Neuerscheinung! Auslieferung April 2025

Road Number Specific ScaleTrains All-new model Era: 1964 to early 1970s DRGW Series 63900 to 63924; built 9/1964 Fully-assembled Multiple road numbers Car body side configuration: recessed panel - 10 panels - door opening - 10 panels - recessed panel; each panel has a single weld (double-door) Double 10’ plug doors with two door hangers per door Separate door rod and handle detail Separate lower door track detail Tack boards mounted on side doors Tall side and end ladders With roofwalk High brake wheel and brake wheel housing with Apex (slotted) platform Photo-etched stainless-steel see-through short (between end ladders) Apex (slotted) coupler crossover platform Straight side sill Semi-scale coupler boxes Durable body-mounted die-cast metal semi-scale standard Type E couplers Keystone 20” sliding sill cushion underframe with six supports; support ends cut at an angle Highly-detailed 70-ton ASF Ride Control trucks with finely rendered raised foundry data; rotating black Timken three-sided bearing caps; separate “truck-mounted brake” brake beams; and side bearing detail 33” machined metal wheels with accurately profiled .110” wide wheel tread Operates on Code 70, 83 and 100 rail Body mounted brakes Brake plumbing with separate air reservoir, control valve, and retainer valve; separately applied wireform plumbing including trainline pipe with brackets Factory painted and applied metal grab irons; coupler cut levers; and trainline hoses with silver gladhands Printing and lettering legible even under magnification Paint colors match Tru-Color Paint color: TCP-216 DRGW Freight Car Red Weighted to Industry standards for reliable operation Packaging safely stores model Minimum radius: 22” Recommended radius: 24”

Neuerscheinung! Auslieferung April 2025

Road Number Specific ScaleTrains All-new model Era: 1964 to early 1970s DRGW Series 63900 to 63924; built 9/1964 Fully-assembled Multiple road numbers Car body side configuration: recessed panel - 10 panels - door opening - 10 panels - recessed panel; each panel has a single weld (double-door) Double 10’ plug doors with two door hangers per door Separate door rod and handle detail Separate lower door track detail Tack boards mounted on side doors Tall side and end ladders With roofwalk High brake wheel and brake wheel housing with Apex (slotted) platform Photo-etched stainless-steel see-through short (between end ladders) Apex (slotted) coupler crossover platform Straight side sill Semi-scale coupler boxes Durable body-mounted die-cast metal semi-scale standard Type E couplers Keystone 20” sliding sill cushion underframe with six supports; support ends cut at an angle Highly-detailed 70-ton ASF Ride Control trucks with finely rendered raised foundry data; rotating black Timken three-sided bearing caps; separate “truck-mounted brake” brake beams; and side bearing detail 33” machined metal wheels with accurately profiled .110” wide wheel tread Operates on Code 70, 83 and 100 rail Body mounted brakes Brake plumbing with separate air reservoir, control valve, and retainer valve; separately applied wireform plumbing including trainline pipe with brackets Factory painted and applied metal grab irons; coupler cut levers; and trainline hoses with silver gladhands Printing and lettering legible even under magnification Paint colors match Tru-Color Paint color: TCP-216 DRGW Freight Car Red Weighted to Industry standards for reliable operation Packaging safely stores model Minimum radius: 22” Recommended radius: 24”

Neuerscheinung! Auslieferung April 2025

Road Number Specific ScaleTrains All-new model Era: 1964 to early 1970s CNW Series 92000 to 92024; built 8/1964-1/1965 Fully-assembled Multiple road numbers Car body side configuration: recessed panel - 10 panels - door opening - 10 panels - recessed panel; each panel has a single weld (double-door) Double 10’ plug doors with two door hangers per door Separate door rod and handle detail Separate lower door track detail Tack boards mounted on side doors Tall side and end ladders With roofwalk High brake wheel and brake wheel housing with Apex (slotted) platform Photo-etched stainless-steel see-through short (between end ladders) Apex (slotted) coupler crossover platform Straight side sill Semi-scale coupler boxes Durable body-mounted die-cast metal semi-scale standard Type E couplers Keystone 20” sliding sill cushion underframe with six supports; support ends cut at an angle Highly-detailed 70-ton ASF Ride Control trucks with finely rendered raised foundry data; rotating black Timken three-sided bearing caps; separate “truck-mounted brake” brake beams; and side bearing detail 33” machined metal wheels with accurately profiled .110” wide wheel tread Operates on Code 70, 83 and 100 rail Body mounted brakes Brake plumbing with separate air reservoir, control valve, and retainer valve; separately applied wireform plumbing including trainline pipe with brackets Factory painted and applied metal grab irons; coupler cut levers; and trainline hoses with silver gladhands Printing and lettering legible even under magnification Paint colors match Tru-Color Paint color: TCP-183 CNW Freight Car Brown Weighted to Industry standards for reliable operation Packaging safely stores model Minimum radius: 22” Recommended radius: 24”

Neuerscheinung! Auslieferung April 2025

Road Number Specific ScaleTrains All-new model Era: 1964 to early 1970s CNW Series 92000 to 92024; built 8/1964-1/1965 Fully-assembled Multiple road numbers Car body side configuration: recessed panel - 10 panels - door opening - 10 panels - recessed panel; each panel has a single weld (double-door) Double 10’ plug doors with two door hangers per door Separate door rod and handle detail Separate lower door track detail Tack boards mounted on side doors Tall side and end ladders With roofwalk High brake wheel and brake wheel housing with Apex (slotted) platform Photo-etched stainless-steel see-through short (between end ladders) Apex (slotted) coupler crossover platform Straight side sill Semi-scale coupler boxes Durable body-mounted die-cast metal semi-scale standard Type E couplers Keystone 20” sliding sill cushion underframe with six supports; support ends cut at an angle Highly-detailed 70-ton ASF Ride Control trucks with finely rendered raised foundry data; rotating black Timken three-sided bearing caps; separate “truck-mounted brake” brake beams; and side bearing detail 33” machined metal wheels with accurately profiled .110” wide wheel tread Operates on Code 70, 83 and 100 rail Body mounted brakes Brake plumbing with separate air reservoir, control valve, and retainer valve; separately applied wireform plumbing including trainline pipe with brackets Factory painted and applied metal grab irons; coupler cut levers; and trainline hoses with silver gladhands Printing and lettering legible even under magnification Paint colors match Tru-Color Paint color: TCP-183 CNW Freight Car Brown Weighted to Industry standards for reliable operation Packaging safely stores model Minimum radius: 22” Recommended radius: 24”

Neuerscheinung! Auslieferung April 2025

Road Number Specific ScaleTrains All-new model Era: 1964 to early 1970s CNW Series 92000 to 92024; built 8/1964-1/1965 Fully-assembled Multiple road numbers Car body side configuration: recessed panel - 10 panels - door opening - 10 panels - recessed panel; each panel has a single weld (double-door) Double 10’ plug doors with two door hangers per door Separate door rod and handle detail Separate lower door track detail Tack boards mounted on side doors Tall side and end ladders With roofwalk High brake wheel and brake wheel housing with Apex (slotted) platform Photo-etched stainless-steel see-through short (between end ladders) Apex (slotted) coupler crossover platform Straight side sill Semi-scale coupler boxes Durable body-mounted die-cast metal semi-scale standard Type E couplers Keystone 20” sliding sill cushion underframe with six supports; support ends cut at an angle Highly-detailed 70-ton ASF Ride Control trucks with finely rendered raised foundry data; rotating black Timken three-sided bearing caps; separate “truck-mounted brake” brake beams; and side bearing detail 33” machined metal wheels with accurately profiled .110” wide wheel tread Operates on Code 70, 83 and 100 rail Body mounted brakes Brake plumbing with separate air reservoir, control valve, and retainer valve; separately applied wireform plumbing including trainline pipe with brackets Factory painted and applied metal grab irons; coupler cut levers; and trainline hoses with silver gladhands Printing and lettering legible even under magnification Paint colors match Tru-Color Paint color: TCP-183 CNW Freight Car Brown Weighted to Industry standards for reliable operation Packaging safely stores model Minimum radius: 22” Recommended radius: 24”

Neuerscheinung! Auslieferung April 2025

Road Number Specific ScaleTrains All-new model Era: 1964 to early 1970s Southern Series 42300 to 42355; built 10/1964 Fully-assembled Multiple road numbers Car body side configuration: recessed panel - 10 panels - door opening - 10 panels - recessed panel; each panel has a single weld (double-door) Double 10’ plug doors with two door hangers per door Separate door rod and handle detail Separate lower door track detail Tack boards mounted on side doors Tall side and end ladders With roofwalk High brake wheel and brake wheel housing with Apex (slotted) platform Photo-etched stainless-steel see-through short (between end ladders) Apex (slotted) coupler crossover platform Straight side sill Semi-scale coupler boxes Durable body-mounted die-cast metal semi-scale standard Type E couplers Keystone 20” sliding sill cushion underframe with six supports; support ends cut at an angle Highly-detailed 70-ton ASF Ride Control trucks with finely rendered raised foundry data; rotating black Timken three-sided bearing caps; separate “truck-mounted brake” brake beams; and side bearing detail 33” machined metal wheels with accurately profiled .110” wide wheel tread Operates on Code 70, 83 and 100 rail Body mounted brakes Brake plumbing with separate air reservoir, control valve, and retainer valve; separately applied wireform plumbing including trainline pipe with brackets Factory painted and applied metal grab irons; coupler cut levers; and trainline hoses with silver gladhands Printing and lettering legible even under magnification Paint colors match Tru-Color Paint color: TCP-224 Southern Freight Car Red Weighted to Industry standards for reliable operation Packaging safely stores model Minimum radius: 22” Recommended radius: 24”

Neuerscheinung! Auslieferung April 2025

Road Number Specific ScaleTrains All-new model Era: 1964 to early 1970s Southern Series 42300 to 42355; built 10/1964 Fully-assembled Multiple road numbers Car body side configuration: recessed panel - 10 panels - door opening - 10 panels - recessed panel; each panel has a single weld (double-door) Double 10’ plug doors with two door hangers per door Separate door rod and handle detail Separate lower door track detail Tack boards mounted on side doors Tall side and end ladders With roofwalk High brake wheel and brake wheel housing with Apex (slotted) platform Photo-etched stainless-steel see-through short (between end ladders) Apex (slotted) coupler crossover platform Straight side sill Semi-scale coupler boxes Durable body-mounted die-cast metal semi-scale standard Type E couplers Keystone 20” sliding sill cushion underframe with six supports; support ends cut at an angle Highly-detailed 70-ton ASF Ride Control trucks with finely rendered raised foundry data; rotating black Timken three-sided bearing caps; separate “truck-mounted brake” brake beams; and side bearing detail 33” machined metal wheels with accurately profiled .110” wide wheel tread Operates on Code 70, 83 and 100 rail Body mounted brakes Brake plumbing with separate air reservoir, control valve, and retainer valve; separately applied wireform plumbing including trainline pipe with brackets Factory painted and applied metal grab irons; coupler cut levers; and trainline hoses with silver gladhands Printing and lettering legible even under magnification Paint colors match Tru-Color Paint color: TCP-224 Southern Freight Car Red Weighted to Industry standards for reliable operation Packaging safely stores model Minimum radius: 22” Recommended radius: 24”

Neuerscheinung! Auslieferung April 2025

Road Number Specific ScaleTrains All-new model Era: 1964 to early 1970s Southern Series 42300 to 42355; built 10/1964 Fully-assembled Multiple road numbers Car body side configuration: recessed panel - 10 panels - door opening - 10 panels - recessed panel; each panel has a single weld (double-door) Double 10’ plug doors with two door hangers per door Separate door rod and handle detail Separate lower door track detail Tack boards mounted on side doors Tall side and end ladders With roofwalk High brake wheel and brake wheel housing with Apex (slotted) platform Photo-etched stainless-steel see-through short (between end ladders) Apex (slotted) coupler crossover platform Straight side sill Semi-scale coupler boxes Durable body-mounted die-cast metal semi-scale standard Type E couplers Keystone 20” sliding sill cushion underframe with six supports; support ends cut at an angle Highly-detailed 70-ton ASF Ride Control trucks with finely rendered raised foundry data; rotating black Timken three-sided bearing caps; separate “truck-mounted brake” brake beams; and side bearing detail 33” machined metal wheels with accurately profiled .110” wide wheel tread Operates on Code 70, 83 and 100 rail Body mounted brakes Brake plumbing with separate air reservoir, control valve, and retainer valve; separately applied wireform plumbing including trainline pipe with brackets Factory painted and applied metal grab irons; coupler cut levers; and trainline hoses with silver gladhands Printing and lettering legible even under magnification Paint colors match Tru-Color Paint color: TCP-224 Southern Freight Car Red Weighted to Industry standards for reliable operation Packaging safely stores model Minimum radius: 22” Recommended radius: 24”

Neuerscheinung! Auslieferung April 2025

Road Number Specific ScaleTrains All-new model Era: 1964 to early 1970s ATSF Series 36840 to 36889; built 4-6/1964 Fully-assembled Multiple road numbers Car body side configuration: recessed panel - 10 panels - door opening - 10 panels - recessed panel; each panel has a single weld (double-door) Double 10’ plug doors with two door hangers per door Separate door rod and handle detail Separate lower door track detail Tack boards mounted on side doors Tall side and end ladders With roofwalk High brake wheel and brake wheel housing with Apex (slotted) platform Photo-etched stainless-steel see-through short (between end ladders) Apex (slotted) coupler crossover platform Straight side sill Semi-scale coupler boxes Durable body-mounted die-cast metal semi-scale standard Type E couplers Keystone 20” sliding sill cushion underframe with six supports; support ends cut at an angle Highly-detailed 70-ton ASF Ride Control trucks with finely rendered raised foundry data; rotating black Timken three-sided bearing caps; separate “truck-mounted brake” brake beams; and side bearing detail 33” machined metal wheels with accurately profiled .110” wide wheel tread Operates on Code 70, 83 and 100 rail Body mounted brakes Brake plumbing with separate air reservoir, control valve, and retainer valve; separately applied wireform plumbing including trainline pipe with brackets Factory painted and applied metal grab irons; coupler cut levers; and trainline hoses with silver gladhands Printing and lettering legible even under magnification Weighted to Industry standards for reliable operation Packaging safely stores model Minimum radius: 22” Recommended radius: 24”

Neuerscheinung! Auslieferung April 2025

Road Number Specific ScaleTrains All-new model Era: 1964 to early 1970s ATSF Series 36840 to 36889; built 4-6/1964 Fully-assembled Multiple road numbers Car body side configuration: recessed panel - 10 panels - door opening - 10 panels - recessed panel; each panel has a single weld (double-door) Double 10’ plug doors with two door hangers per door Separate door rod and handle detail Separate lower door track detail Tack boards mounted on side doors Tall side and end ladders With roofwalk High brake wheel and brake wheel housing with Apex (slotted) platform Photo-etched stainless-steel see-through short (between end ladders) Apex (slotted) coupler crossover platform Straight side sill Semi-scale coupler boxes Durable body-mounted die-cast metal semi-scale standard Type E couplers Keystone 20” sliding sill cushion underframe with six supports; support ends cut at an angle Highly-detailed 70-ton ASF Ride Control trucks with finely rendered raised foundry data; rotating black Timken three-sided bearing caps; separate “truck-mounted brake” brake beams; and side bearing detail 33” machined metal wheels with accurately profiled .110” wide wheel tread Operates on Code 70, 83 and 100 rail Body mounted brakes Brake plumbing with separate air reservoir, control valve, and retainer valve; separately applied wireform plumbing including trainline pipe with brackets Factory painted and applied metal grab irons; coupler cut levers; and trainline hoses with silver gladhands Printing and lettering legible even under magnification Weighted to Industry standards for reliable operation Packaging safely stores model Minimum radius: 22” Recommended radius: 24”

Neuerscheinung! Auslieferung April 2025

Road Number Specific ScaleTrains All-new model Era: 1964 to early 1970s ATSF Series 36840 to 36889; built 4-6/1964 Fully-assembled Multiple road numbers Car body side configuration: recessed panel - 10 panels - door opening - 10 panels - recessed panel; each panel has a single weld (double-door) Double 10’ plug doors with two door hangers per door Separate door rod and handle detail Separate lower door track detail Tack boards mounted on side doors Tall side and end ladders With roofwalk High brake wheel and brake wheel housing with Apex (slotted) platform Photo-etched stainless-steel see-through short (between end ladders) Apex (slotted) coupler crossover platform Straight side sill Semi-scale coupler boxes Durable body-mounted die-cast metal semi-scale standard Type E couplers Keystone 20” sliding sill cushion underframe with six supports; support ends cut at an angle Highly-detailed 70-ton ASF Ride Control trucks with finely rendered raised foundry data; rotating black Timken three-sided bearing caps; separate “truck-mounted brake” brake beams; and side bearing detail 33” machined metal wheels with accurately profiled .110” wide wheel tread Operates on Code 70, 83 and 100 rail Body mounted brakes Brake plumbing with separate air reservoir, control valve, and retainer valve; separately applied wireform plumbing including trainline pipe with brackets Factory painted and applied metal grab irons; coupler cut levers; and trainline hoses with silver gladhands Printing and lettering legible even under magnification Weighted to Industry standards for reliable operation Packaging safely stores model Minimum radius: 22” Recommended radius: 24”

• mit DCC Motordekoder
• mit Sound

Road Number Specific ScaleTrains All-new model Era: 2007+ Series 100 to 199; built 4-5/95 Road number 177 Yellow swapped HVAC unit Yellow sill stripes Gray swapped air tanks Road number 199 Gray swapped HVAC unit Yellow sill stripes Gray swapped air tanks Fully-assembled Multiple road numbers LED-illuminated front deck-mounted ditch lights LED-illuminated high-mount cab number boards* Directional LED-illuminated headlights Painted and factory-applied detail parts: wire grab irons; trainline hoses with silver gladhands; 3-hose MU clusters with silver gladhands; MU cable, uncoupling levers; windshield wipers; mirrors; sunshades; brake wheel; and more Tall snowplow with open doors and grab irons Semi-scale Type E knuckle couplers – Micro-Trains® compatible Body mounted coupler box – accepts Micro-Trains® 1015/1016 type couplers without modification 5-step stepwells Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Nose door with window Two-piece nose top grab irons Front LED-illuminated headlight with lenses on low short hood (low headlight) Battery cabinet access door without latch GE safety cab with three (3) side windows Right side cab under floor access doors: four screened louver sections per door Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit Detailed cab interior with floor, rear wall, seats, and desktop Tinted cab side windows Large Sinclair “ice skate” communication antenna; small Sinclair “ice skate” End of Train (EOT) telemetry antenna Early: six (6) tall vertical rectangular bolted panels and three (3) horizontal short panels Continuous reinforcement rib under dynamic brake intake grilles Standard dynamic brake exhaust (2-port) Forward right-side air intake grille Left side auxiliary cab: three (3) tall doors with latches on the #2 Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Early curved engine cab profile Lost-wax brass cast Nathan AirChime P3 (P24R1 configuration) horn mounted on engine cab “Bathtub” exhaust silencer 2 individually applied etched metal radiator exhaust grilles. Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, short grilles Low-mounted rear sandfiller Early “box” lifting lugs on ends of radiator wings Rear LED-illuminated vertical headlight with lenses Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders and air plumbing Dual Graham-White (Prime) 975-075 air filters Graham-White 975-100 “twin tower” air filter dryer 5,000 gallon fuel tank Single fuel fills per side Round and vertical analog fuel gauges; digital fuel gauges Fuel tank mounted steel bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Early square handbrake chain bracket SP-style spare coupler knuckle boxes on rear pilot face Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum Radius: 9 ¾” Recommended Radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 Nano DCC & sound decoder with “Full Throttle” Cube-type speaker Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts DC/DCC ready locomotives also feature: Operates on DC layouts DCC ready with Nano connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate

• mit DCC Motordekoder
• mit Sound

Road Number Specific ScaleTrains All-new model Era: 1997 to Early-2000s Series 7143 to 7244, built 10/97 Road numbers 7143, 7150 and 7157 Red sill stripe Fully-assembled LED-illuminated front deck-mounted ditch lights LED-illuminated high-mount cab number boards* Directional LED-illuminated headlights Painted and factory-applied detail parts: wire grab irons; trainline hoses with silver gladhands; 3-hose MU clusters with silver gladhands; MU cable, uncoupling levers; windshield wipers; mirrors; sunshades; brake wheel; and more Tall snowplow with open doors and grab irons Semi-scale Type E knuckle couplers – Micro-Trains® compatible Body mounted coupler box – accepts Micro-Trains® 1015/1016 type couplers without modification 5-step stepwells Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Nose door without window Two-piece nose top grab irons Front LED-illuminated headlight with lenses on low short hood (low headlight) Battery cabinet access door without latch GE safety cab with three (3) side windows Right side cab under floor access doors: dual large louver panels per door Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit Detailed cab interior with floor, rear wall, seats, and desktop Tinted cab side windows Antennas Octagonal antenna dome with small square dome Early: six (6) tall vertical rectangular bolted panels and three (3) horizontal short panels Continuous reinforcement rib under dynamic brake intake grilles Standard dynamic brake exhaust (2-port) Forward right-side air intake grille Left side auxiliary cab: three (3) medium doors with latches on the #2 door Capacitor box on left side walkway Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Late angled engine cab profile with tri-fold power assembly access doors Lost-wax brass cast Nathan AirChime K3LAR2 horn mounted on engine cab “Bathtub” exhaust silencer 2 individually applied etched metal radiator exhaust grilles. Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, tall grilles Low-mounted rear sandfiller Early “box” lifting lugs on ends of radiator wings Rear LED-illuminated vertical headlight with lenses Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders and air plumbing Dual Graham-White (Salem) 824-100 centrifugal air filters No air dryer 5,000 gallon fuel tank Single fuel fills per side Round and vertical analog fuel gauges; digital fuel gauges Fuel tank mounted steel bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Early square handbrake chain bracket Spare coupler knuckle holders on rear pilot face Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum Radius: 9 ¾” Recommended Radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 Nano DCC & sound decoder with “Full Throttle” Cube-type speaker Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts DC/DCC ready locomotives also feature: Operates on DC layouts DCC ready with Nano connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate

• mit DCC Motordekoder
• mit Sound

New roadname Era: 1963 to early 1970s Series 1246 to 1284; built 1-6:1963 Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* Operating LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** Cab and rear number boards Front and rear multiple unit (MU) hose catch boxes and footboards 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with increased length on left (fireman’s) side and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Cab side vent on left side Sliding cab side windows Small mirrors mounted fore of cab side windows on both sides of cab No sunshades or sunshade tracks Lost-wax brass cast Leslie Supertyfon S-2M over the cab engineers side and single chime S-25 over the cab conductors side Bendix-King 'can' style antenna mounted on cab roof Accurate hood door and long hood detail Late single-panel inertial compartment Wire inertial air intake grills Tall turbo exhaust stack Standard-range dynamic brakes with 48” fan Early See-through dynamic brake intake grills with horizontal wires through vertical vanes 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Curved radiator fan grab iron Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with square and sloped bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bronze bell No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22”

Neuerscheinung! Auslieferung April 2025

Vorbestellfrist für garantierte Lieferung: 24.06.2024

• mit DCC Motordekoder
• mit Sound

New paint scheme Era: early 2000s to 2005 UP series mixed; ex-SP 8230 to 8299; built 3/80 to 7/80 Road number 8865; ex-SP 8288 UP “Patch” former Southern Pacific railroad roman lettered Fully-assembled No truck ground lights (prototype not equipped) LED-illuminated front deck mounted ditch lights** LED-illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct* Plated over front and blanked rear red Pyle-National 17540 “UDE” Gyralites Blanked class lights with gaskets on front and bolted plates on rear Printed number boards with separately controlled backlit LED-illumination* Directional LED headlights Front late SP/UP-style pilot plow with MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Front "tall" stepwells with see-through steps and rear “ladder” steps 88” low short hood with wheel handbrake Bolted battery box doors with wide louvers Late cab sub-base doors with lift-off hinges SP nose headlight package Dash-2 cab with welded side window panels, SP/SSW blue flag bracket, and modified “L” front window Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Cab front door with additional door lock at top of door Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Rectangular vent on left cab side, towards rear of cab Standard EMD sunshades and long sunshade tracks Vapor Corp. cab roof HVAC Lost-wax brass Nathan K3HA three-chime horn with shower caps on clearance bracket, relocated to long hood roof “Whip” radio antenna mounted on ground plane over dust bin Late electrical cabinet "zig-zag" seam, closer to rear of cab Welded ECAFB (late) Late inertial air intake grilles with top and bottom drip rail "Post 1980" extended-range dynamic brake with exhaust silencer Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets Straight rear uncoupling lever with four mounting brackets Handrail set with anticlimber front and rear end railing with outward facing mounting brackets, “breakaway” inner stanchions and chain Handrail ends and step faces painted white Front and rear 3-hose MU hose clusters with silver gladhands Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers Notched pilot faces with high mounted angled lifting slots Pilot-face mounted MU receptacle Front narrow “blunt” front anticlimber rear full-width front pilot anticlimber Scale sectioned treadplate detail on walkways Accurate hood door and long hood detail “Post-1980” exhaust silencer See-through dynamic brake intakes with resistor grid detail See-through standard 48” dynamic brake fan housings with fan blades visible inside Detailed see-through radiator intake compartment with front and rear bulkheads, floor treadplate, and fan motor detail Etched-metal radiator exhaust grills with radiator shutters visible underneath Separate radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, late center axle snubbers, sanding lines and brackets (outboard only), and D-77 traction motor and air duct details Dimensionally accurate truck centers Speed recorder first axle, left side Forward facing handbrake chain mount for Flexicoil trucks Four-hole SP jacking pads Spare knuckle holders on rear pilot along with spare knuckle boxes mounted to truck sideframes Sill-mounted EFCO Frame-mounted bell Double Graham-White (Prime) brand 975-075 (can style) Standard air tanks 4,400 gallon fuel tank with reinforced tank edges where sides meet the tank ends, dual fuel fillers, dual vertical gauges, round gauge on stand and vertical breather pipe Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Dual cube-type speakers EMD 16 Cylinder 645E3 prime mover ESU designed “PowerPack” with two super capacitors**** Operates on both DC and DCC layouts

Neuerscheinung! Auslieferung April 2025

Vorbestellfrist für garantierte Lieferung: 24.06.2024

• DCC vorbereitet (Schnittstelle vorhanden)

New paint scheme Era: early 2000s to 2005 UP series mixed; ex-SP 8230 to 8299; built 3/80 to 7/80 Road number 8865; ex-SP 8288 UP “Patch” former Southern Pacific railroad roman lettered Fully-assembled No truck ground lights (prototype not equipped) LED-illuminated front deck mounted ditch lights** LED-illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct* Plated over front and blanked rear red Pyle-National 17540 “UDE” Gyralites Blanked class lights with gaskets on front and bolted plates on rear Printed number boards with separately controlled backlit LED-illumination* Directional LED headlights Front late SP/UP-style pilot plow with MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Front "tall" stepwells with see-through steps and rear “ladder” steps 88” low short hood with wheel handbrake Bolted battery box doors with wide louvers Late cab sub-base doors with lift-off hinges SP nose headlight package Dash-2 cab with welded side window panels, SP/SSW blue flag bracket, and modified “L” front window Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Cab front door with additional door lock at top of door Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Rectangular vent on left cab side, towards rear of cab Standard EMD sunshades and long sunshade tracks Vapor Corp. cab roof HVAC Lost-wax brass Nathan K3HA three-chime horn with shower caps on clearance bracket, relocated to long hood roof “Whip” radio antenna mounted on ground plane over dust bin Late electrical cabinet "zig-zag" seam, closer to rear of cab Welded ECAFB (late) Late inertial air intake grilles with top and bottom drip rail "Post 1980" extended-range dynamic brake with exhaust silencer Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets Straight rear uncoupling lever with four mounting brackets Handrail set with anticlimber front and rear end railing with outward facing mounting brackets, “breakaway” inner stanchions and chain Handrail ends and step faces painted white Front and rear 3-hose MU hose clusters with silver gladhands Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers Notched pilot faces with high mounted angled lifting slots Pilot-face mounted MU receptacle Front narrow “blunt” front anticlimber rear full-width front pilot anticlimber Scale sectioned treadplate detail on walkways Accurate hood door and long hood detail “Post-1980” exhaust silencer See-through dynamic brake intakes with resistor grid detail See-through standard 48” dynamic brake fan housings with fan blades visible inside Detailed see-through radiator intake compartment with front and rear bulkheads, floor treadplate, and fan motor detail Etched-metal radiator exhaust grills with radiator shutters visible underneath Separate radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, late center axle snubbers, sanding lines and brackets (outboard only), and D-77 traction motor and air duct details Dimensionally accurate truck centers Speed recorder first axle, left side Forward facing handbrake chain mount for Flexicoil trucks Four-hole SP jacking pads Spare knuckle holders on rear pilot along with spare knuckle boxes mounted to truck sideframes Sill-mounted EFCO Frame-mounted bell Double Graham-White (Prime) brand 975-075 (can style) Standard air tanks 4,400 gallon fuel tank with reinforced tank edges where sides meet the tank ends, dual fuel fillers, dual vertical gauges, round gauge on stand and vertical breather pipe Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DC/DCC & sound ready locomotives also feature: Operable using a DC power pack DCC ready with 21-pin connector

Neuerscheinung! Auslieferung April 2025

Vorbestellfrist für garantierte Lieferung: 24.06.2024

• DCC vorbereitet (Schnittstelle vorhanden)

New paint scheme Era: early 2000s to 2008 UP series mixed; ex-SP 8230 to 8299; built 3/80 to 7/80 Road number 8782; ex-SP 8230 UP “Patch” former Southern Pacific speed lettered repaint Fully-assembled No truck ground lights (prototype not equipped) LED-illuminated-illuminated front deck mounted ditch lights** LED-illuminated-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct* Plated over front and blanked rear red Pyle-National 17540 “UDE” Gyralites Blanked class lights with gaskets on front and bolted plates on rear Printed number boards with separately controlled backlit LED-illumination* Directional LED headlights Front late SP/UP-style pilot plow with MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Front "tall" stepwells with see-through steps and rear “ladder” steps 88” low short hood with wheel handbrake Bolted battery box doors with wide louvers Late cab sub-base doors with lift-off hinges Dash-2 cab with welded side window panels, SP/SSW blue flag bracket, and modified “L” front window Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Cab front door with additional door lock at top of door Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Rectangular vent on left cab side, towards rear of cab Standard EMD sunshades and long sunshade tracks Vapor Corp. cab roof HVAC Lost-wax brass Nathan K3HA three-chime horn on clearance bracket, relocated to long hood roof “Whip” radio antenna mounted on ground plane over dust bin Late electrical cabinet "zig-zag" seam, closer to rear of cab Welded ECAFB (late) Late inertial air intake grilles with top and bottom drip rail "Post 1980" extended-range dynamic brake with exhaust silencer Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets Straight rear uncoupling lever with four mounting brackets Handrail set with anticlimber front and rear end railing with outward facing mounting brackets, “breakaway” inner stanchions and chain Handrail ends and step faces painted white Front and rear 3-hose MU hose clusters with silver gladhands Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers Notched pilot faces with high mounted angled lifting slots Pilot-face mounted MU receptacle Front narrow “blunt” front anticlimber rear full-width front pilot anticlimber Scale sectioned treadplate detail on walkways Accurate hood door and long hood detail “Post-1980” exhaust silencer See-through dynamic brake intakes with resistor grid detail See-through standard 48” dynamic brake fan housings with fan blades visible inside Detailed see-through radiator intake compartment with front and rear bulkheads, floor treadplate, and fan motor detail Etched-metal radiator exhaust grills with radiator shutters visible underneath Separate radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, late center axle snubbers, sanding lines and brackets (outboard only), and D-77 traction motor and air duct details Dimensionally accurate truck centers Speed recorder first axle, left side Forward facing handbrake chain mount for Flexicoil trucks Four-hole SP jacking pads Spare knuckle holders on rear pilot face Additional spare knuckle box only on front left truck sideframe Sill-mounted EFCO Frame-mounted bell Double Graham-White (Prime) brand 975-075 (can style) Standard air tanks 4,400 gallon fuel tank with reinforced tank edges where sides meet the tank ends, dual fuel fillers, dual vertical gauges, round gauge on stand and vertical breather pipe Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DC/DCC & sound ready locomotives also feature: Operable using a DC power pack DCC ready with 21-pin connector

Neuerscheinung! Auslieferung April 2025

Vorbestellfrist für garantierte Lieferung: 24.06.2024

• mit DCC Motordekoder
• mit Sound

New paint scheme Era: early 2000s to 2008 UP series mixed; ex-SP 8230 to 8299; built 3/80 to 7/80 Road number 8782; ex-SP 8230 UP “Patch” former Southern Pacific speed lettered repaint Fully-assembled No truck ground lights (prototype not equipped) LED-illuminated-illuminated front deck mounted ditch lights** LED-illuminated-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct* Plated over front and blanked rear red Pyle-National 17540 “UDE” Gyralites Blanked class lights with gaskets on front and bolted plates on rear Printed number boards with separately controlled backlit LED-illumination* Directional LED headlights Front late SP/UP-style pilot plow with MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Front "tall" stepwells with see-through steps and rear “ladder” steps 88” low short hood with wheel handbrake Bolted battery box doors with wide louvers Late cab sub-base doors with lift-off hinges Dash-2 cab with welded side window panels, SP/SSW blue flag bracket, and modified “L” front window Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Cab front door with additional door lock at top of door Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Rectangular vent on left cab side, towards rear of cab Standard EMD sunshades and long sunshade tracks Vapor Corp. cab roof HVAC Lost-wax brass Nathan K3HA three-chime horn on clearance bracket, relocated to long hood roof “Whip” radio antenna mounted on ground plane over dust bin Late electrical cabinet "zig-zag" seam, closer to rear of cab Welded ECAFB (late) Late inertial air intake grilles with top and bottom drip rail "Post 1980" extended-range dynamic brake with exhaust silencer Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets Straight rear uncoupling lever with four mounting brackets Handrail set with anticlimber front and rear end railing with outward facing mounting brackets, “breakaway” inner stanchions and chain Handrail ends and step faces painted white Front and rear 3-hose MU hose clusters with silver gladhands Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers Notched pilot faces with high mounted angled lifting slots Pilot-face mounted MU receptacle Front narrow “blunt” front anticlimber rear full-width front pilot anticlimber Scale sectioned treadplate detail on walkways Accurate hood door and long hood detail “Post-1980” exhaust silencer See-through dynamic brake intakes with resistor grid detail See-through standard 48” dynamic brake fan housings with fan blades visible inside Detailed see-through radiator intake compartment with front and rear bulkheads, floor treadplate, and fan motor detail Etched-metal radiator exhaust grills with radiator shutters visible underneath Separate radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, late center axle snubbers, sanding lines and brackets (outboard only), and D-77 traction motor and air duct details Dimensionally accurate truck centers Speed recorder first axle, left side Forward facing handbrake chain mount for Flexicoil trucks Four-hole SP jacking pads Spare knuckle holders on rear pilot face Additional spare knuckle box only on front left truck sideframe Sill-mounted EFCO Frame-mounted bell Double Graham-White (Prime) brand 975-075 (can style) Standard air tanks 4,400 gallon fuel tank with reinforced tank edges where sides meet the tank ends, dual fuel fillers, dual vertical gauges, round gauge on stand and vertical breather pipe Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Dual cube-type speakers EMD 16 Cylinder 645E3 prime mover ESU designed “PowerPack” with two super capacitors**** Operates on both DC and DCC layouts

Neuerscheinung! Auslieferung April 2025

Vorbestellfrist für garantierte Lieferung: 24.06.2024

• mit DCC Motordekoder
• mit Sound

New paint scheme Era: early 2000s to 2008 UP series mixed; ex-SP 8499 to 8573; built 11/78 to 3/79 Road number 8715; ex-SP 8514 UP “Patch” former Southern Pacific ‘railroad roman’ lettered unit Fully-assembled No truck ground lights (prototype not equipped) Operating LED-illuminated front deck mounted ditch lights** Operating LED-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct* Removed and blanked front and rear red Pyle-National 17540 “UDE” Gyralites Blanked class lights with gaskets on front and bolted plates on rear Printed number boards with separately controlled backlit LED-illumination* Directional LED headlights Front late SP/UP-style pilot plow with MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Front "tall" stepwells with see-through steps and rear “ladder” steps 88” low short hood with wheel handbrake Bolted battery box doors with wide louvers Late cab sub-base doors with lift-off hinges SP nose headlight package Dash-2 cab with bolted side window panels, SP/SSW blue flag bracket, and modified “L” front window Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Cab front door with additional door lock at top of door Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Rectangular vent on left cab side, towards rear of cab Standard EMD sunshades and long sunshade tracks Vapor Corp. cab roof HVAC Lost-wax brass Nathan AirChime P24R1 (“P-3”) three-chime horn on clearance bracket; offset to engineer’s side and mounted on number board housing “Whip” radio antenna mounted on ground plane over dust bin Early electrical cabinet "zig-zag" seam, further from rear of cab Welded ECAFB (late) Intermediate inertial air intake grills with top drip rail Extended-range dynamic brake Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets Straight rear uncoupling lever with four mounting brackets Handrail set with anticlimber front and rear end railing with outward facing mounting brackets, “breakaway” inner stanchions and chain Handrail ends and step faces painted white Front and rear 3-hose MU hose clusters with silver gladhands Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers Notched pilot faces with high mounted angled lifting slots Pilot-face mounted MU receptacle Front narrow “blunt” front anticlimber rear full-width front pilot anticlimber Scale sectioned treadplate detail on walkways Accurate hood door and long hood detail Standard turbo exhaust stack See-through dynamic brake intakes with resistor grid detail See-through standard 48” dynamic brake fan housings with fan blades visible inside Replacement ‘pan type’ fan top on second dynamic brake fan Detailed see-through radiator intake compartment with front and rear bulkheads, floor treadplate, and fan motor detail Etched-metal radiator exhaust grills with radiator shutters visible underneath Separate radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, late center axle snubbers, sanding lines and brackets (outboard only), and D-77 traction motor and air duct details Dimensionally accurate truck centers Speed recorder first axle, left side Forward facing handbrake chain mount for Flexicoil trucks Four-hole SP jacking pads Spare knuckle holders on rear pilot face Sill-mounted EFCO Frame-mounted bell Single Graham-White (Prime) brand 975-075 (can style) Standard air tanks 4,400 gallon fuel tank with reinforced tank edges where sides meet the tank ends, dual fuel fillers, dual vertical gauges, round gauge on stand and vertical breather pipe Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Dual cube-type speakers EMD 16 Cylinder 645E3 prime mover ESU designed “PowerPack” with two super capacitors**** Operates on both DC and DCC layouts

Neuerscheinung! Auslieferung April 2025

Vorbestellfrist für garantierte Lieferung: 24.06.2024

• DCC vorbereitet (Schnittstelle vorhanden)

New paint scheme Era: early 2000s to 2008 UP series mixed; ex-SP 8499 to 8573; built 11/78 to 3/79 Road number 8715; ex-SP 8514 UP “Patch” former Southern Pacific ‘railroad roman’ lettered unit Fully-assembled No truck ground lights (prototype not equipped) Operating LED-illuminated front deck mounted ditch lights** Operating LED-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct* Removed and blanked front and rear red Pyle-National 17540 “UDE” Gyralites Blanked class lights with gaskets on front and bolted plates on rear Printed number boards with separately controlled backlit LED-illumination* Directional LED headlights Front late SP/UP-style pilot plow with MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Front "tall" stepwells with see-through steps and rear “ladder” steps 88” low short hood with wheel handbrake Bolted battery box doors with wide louvers Late cab sub-base doors with lift-off hinges SP nose headlight package Dash-2 cab with bolted side window panels, SP/SSW blue flag bracket, and modified “L” front window Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Cab front door with additional door lock at top of door Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Rectangular vent on left cab side, towards rear of cab Standard EMD sunshades and long sunshade tracks Vapor Corp. cab roof HVAC Lost-wax brass Nathan AirChime P24R1 (“P-3”) three-chime horn on clearance bracket; offset to engineer’s side and mounted on number board housing “Whip” radio antenna mounted on ground plane over dust bin Early electrical cabinet "zig-zag" seam, further from rear of cab Welded ECAFB (late) Intermediate inertial air intake grills with top drip rail Extended-range dynamic brake Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets Straight rear uncoupling lever with four mounting brackets Handrail set with anticlimber front and rear end railing with outward facing mounting brackets, “breakaway” inner stanchions and chain Handrail ends and step faces painted white Front and rear 3-hose MU hose clusters with silver gladhands Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers Notched pilot faces with high mounted angled lifting slots Pilot-face mounted MU receptacle Front narrow “blunt” front anticlimber rear full-width front pilot anticlimber Scale sectioned treadplate detail on walkways Accurate hood door and long hood detail Standard turbo exhaust stack See-through dynamic brake intakes with resistor grid detail See-through standard 48” dynamic brake fan housings with fan blades visible inside Replacement ‘pan type’ fan top on second dynamic brake fan Detailed see-through radiator intake compartment with front and rear bulkheads, floor treadplate, and fan motor detail Etched-metal radiator exhaust grills with radiator shutters visible underneath Separate radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, late center axle snubbers, sanding lines and brackets (outboard only), and D-77 traction motor and air duct details Dimensionally accurate truck centers Speed recorder first axle, left side Forward facing handbrake chain mount for Flexicoil trucks Four-hole SP jacking pads Spare knuckle holders on rear pilot face Sill-mounted EFCO Frame-mounted bell Single Graham-White (Prime) brand 975-075 (can style) Standard air tanks 4,400 gallon fuel tank with reinforced tank edges where sides meet the tank ends, dual fuel fillers, dual vertical gauges, round gauge on stand and vertical breather pipe Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DC/DCC & sound ready locomotives also feature: Operable using a DC power pack DCC ready with 21-pin connector