowerPack” with two super capacitors**** Operates on both DC and DCC layouts

Vorbestellfrist für garantierte Lieferung: 26.02.2024

• mit DCC Motordekoder
• mit Sound

Road Number-Specific ScaleTrains All-new model Era: 1980s – 1990s Series C&NW 5500-5537; ex-NYC 3010-3049, built Nov/Dec 1965 C&NW 5500 Lost-wax cast brass Leslie S-3-LR horn mounted on number board housing Standard “whip” communications antenna base mounted to cab roof Front EMD low plow with MU hose doors Replacement bearing pedestal liners White corner step edges and kickplates “OY” Scheme, “C&NW System” logo C&NW 5504 Lost-wax cast brass Leslie SU-3L-LR horn mounted on number board housing Excalibur low-profile “ice skate” communications antenna mounted to cab roof Front EMD medium plow without MU hose doors Green air reservoirs White corner step edges and yellow kickplates “OY” Scheme, “C&NW System” logo C&NW 5520 Lost-wax cast brass Leslie SU-3L-LR horn mounted on number board housing Excalibur low-profile “ice skate” communications antenna mounted to cab roof Front EMD medium plow without MU hose doors Yellow-painted nose bell White corner step edges and kickplates “OY” Scheme, “C&NW System” logo Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors, and round walkway light aft of raised walkway duct* LED-illuminated tri-color, flush-mounted front and rear class lights with raised gaskets LED-illuminated Tomar 804-1274 Strobe* Printed number boards with separately-controlled, backlit LED-illumination* 3-hose multiple unit (MU) hose groups with mounting bracket and gladhand detail Semi-scale coupler buffers equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers with straight rod extensions Notched-corner pilot face with square access plate, front and rear “Early” angled deck-mounted multiple unit (MU) receptacles, dual per end, front and rear “Short” stepwells with nub-bottom pilots, front and rear End handrails with deck and pilot face-mounted stanchions, front and rear Front and rear early small deck extension Positionable tapered (early) drop steps, front and rear Early treadplate 81” low short hood with ratchet handbrake Early straight grabs and “flipped” nut-bolt-washer (NBW) mounting on nose front and top Latched battery box doors with narrow louvers and tab-style (early) hinges Early cab sub-base doors without reinforcement ribs, both sides Single right rear cab step Cab Sub-Base Step Guards Early cab step guards (long taper) No hopper water piping underneath front battery box step Standard EMD high headlight with glare visors in numberboard housing “35-Line” cab with standard front windshields, and standard armrests, both sides Detailed cab interior with separate floor, cab blowers, rear wall, late seats with armrests, and standard AAR control stand Positionable cab side windows “Salem” combination mirror & windshield wing mounted ahead of the cab side windows, both sides Standard EMD sunshades with long mounting tracks Long hood with standard electrical cabinet seam, bolted generator compartment door, and early inertial drain hole placement (wide spacing on engineer’s side, low on fireman’s side) Small ECAFB Early (smooth) blower duct housing Early long handrail stanchion spacing with “short” stanchions at thin section of sidesill Early inertial air intake grilles without drip rails Standard turbo exhaust stack Early extended-range dynamic brake housing (short tapers), with retrofitted long contactor door See-through 48” standard-height dynamic brake fan housing with 10-blade fan and hub assembly, with spiral-grill and center cap Dynamic brake intakes with see-through intake vanes, and resistor grid detail inside of the housing Diamond-mesh radiator intake screening See-through standard-height 48” radiator fan housings with 8-blade fan and hub assembly Separately-applied radiator core detail mounted inside of long hood, visible under radiator fans Curved radiator fan grab iron Rear LED-illuminated horizontal headlight and standard housing Early rear sander door catch placement (inboard) Underbody frame rails with separately-applied plumbing and traction motor cable bundle details Detailed Blomberg-B truck frames (LFM-cast) with Hyatt bearing housings, separately-applied brake cylinders in released (piston retracted) position, elliptical springs, end transom detail, separate sanding lines and brackets, deleted outer brake shoes, and separate swing hanger detail Separately-applied flexible neoprene sanding lines at stepwell ends of trucks Rust-color painted wheelsets “Aeroquip” brand speed recorder with adapter flange mounted to right #2 axle ATC Pickup shoe on #1 axle, right side Standard 4 jacking pads Frame-mounted bell Salem-brand #824-170 and #818-170 primary and secondary centrifugal air filters, respectively (accordion-style) Separately-applied brake vent regulator valve and plumbing detail on underbody 3600-gallon fuel tank with early mounting brackets, inset dial gauge on right side, and early rear drain bar Separately-applied fuel fillers, drains, and breather piping on fuel tanks Separately-applied engine oil sump drain fitting with hose Separately-applied radiator water drain fitting on underbody Separately-applied truck air line plumbing on underbody above each truck, both sides Separately-applied wireform grab irons, wireform lift rings, etched windshield wipers, trainline hoses, sand hatch covers, and more Motor with 5-pole skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Paint colors match Tru-Color Paint color: TCP-109 C&NW Green TCP-353 C&NW Early Yellow Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended Radius: 22” DCC & sound-equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged EMD 16-645 prime mover sounds ESU designed “PowerPack” with two super capacitors**** Operates on both DC and DCC layouts

Vorbestellfrist für garantierte Lieferung: 26.02.2024

• mit DCC Motordekoder
• mit Sound

Road Number-Specific ScaleTrains All-new model Era: 1980s – 1990s Series C&NW 5500-5537; ex-NYC 3010-3049, built Nov/Dec 1965 C&NW 5500 Lost-wax cast brass Leslie S-3-LR horn mounted on number board housing Standard “whip” communications antenna base mounted to cab roof Front EMD low plow with MU hose doors Replacement bearing pedestal liners White corner step edges and kickplates “OY” Scheme, “C&NW System” logo C&NW 5504 Lost-wax cast brass Leslie SU-3L-LR horn mounted on number board housing Excalibur low-profile “ice skate” communications antenna mounted to cab roof Front EMD medium plow without MU hose doors Green air reservoirs White corner step edges and yellow kickplates “OY” Scheme, “C&NW System” logo C&NW 5520 Lost-wax cast brass Leslie SU-3L-LR horn mounted on number board housing Excalibur low-profile “ice skate” communications antenna mounted to cab roof Front EMD medium plow without MU hose doors Yellow-painted nose bell White corner step edges and kickplates “OY” Scheme, “C&NW System” logo Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors, and round walkway light aft of raised walkway duct* LED-illuminated tri-color, flush-mounted front and rear class lights with raised gaskets LED-illuminated Tomar 804-1274 Strobe* Printed number boards with separately-controlled, backlit LED-illumination* 3-hose multiple unit (MU) hose groups with mounting bracket and gladhand detail Semi-scale coupler buffers equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers with straight rod extensions Notched-corner pilot face with square access plate, front and rear “Early” angled deck-mounted multiple unit (MU) receptacles, dual per end, front and rear “Short” stepwells with nub-bottom pilots, front and rear End handrails with deck and pilot face-mounted stanchions, front and rear Front and rear early small deck extension Positionable tapered (early) drop steps, front and rear Early treadplate 81” low short hood with ratchet handbrake Early straight grabs and “flipped” nut-bolt-washer (NBW) mounting on nose front and top Latched battery box doors with narrow louvers and tab-style (early) hinges Early cab sub-base doors without reinforcement ribs, both sides Single right rear cab step Cab Sub-Base Step Guards Early cab step guards (long taper) No hopper water piping underneath front battery box step Standard EMD high headlight with glare visors in numberboard housing “35-Line” cab with standard front windshields, and standard armrests, both sides Detailed cab interior with separate floor, cab blowers, rear wall, late seats with armrests, and standard AAR control stand Positionable cab side windows “Salem” combination mirror & windshield wing mounted ahead of the cab side windows, both sides Standard EMD sunshades with long mounting tracks Long hood with standard electrical cabinet seam, bolted generator compartment door, and early inertial drain hole placement (wide spacing on engineer’s side, low on fireman’s side) Small ECAFB Early (smooth) blower duct housing Early long handrail stanchion spacing with “short” stanchions at thin section of sidesill Early inertial air intake grilles without drip rails Standard turbo exhaust stack Early extended-range dynamic brake housing (short tapers), with retrofitted long contactor door See-through 48” standard-height dynamic brake fan housing with 10-blade fan and hub assembly, with spiral-grill and center cap Dynamic brake intakes with see-through intake vanes, and resistor grid detail inside of the housing Diamond-mesh radiator intake screening See-through standard-height 48” radiator fan housings with 8-blade fan and hub assembly Separately-applied radiator core detail mounted inside of long hood, visible under radiator fans Curved radiator fan grab iron Rear LED-illuminated horizontal headlight and standard housing Early rear sander door catch placement (inboard) Underbody frame rails with separately-applied plumbing and traction motor cable bundle details Detailed Blomberg-B truck frames (LFM-cast) with Hyatt bearing housings, separately-applied brake cylinders in released (piston retracted) position, elliptical springs, end transom detail, separate sanding lines and brackets, deleted outer brake shoes, and separate swing hanger detail Separately-applied flexible neoprene sanding lines at stepwell ends of trucks Rust-color painted wheelsets “Aeroquip” brand speed recorder with adapter flange mounted to right #2 axle ATC Pickup shoe on #1 axle, right side Standard 4 jacking pads Frame-mounted bell Salem-brand #824-170 and #818-170 primary and secondary centrifugal air filters, respectively (accordion-style) Separately-applied brake vent regulator valve and plumbing detail on underbody 3600-gallon fuel tank with early mounting brackets, inset dial gauge on right side, and early rear drain bar Separately-applied fuel fillers, drains, and breather piping on fuel tanks Separately-applied engine oil sump drain fitting with hose Separately-applied radiator water drain fitting on underbody Separately-applied truck air line plumbing on underbody above each truck, both sides Separately-applied wireform grab irons, wireform lift rings, etched windshield wipers, trainline hoses, sand hatch covers, and more Motor with 5-pole skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Paint colors match Tru-Color Paint color: TCP-109 C&NW Green TCP-353 C&NW Early Yellow Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended Radius: 22” DCC & sound-equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged EMD 16-645 prime mover sounds ESU designed “PowerPack” with two super capacitors**** Operates on both DC and DCC layouts

Vorbestellfrist für garantierte Lieferung: 26.02.2024

• DCC vorbereitet (Schnittstelle vorhanden)

Road Number-Specific ScaleTrains All-new model Era: 1980s – 1990s Series C&NW 5500-5537; ex-NYC 3010-3049, built Nov/Dec 1965 C&NW 5500 Lost-wax cast brass Leslie S-3-LR horn mounted on number board housing Standard “whip” communications antenna base mounted to cab roof Front EMD low plow with MU hose doors Replacement bearing pedestal liners White corner step edges and kickplates “OY” Scheme, “C&NW System” logo C&NW 5504 Lost-wax cast brass Leslie SU-3L-LR horn mounted on number board housing Excalibur low-profile “ice skate” communications antenna mounted to cab roof Front EMD medium plow without MU hose doors Green air reservoirs White corner step edges and yellow kickplates “OY” Scheme, “C&NW System” logo C&NW 5520 Lost-wax cast brass Leslie SU-3L-LR horn mounted on number board housing Excalibur low-profile “ice skate” communications antenna mounted to cab roof Front EMD medium plow without MU hose doors Yellow-painted nose bell White corner step edges and kickplates “OY” Scheme, “C&NW System” logo Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors, and round walkway light aft of raised walkway duct* LED-illuminated tri-color, flush-mounted front and rear class lights with raised gaskets LED-illuminated Tomar 804-1274 Strobe* Printed number boards with separately-controlled, backlit LED-illumination* 3-hose multiple unit (MU) hose groups with mounting bracket and gladhand detail Semi-scale coupler buffers equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers with straight rod extensions Notched-corner pilot face with square access plate, front and rear “Early” angled deck-mounted multiple unit (MU) receptacles, dual per end, front and rear “Short” stepwells with nub-bottom pilots, front and rear End handrails with deck and pilot face-mounted stanchions, front and rear Front and rear early small deck extension Positionable tapered (early) drop steps, front and rear Early treadplate 81” low short hood with ratchet handbrake Early straight grabs and “flipped” nut-bolt-washer (NBW) mounting on nose front and top Latched battery box doors with narrow louvers and tab-style (early) hinges Early cab sub-base doors without reinforcement ribs, both sides Single right rear cab step Cab Sub-Base Step Guards Early cab step guards (long taper) No hopper water piping underneath front battery box step Standard EMD high headlight with glare visors in numberboard housing “35-Line” cab with standard front windshields, and standard armrests, both sides Detailed cab interior with separate floor, cab blowers, rear wall, late seats with armrests, and standard AAR control stand Positionable cab side windows “Salem” combination mirror & windshield wing mounted ahead of the cab side windows, both sides Standard EMD sunshades with long mounting tracks Long hood with standard electrical cabinet seam, bolted generator compartment door, and early inertial drain hole placement (wide spacing on engineer’s side, low on fireman’s side) Small ECAFB Early (smooth) blower duct housing Early long handrail stanchion spacing with “short” stanchions at thin section of sidesill Early inertial air intake grilles without drip rails Standard turbo exhaust stack Early extended-range dynamic brake housing (short tapers), with retrofitted long contactor door See-through 48” standard-height dynamic brake fan housing with 10-blade fan and hub assembly, with spiral-grill and center cap Dynamic brake intakes with see-through intake vanes, and resistor grid detail inside of the housing Diamond-mesh radiator intake screening See-through standard-height 48” radiator fan housings with 8-blade fan and hub assembly Separately-applied radiator core detail mounted inside of long hood, visible under radiator fans Curved radiator fan grab iron Rear LED-illuminated horizontal headlight and standard housing Early rear sander door catch placement (inboard) Underbody frame rails with separately-applied plumbing and traction motor cable bundle details Detailed Blomberg-B truck frames (LFM-cast) with Hyatt bearing housings, separately-applied brake cylinders in released (piston retracted) position, elliptical springs, end transom detail, separate sanding lines and brackets, deleted outer brake shoes, and separate swing hanger detail Separately-applied flexible neoprene sanding lines at stepwell ends of trucks Rust-color painted wheelsets “Aeroquip” brand speed recorder with adapter flange mounted to right #2 axle ATC Pickup shoe on #1 axle, right side Standard 4 jacking pads Frame-mounted bell Salem-brand #824-170 and #818-170 primary and secondary centrifugal air filters, respectively (accordion-style) Separately-applied brake vent regulator valve and plumbing detail on underbody 3600-gallon fuel tank with early mounting brackets, inset dial gauge on right side, and early rear drain bar Separately-applied fuel fillers, drains, and breather piping on fuel tanks Separately-applied engine oil sump drain fitting with hose Separately-applied radiator water drain fitting on underbody Separately-applied truck air line plumbing on underbody above each truck, both sides Separately-applied wireform grab irons, wireform lift rings, etched windshield wipers, trainline hoses, sand hatch covers, and more Motor with 5-pole skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Paint colors match Tru-Color Paint color: TCP-109 C&NW Green TCP-353 C&NW Early Yellow Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended Radius: 22” DCC & sound-equipped locomotives also feature: DC/DCC & sound ready locomotives also feature: Operates on DC layouts DCC-ready with 21-pin connector

Vorbestellfrist für garantierte Lieferung: 26.02.2024

• DCC vorbereitet (Schnittstelle vorhanden)

Road Number-Specific ScaleTrains All-new model Era: 1980s – 1990s Series C&NW 5500-5537; ex-NYC 3010-3049, built Nov/Dec 1965 C&NW 5500 Lost-wax cast brass Leslie S-3-LR horn mounted on number board housing Standard “whip” communications antenna base mounted to cab roof Front EMD low plow with MU hose doors Replacement bearing pedestal liners White corner step edges and kickplates “OY” Scheme, “C&NW System” logo C&NW 5504 Lost-wax cast brass Leslie SU-3L-LR horn mounted on number board housing Excalibur low-profile “ice skate” communications antenna mounted to cab roof Front EMD medium plow without MU hose doors Green air reservoirs White corner step edges and yellow kickplates “OY” Scheme, “C&NW System” logo C&NW 5520 Lost-wax cast brass Leslie SU-3L-LR horn mounted on number board housing Excalibur low-profile “ice skate” communications antenna mounted to cab roof Front EMD medium plow without MU hose doors Yellow-painted nose bell White corner step edges and kickplates “OY” Scheme, “C&NW System” logo Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors, and round walkway light aft of raised walkway duct* LED-illuminated tri-color, flush-mounted front and rear class lights with raised gaskets LED-illuminated Tomar 804-1274 Strobe* Printed number boards with separately-controlled, backlit LED-illumination* 3-hose multiple unit (MU) hose groups with mounting bracket and gladhand detail Semi-scale coupler buffers equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers with straight rod extensions Notched-corner pilot face with square access plate, front and rear “Early” angled deck-mounted multiple unit (MU) receptacles, dual per end, front and rear “Short” stepwells with nub-bottom pilots, front and rear End handrails with deck and pilot face-mounted stanchions, front and rear Front and rear early small deck extension Positionable tapered (early) drop steps, front and rear Early treadplate 81” low short hood with ratchet handbrake Early straight grabs and “flipped” nut-bolt-washer (NBW) mounting on nose front and top Latched battery box doors with narrow louvers and tab-style (early) hinges Early cab sub-base doors without reinforcement ribs, both sides Single right rear cab step Cab Sub-Base Step Guards Early cab step guards (long taper) No hopper water piping underneath front battery box step Standard EMD high headlight with glare visors in numberboard housing “35-Line” cab with standard front windshields, and standard armrests, both sides Detailed cab interior with separate floor, cab blowers, rear wall, late seats with armrests, and standard AAR control stand Positionable cab side windows “Salem” combination mirror & windshield wing mounted ahead of the cab side windows, both sides Standard EMD sunshades with long mounting tracks Long hood with standard electrical cabinet seam, bolted generator compartment door, and early inertial drain hole placement (wide spacing on engineer’s side, low on fireman’s side) Small ECAFB Early (smooth) blower duct housing Early long handrail stanchion spacing with “short” stanchions at thin section of sidesill Early inertial air intake grilles without drip rails Standard turbo exhaust stack Early extended-range dynamic brake housing (short tapers), with retrofitted long contactor door See-through 48” standard-height dynamic brake fan housing with 10-blade fan and hub assembly, with spiral-grill and center cap Dynamic brake intakes with see-through intake vanes, and resistor grid detail inside of the housing Diamond-mesh radiator intake screening See-through standard-height 48” radiator fan housings with 8-blade fan and hub assembly Separately-applied radiator core detail mounted inside of long hood, visible under radiator fans Curved radiator fan grab iron Rear LED-illuminated horizontal headlight and standard housing Early rear sander door catch placement (inboard) Underbody frame rails with separately-applied plumbing and traction motor cable bundle details Detailed Blomberg-B truck frames (LFM-cast) with Hyatt bearing housings, separately-applied brake cylinders in released (piston retracted) position, elliptical springs, end transom detail, separate sanding lines and brackets, deleted outer brake shoes, and separate swing hanger detail Separately-applied flexible neoprene sanding lines at stepwell ends of trucks Rust-color painted wheelsets “Aeroquip” brand speed recorder with adapter flange mounted to right #2 axle ATC Pickup shoe on #1 axle, right side Standard 4 jacking pads Frame-mounted bell Salem-brand #824-170 and #818-170 primary and secondary centrifugal air filters, respectively (accordion-style) Separately-applied brake vent regulator valve and plumbing detail on underbody 3600-gallon fuel tank with early mounting brackets, inset dial gauge on right side, and early rear drain bar Separately-applied fuel fillers, drains, and breather piping on fuel tanks Separately-applied engine oil sump drain fitting with hose Separately-applied radiator water drain fitting on underbody Separately-applied truck air line plumbing on underbody above each truck, both sides Separately-applied wireform grab irons, wireform lift rings, etched windshield wipers, trainline hoses, sand hatch covers, and more Motor with 5-pole skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Paint colors match Tru-Color Paint color: TCP-109 C&NW Green TCP-353 C&NW Early Yellow Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended Radius: 22” DCC & sound-equipped locomotives also feature: DC/DCC & sound ready locomotives also feature: Operates on DC layouts DCC-ready with 21-pin connector

Vorbestellfrist für garantierte Lieferung: 26.02.2024

• DCC vorbereitet (Schnittstelle vorhanden)

Road Number-Specific ScaleTrains All-new model Era: 1980s – 1990s Series C&NW 5500-5537; ex-NYC 3010-3049, built Nov/Dec 1965 C&NW 5500 Lost-wax cast brass Leslie S-3-LR horn mounted on number board housing Standard “whip” communications antenna base mounted to cab roof Front EMD low plow with MU hose doors Replacement bearing pedestal liners White corner step edges and kickplates “OY” Scheme, “C&NW System” logo C&NW 5504 Lost-wax cast brass Leslie SU-3L-LR horn mounted on number board housing Excalibur low-profile “ice skate” communications antenna mounted to cab roof Front EMD medium plow without MU hose doors Green air reservoirs White corner step edges and yellow kickplates “OY” Scheme, “C&NW System” logo C&NW 5520 Lost-wax cast brass Leslie SU-3L-LR horn mounted on number board housing Excalibur low-profile “ice skate” communications antenna mounted to cab roof Front EMD medium plow without MU hose doors Yellow-painted nose bell White corner step edges and kickplates “OY” Scheme, “C&NW System” logo Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors, and round walkway light aft of raised walkway duct* LED-illuminated tri-color, flush-mounted front and rear class lights with raised gaskets LED-illuminated Tomar 804-1274 Strobe* Printed number boards with separately-controlled, backlit LED-illumination* 3-hose multiple unit (MU) hose groups with mounting bracket and gladhand detail Semi-scale coupler buffers equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers with straight rod extensions Notched-corner pilot face with square access plate, front and rear “Early” angled deck-mounted multiple unit (MU) receptacles, dual per end, front and rear “Short” stepwells with nub-bottom pilots, front and rear End handrails with deck and pilot face-mounted stanchions, front and rear Front and rear early small deck extension Positionable tapered (early) drop steps, front and rear Early treadplate 81” low short hood with ratchet handbrake Early straight grabs and “flipped” nut-bolt-washer (NBW) mounting on nose front and top Latched battery box doors with narrow louvers and tab-style (early) hinges Early cab sub-base doors without reinforcement ribs, both sides Single right rear cab step Cab Sub-Base Step Guards Early cab step guards (long taper) No hopper water piping underneath front battery box step Standard EMD high headlight with glare visors in numberboard housing “35-Line” cab with standard front windshields, and standard armrests, both sides Detailed cab interior with separate floor, cab blowers, rear wall, late seats with armrests, and standard AAR control stand Positionable cab side windows “Salem” combination mirror & windshield wing mounted ahead of the cab side windows, both sides Standard EMD sunshades with long mounting tracks Long hood with standard electrical cabinet seam, bolted generator compartment door, and early inertial drain hole placement (wide spacing on engineer’s side, low on fireman’s side) Small ECAFB Early (smooth) blower duct housing Early long handrail stanchion spacing with “short” stanchions at thin section of sidesill Early inertial air intake grilles without drip rails Standard turbo exhaust stack Early extended-range dynamic brake housing (short tapers), with retrofitted long contactor door See-through 48” standard-height dynamic brake fan housing with 10-blade fan and hub assembly, with spiral-grill and center cap Dynamic brake intakes with see-through intake vanes, and resistor grid detail inside of the housing Diamond-mesh radiator intake screening See-through standard-height 48” radiator fan housings with 8-blade fan and hub assembly Separately-applied radiator core detail mounted inside of long hood, visible under radiator fans Curved radiator fan grab iron Rear LED-illuminated horizontal headlight and standard housing Early rear sander door catch placement (inboard) Underbody frame rails with separately-applied plumbing and traction motor cable bundle details Detailed Blomberg-B truck frames (LFM-cast) with Hyatt bearing housings, separately-applied brake cylinders in released (piston retracted) position, elliptical springs, end transom detail, separate sanding lines and brackets, deleted outer brake shoes, and separate swing hanger detail Separately-applied flexible neoprene sanding lines at stepwell ends of trucks Rust-color painted wheelsets “Aeroquip” brand speed recorder with adapter flange mounted to right #2 axle ATC Pickup shoe on #1 axle, right side Standard 4 jacking pads Frame-mounted bell Salem-brand #824-170 and #818-170 primary and secondary centrifugal air filters, respectively (accordion-style) Separately-applied brake vent regulator valve and plumbing detail on underbody 3600-gallon fuel tank with early mounting brackets, inset dial gauge on right side, and early rear drain bar Separately-applied fuel fillers, drains, and breather piping on fuel tanks Separately-applied engine oil sump drain fitting with hose Separately-applied radiator water drain fitting on underbody Separately-applied truck air line plumbing on underbody above each truck, both sides Separately-applied wireform grab irons, wireform lift rings, etched windshield wipers, trainline hoses, sand hatch covers, and more Motor with 5-pole skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Paint colors match Tru-Color Paint color: TCP-109 C&NW Green TCP-353 C&NW Early Yellow Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended Radius: 22” DCC & sound-equipped locomotives also feature: DC/DCC & sound ready locomotives also feature: Operates on DC layouts DCC-ready with 21-pin connector

Vorbestellfrist für garantierte Lieferung: 26.02.2024

• mit DCC Motordekoder
• mit Sound

Road Number-Specific ScaleTrains All-new model Era: 1980s – 1990s Series C&NW 5500-5537; ex-NYC 3010-3049, built Nov/Dec 1965 C&NW 5505 Lost-wax cast brass Leslie S-3-LR horn mounted on number board housing Excalibur low-profile “ice skate” communications antenna mounted to cab roof Front EMD low plow with MU hose doors White corner step edges and kickplates “OY” Scheme, “Employee Owned” logo C&NW 5506 Lost-wax cast brass Leslie SU-3L-LR horn mounted on number board housing Excalibur low-profile “ice skate” communications antenna mounted to cab roof Front EMD medium plow without MU hose doors Green walkway duct Green air reservoirs White corner step edges and kickplates “OY” Scheme, “Employee Owned” logo C&NW 5525 Lost-wax cast brass Leslie S-3-LR horn mounted on number board housing Excalibur low-profile “ice skate” communications antenna mounted to cab roof Front EMD medium plow without MU hose doors Green walkway duct Green air reservoirs White corner step edges and kickplates “OY” Scheme, “Employee Owned” logo Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors, and round walkway light aft of raised walkway duct* LED-illuminated tri-color, flush-mounted front and rear class lights with raised gaskets LED-illuminated Tomar 804-1274 Strobe* Printed number boards with separately-controlled, backlit LED-illumination* 3-hose multiple unit (MU) hose groups with mounting bracket and gladhand detail Semi-scale coupler buffers equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers with straight rod extensions Notched-corner pilot face with square access plate, front and rear “Early” angled deck-mounted multiple unit (MU) receptacles, dual per end, front and rear “Short” stepwells with nub-bottom pilots, front and rear End handrails with deck and pilot face-mounted stanchions, front and rear Front and rear early small deck extension Positionable tapered (early) drop steps, front and rear Early treadplate 81” low short hood with ratchet handbrake Early straight grabs and “flipped” nut-bolt-washer (NBW) mounting on nose front and top Latched battery box doors with narrow louvers and tab-style (early) hinges Early cab sub-base doors without reinforcement ribs, both sides Single right rear cab step Cab Sub-Base Step Guards Early cab step guards (long taper) No hopper water piping underneath front battery box step Standard EMD high headlight with glare visors in numberboard housing “35-Line” cab with standard front windshields, and standard armrests, both sides Detailed cab interior with separate floor, cab blowers, rear wall, late seats with armrests, and standard AAR control stand Positionable cab side windows “Salem” combination mirror & windshield wing mounted ahead of the cab side windows, both sides Standard EMD sunshades with long mounting tracks Long hood with standard electrical cabinet seam, bolted generator compartment door, and early inertial drain hole placement (wide spacing on engineer’s side, low on fireman’s side) Small ECAFB Early (smooth) blower duct housing Early long handrail stanchion spacing with “short” stanchions at thin section of sidesill Early inertial air intake grilles without drip rails Standard turbo exhaust stack Early extended-range dynamic brake housing (short tapers), with retrofitted long contactor door See-through 48” standard-height dynamic brake fan housing with 10-blade fan and hub assembly, with spiral-grill and center cap Dynamic brake intakes with see-through intake vanes, and resistor grid detail inside of the housing Diamond-mesh radiator intake screening See-through standard-height 48” radiator fan housings with 8-blade fan and hub assembly Separately-applied radiator core detail mounted inside of long hood, visible under radiator fans Curved radiator fan grab iron Rear LED-illuminated horizontal headlight and standard housing Early rear sander door catch placement (inboard) Underbody frame rails with separately-applied plumbing and traction motor cable bundle details Detailed Blomberg-B truck frames (LFM-cast) with Hyatt bearing housings, separately-applied brake cylinders in released (piston retracted) position, elliptical springs, end transom detail, separate sanding lines and brackets, deleted outer brake shoes, and separate swing hanger detail Separately-applied flexible neoprene sanding lines at stepwell ends of trucks Rust-color painted wheelsets “Aeroquip” brand speed recorder with adapter flange mounted to right #2 axle ATC Pickup shoe on #1 axle, right side Standard 4 jacking pads Frame-mounted bell Salem-brand #824-170 and #818-170 primary and secondary centrifugal air filters, respectively (accordion-style) Separately-applied brake vent regulator valve and plumbing detail on underbody 3600-gallon fuel tank with early mounting brackets, inset dial gauge on right side, and early rear drain bar Separately-applied fuel fillers, drains, and breather piping on fuel tanks Separately-applied engine oil sump drain fitting with hose Separately-applied radiator water drain fitting on underbody Separately-applied truck air line plumbing on underbody above each truck, both sides Separately-applied wireform grab irons, wireform lift rings, etched windshield wipers, trainline hoses, sand hatch covers, and more Motor with 5-pole skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Paint colors match Tru-Color Paint color: TCP-109 C&NW Green TCP-353 C&NW Early Yellow Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended Radius: 22” DCC & sound-equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged EMD 16-645 prime mover sounds ESU designed “PowerPack” with two super capacitors**** Operates on both DC and DCC layouts

Vorbestellfrist für garantierte Lieferung: 26.02.2024

• mit DCC Motordekoder
• mit Sound

Road Number-Specific ScaleTrains All-new model Era: 1980s – 1990s Series C&NW 5500-5537; ex-NYC 3010-3049, built Nov/Dec 1965 C&NW 5505 Lost-wax cast brass Leslie S-3-LR horn mounted on number board housing Excalibur low-profile “ice skate” communications antenna mounted to cab roof Front EMD low plow with MU hose doors White corner step edges and kickplates “OY” Scheme, “Employee Owned” logo C&NW 5506 Lost-wax cast brass Leslie SU-3L-LR horn mounted on number board housing Excalibur low-profile “ice skate” communications antenna mounted to cab roof Front EMD medium plow without MU hose doors Green walkway duct Green air reservoirs White corner step edges and kickplates “OY” Scheme, “Employee Owned” logo C&NW 5525 Lost-wax cast brass Leslie S-3-LR horn mounted on number board housing Excalibur low-profile “ice skate” communications antenna mounted to cab roof Front EMD medium plow without MU hose doors Green walkway duct Green air reservoirs White corner step edges and kickplates “OY” Scheme, “Employee Owned” logo Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors, and round walkway light aft of raised walkway duct* LED-illuminated tri-color, flush-mounted front and rear class lights with raised gaskets LED-illuminated Tomar 804-1274 Strobe* Printed number boards with separately-controlled, backlit LED-illumination* 3-hose multiple unit (MU) hose groups with mounting bracket and gladhand detail Semi-scale coupler buffers equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers with straight rod extensions Notched-corner pilot face with square access plate, front and rear “Early” angled deck-mounted multiple unit (MU) receptacles, dual per end, front and rear “Short” stepwells with nub-bottom pilots, front and rear End handrails with deck and pilot face-mounted stanchions, front and rear Front and rear early small deck extension Positionable tapered (early) drop steps, front and rear Early treadplate 81” low short hood with ratchet handbrake Early straight grabs and “flipped” nut-bolt-washer (NBW) mounting on nose front and top Latched battery box doors with narrow louvers and tab-style (early) hinges Early cab sub-base doors without reinforcement ribs, both sides Single right rear cab step Cab Sub-Base Step Guards Early cab step guards (long taper) No hopper water piping underneath front battery box step Standard EMD high headlight with glare visors in numberboard housing “35-Line” cab with standard front windshields, and standard armrests, both sides Detailed cab interior with separate floor, cab blowers, rear wall, late seats with armrests, and standard AAR control stand Positionable cab side windows “Salem” combination mirror & windshield wing mounted ahead of the cab side windows, both sides Standard EMD sunshades with long mounting tracks Long hood with standard electrical cabinet seam, bolted generator compartment door, and early inertial drain hole placement (wide spacing on engineer’s side, low on fireman’s side) Small ECAFB Early (smooth) blower duct housing Early long handrail stanchion spacing with “short” stanchions at thin section of sidesill Early inertial air intake grilles without drip rails Standard turbo exhaust stack Early extended-range dynamic brake housing (short tapers), with retrofitted long contactor door See-through 48” standard-height dynamic brake fan housing with 10-blade fan and hub assembly, with spiral-grill and center cap Dynamic brake intakes with see-through intake vanes, and resistor grid detail inside of the housing Diamond-mesh radiator intake screening See-through standard-height 48” radiator fan housings with 8-blade fan and hub assembly Separately-applied radiator core detail mounted inside of long hood, visible under radiator fans Curved radiator fan grab iron Rear LED-illuminated horizontal headlight and standard housing Early rear sander door catch placement (inboard) Underbody frame rails with separately-applied plumbing and traction motor cable bundle details Detailed Blomberg-B truck frames (LFM-cast) with Hyatt bearing housings, separately-applied brake cylinders in released (piston retracted) position, elliptical springs, end transom detail, separate sanding lines and brackets, deleted outer brake shoes, and separate swing hanger detail Separately-applied flexible neoprene sanding lines at stepwell ends of trucks Rust-color painted wheelsets “Aeroquip” brand speed recorder with adapter flange mounted to right #2 axle ATC Pickup shoe on #1 axle, right side Standard 4 jacking pads Frame-mounted bell Salem-brand #824-170 and #818-170 primary and secondary centrifugal air filters, respectively (accordion-style) Separately-applied brake vent regulator valve and plumbing detail on underbody 3600-gallon fuel tank with early mounting brackets, inset dial gauge on right side, and early rear drain bar Separately-applied fuel fillers, drains, and breather piping on fuel tanks Separately-applied engine oil sump drain fitting with hose Separately-applied radiator water drain fitting on underbody Separately-applied truck air line plumbing on underbody above each truck, both sides Separately-applied wireform grab irons, wireform lift rings, etched windshield wipers, trainline hoses, sand hatch covers, and more Motor with 5-pole skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Paint colors match Tru-Color Paint color: TCP-109 C&NW Green TCP-353 C&NW Early Yellow Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum radius: 18” Recommended Radius: 22” DCC & sound-equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” functions Two (2) cube-type speakers Turbocharged EMD 16-645 prime mover sounds ESU designed “PowerPack” with two super capacitors**** Operates on both DC and DCC layouts