Sie sind hier:
Neuerscheinung! Auslieferung Februar 2025
Vorbestellfrist für garantierte Lieferung: 24.06.2024
New road numbers Era: 1986 to mid 1990s Rio Grande series 5386 to 5397, built 8:1978 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct* LED-illuminated box-mounted Pyle-National 20585 Gyralite signal light in low short hood* LED-illuminated front and rear stand-off tri-color class lights** Printed number boards with separately controlled backlit LED-illumination* Directional LED headlights “McCarty” type re-rail frogs Front EMD-style low pilot plow without MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Front late small deck extension Late front drop step (“fixed”) Front "tall" stepwells with see-through steps and rear “ladder” steps 88” low short hood with wheel handbrake Bolted battery box doors with wide louvers Late cab sub-base doors with lift-off hinges Standard EMD headlight in numberboard housing Dash-2 cab with bolted side window panels and D&RGW blue flag bracket Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Original cab front door Sliding cab side windows Standard Mirror mounted fore of cab side windows, both sides Rear cab side vent on left side Standard EMD sunshades and long sunshade tracks Lost-wax brass Nathan AirChime P24R1 (“P-3”) three-chime horn, center rear of number board housing Large Sinclair Excalibur “ice skate” antenna (communications) and small wedge antenna mounted on cab roof Early electrical cabinet "zig-zag" seam, further from rear of cab Welded ECAFB (late) Intermediate inertial air intake grills with top drip rail Extended-range dynamic brake Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets Straight rear uncoupling lever with four mounting brackets Handrail set with inward facing end rail mounting brackets and chain; break-away stanchions on both ends Handrail ends and step faces painted white Front and rear 3-hose MU hose clusters with silver gladhands Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers Notched pilot faces with high mounted angled lifting slots Pilot-face mounted MU receptacle "Tall" stepwells with see-through steps Front late small deck extension rear full-width front pilot anticlimber Scale sectioned treadplate detail on walkways Accurate hood door and long hood detail Standard turbo exhaust stack See-through dynamic brake intakes with resistor grid detail See-through standard 48” dynamic brake fan housings with fan blades visible inside Detailed see-through radiator intake compartment with front and rear bulkheads, floor treadplate, and fan motor detail Etched-metal radiator exhaust grills with radiator shutters visible underneath Separate radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, early center axle snubbers, sanding lines and brackets (outboard only), and D-77 traction motor and air duct details Retrofitted PTC wheel slip pickups on left side axles 1-3, and right side axles 4-6 Dimensionally accurate truck centers Speed recorder third axle, right side Forward facing handbrake chain mount for Flexicoil trucks Tall jacking pads without holes (intermediate) Sill-mounted EFCO Frame-mounted bell Graham-White (Salem) brand 824-170 and 818-170 primary and secondary centrifugal air filters (accordion-style) Air tanks with fluid drain pipes on sides of fuel tank 4,400 gallon fuel tank with reinforced tank edges where sides meet the tank ends, dual fuel fillers, dual vertical gauges, round gauge on stand and vertical breather pipe Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Dual cube-type speakers EMD 16 Cylinder 645E3 prime mover ESU designed “PowerPack” with two super capacitors**** Operates on both DC and DCC layouts
Produktgewicht inkl. Verpackung: 1,320 kgNeuerscheinung! Auslieferung Februar 2025
Vorbestellfrist für garantierte Lieferung: 24.06.2024
New road numbers Era: 1986 to mid 1990s Rio Grande series 5386 to 5397, built 8:1978 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct* LED-illuminated box-mounted Pyle-National 20585 Gyralite signal light in low short hood* LED-illuminated front and rear stand-off tri-color class lights** Printed number boards with separately controlled backlit LED-illumination* Directional LED headlights “McCarty” type re-rail frogs Front EMD-style low pilot plow without MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Front late small deck extension Late front drop step (“fixed”) Front "tall" stepwells with see-through steps and rear “ladder” steps 88” low short hood with wheel handbrake Bolted battery box doors with wide louvers Late cab sub-base doors with lift-off hinges Standard EMD headlight in numberboard housing Dash-2 cab with bolted side window panels and D&RGW blue flag bracket Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Original cab front door Sliding cab side windows Standard Mirror mounted fore of cab side windows, both sides Rear cab side vent on left side Standard EMD sunshades and long sunshade tracks Lost-wax brass Nathan AirChime P24R1 (“P-3”) three-chime horn, center rear of number board housing Large Sinclair Excalibur “ice skate” antenna (communications) and small wedge antenna mounted on cab roof Early electrical cabinet "zig-zag" seam, further from rear of cab Welded ECAFB (late) Intermediate inertial air intake grills with top drip rail Extended-range dynamic brake Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets Straight rear uncoupling lever with four mounting brackets Handrail set with inward facing end rail mounting brackets and chain; break-away stanchions on both ends Handrail ends and step faces painted white Front and rear 3-hose MU hose clusters with silver gladhands Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers Notched pilot faces with high mounted angled lifting slots Pilot-face mounted MU receptacle "Tall" stepwells with see-through steps Front late small deck extension rear full-width front pilot anticlimber Scale sectioned treadplate detail on walkways Accurate hood door and long hood detail Standard turbo exhaust stack See-through dynamic brake intakes with resistor grid detail See-through standard 48” dynamic brake fan housings with fan blades visible inside Detailed see-through radiator intake compartment with front and rear bulkheads, floor treadplate, and fan motor detail Etched-metal radiator exhaust grills with radiator shutters visible underneath Separate radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, early center axle snubbers, sanding lines and brackets (outboard only), and D-77 traction motor and air duct details Retrofitted PTC wheel slip pickups on left side axles 1-3, and right side axles 4-6 Dimensionally accurate truck centers Speed recorder third axle, right side Forward facing handbrake chain mount for Flexicoil trucks Tall jacking pads without holes (intermediate) Sill-mounted EFCO Frame-mounted bell Graham-White (Salem) brand 824-170 and 818-170 primary and secondary centrifugal air filters (accordion-style) Air tanks with fluid drain pipes on sides of fuel tank 4,400 gallon fuel tank with reinforced tank edges where sides meet the tank ends, dual fuel fillers, dual vertical gauges, round gauge on stand and vertical breather pipe Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DC/DCC & sound ready locomotives also feature: Operable using a DC power pack DCC ready with 21-pin connector
Produktgewicht inkl. Verpackung: 1,320 kgNeuerscheinung! Auslieferung Februar 2025
Vorbestellfrist für garantierte Lieferung: 24.06.2024
New road numbers Era: 1986 to mid 1990s Rio Grande series 5386 to 5397, built 8:1978 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct* LED-illuminated box-mounted Pyle-National 20585 Gyralite signal light in low short hood* LED-illuminated front and rear stand-off tri-color class lights** Printed number boards with separately controlled backlit LED-illumination* Directional LED headlights “McCarty” type re-rail frogs Front EMD-style low pilot plow without MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Front late small deck extension Late front drop step (“fixed”) Front "tall" stepwells with see-through steps and rear “ladder” steps 88” low short hood with wheel handbrake Bolted battery box doors with wide louvers Late cab sub-base doors with lift-off hinges Standard EMD headlight in numberboard housing Dash-2 cab with bolted side window panels and D&RGW blue flag bracket Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Original cab front door Sliding cab side windows Standard Mirror mounted fore of cab side windows, both sides Rear cab side vent on left side Standard EMD sunshades and long sunshade tracks Lost-wax brass Nathan AirChime P24R1 (“P-3”) three-chime horn, center rear of number board housing Large Sinclair Excalibur “ice skate” antenna (communications) and small wedge antenna mounted on cab roof Early electrical cabinet "zig-zag" seam, further from rear of cab Welded ECAFB (late) Intermediate inertial air intake grills with top drip rail Extended-range dynamic brake Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets Straight rear uncoupling lever with four mounting brackets Handrail set with inward facing end rail mounting brackets and chain; break-away stanchions on both ends Handrail ends and step faces painted white Front and rear 3-hose MU hose clusters with silver gladhands Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers Notched pilot faces with high mounted angled lifting slots Pilot-face mounted MU receptacle "Tall" stepwells with see-through steps Front late small deck extension rear full-width front pilot anticlimber Scale sectioned treadplate detail on walkways Accurate hood door and long hood detail Standard turbo exhaust stack See-through dynamic brake intakes with resistor grid detail See-through standard 48” dynamic brake fan housings with fan blades visible inside Detailed see-through radiator intake compartment with front and rear bulkheads, floor treadplate, and fan motor detail Etched-metal radiator exhaust grills with radiator shutters visible underneath Separate radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, early center axle snubbers, sanding lines and brackets (outboard only), and D-77 traction motor and air duct details Retrofitted PTC wheel slip pickups on left side axles 1-3, and right side axles 4-6 Dimensionally accurate truck centers Speed recorder third axle, right side Forward facing handbrake chain mount for Flexicoil trucks Tall jacking pads without holes (intermediate) Sill-mounted EFCO Frame-mounted bell Graham-White (Salem) brand 824-170 and 818-170 primary and secondary centrifugal air filters (accordion-style) Air tanks with fluid drain pipes on sides of fuel tank 4,400 gallon fuel tank with reinforced tank edges where sides meet the tank ends, dual fuel fillers, dual vertical gauges, round gauge on stand and vertical breather pipe Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Dual cube-type speakers EMD 16 Cylinder 645E3 prime mover ESU designed “PowerPack” with two super capacitors**** Operates on both DC and DCC layouts
Produktgewicht inkl. Verpackung: 1,320 kgNeuerscheinung! Auslieferung Februar 2025
Vorbestellfrist für garantierte Lieferung: 24.06.2024
New road numbers Era: 1986 to mid 1990s Rio Grande series 5386 to 5397, built 8:1978 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct* LED-illuminated box-mounted Pyle-National 20585 Gyralite signal light in low short hood* LED-illuminated front and rear stand-off tri-color class lights** Printed number boards with separately controlled backlit LED-illumination* Directional LED headlights “McCarty” type re-rail frogs Front EMD-style low pilot plow without MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Front late small deck extension Late front drop step (“fixed”) Front "tall" stepwells with see-through steps and rear “ladder” steps 88” low short hood with wheel handbrake Bolted battery box doors with wide louvers Late cab sub-base doors with lift-off hinges Standard EMD headlight in numberboard housing Dash-2 cab with bolted side window panels and D&RGW blue flag bracket Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Original cab front door Sliding cab side windows Standard Mirror mounted fore of cab side windows, both sides Rear cab side vent on left side Standard EMD sunshades and long sunshade tracks Lost-wax brass Nathan AirChime P24R1 (“P-3”) three-chime horn, center rear of number board housing Large Sinclair Excalibur “ice skate” antenna (communications) and small wedge antenna mounted on cab roof Early electrical cabinet "zig-zag" seam, further from rear of cab Welded ECAFB (late) Intermediate inertial air intake grills with top drip rail Extended-range dynamic brake Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets Straight rear uncoupling lever with four mounting brackets Handrail set with inward facing end rail mounting brackets and chain; break-away stanchions on both ends Handrail ends and step faces painted white Front and rear 3-hose MU hose clusters with silver gladhands Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers Notched pilot faces with high mounted angled lifting slots Pilot-face mounted MU receptacle "Tall" stepwells with see-through steps Front late small deck extension rear full-width front pilot anticlimber Scale sectioned treadplate detail on walkways Accurate hood door and long hood detail Standard turbo exhaust stack See-through dynamic brake intakes with resistor grid detail See-through standard 48” dynamic brake fan housings with fan blades visible inside Detailed see-through radiator intake compartment with front and rear bulkheads, floor treadplate, and fan motor detail Etched-metal radiator exhaust grills with radiator shutters visible underneath Separate radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, early center axle snubbers, sanding lines and brackets (outboard only), and D-77 traction motor and air duct details Retrofitted PTC wheel slip pickups on left side axles 1-3, and right side axles 4-6 Dimensionally accurate truck centers Speed recorder third axle, right side Forward facing handbrake chain mount for Flexicoil trucks Tall jacking pads without holes (intermediate) Sill-mounted EFCO Frame-mounted bell Graham-White (Salem) brand 824-170 and 818-170 primary and secondary centrifugal air filters (accordion-style) Air tanks with fluid drain pipes on sides of fuel tank 4,400 gallon fuel tank with reinforced tank edges where sides meet the tank ends, dual fuel fillers, dual vertical gauges, round gauge on stand and vertical breather pipe Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DC/DCC & sound ready locomotives also feature: Operable using a DC power pack DCC ready with 21-pin connector
Produktgewicht inkl. Verpackung: 1,320 kgNeuerscheinung! Auslieferung Februar 2025
Vorbestellfrist für garantierte Lieferung: 24.06.2024
New road numbers Era: 1986 to mid 1990s Rio Grande series 5386 to 5397, built 8:1978 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct* LED-illuminated box-mounted Pyle-National 20585 Gyralite signal light in low short hood* LED-illuminated front and rear stand-off tri-color class lights** Printed number boards with separately controlled backlit LED-illumination* Directional LED headlights “McCarty” type re-rail frogs Front EMD-style low pilot plow without MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Front late small deck extension Late front drop step (“fixed”) Front "tall" stepwells with see-through steps and rear “ladder” steps 88” low short hood with wheel handbrake Bolted battery box doors with wide louvers Late cab sub-base doors with lift-off hinges Standard EMD headlight in numberboard housing Dash-2 cab with bolted side window panels and D&RGW blue flag bracket Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Original cab front door Sliding cab side windows Standard Mirror mounted fore of cab side windows, both sides Rear cab side vent on left side Standard EMD sunshades and long sunshade tracks Lost-wax brass Nathan AirChime P24R1 (“P-3”) three-chime horn, center rear of number board housing Large Sinclair Excalibur “ice skate” antenna (communications) and small wedge antenna mounted on cab roof Early electrical cabinet "zig-zag" seam, further from rear of cab Welded ECAFB (late) Intermediate inertial air intake grills with top drip rail Extended-range dynamic brake Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets Straight rear uncoupling lever with four mounting brackets Handrail set with inward facing end rail mounting brackets and chain; break-away stanchions on both ends Handrail ends and step faces painted white Front and rear 3-hose MU hose clusters with silver gladhands Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers Notched pilot faces with high mounted angled lifting slots Pilot-face mounted MU receptacle "Tall" stepwells with see-through steps Front late small deck extension rear full-width front pilot anticlimber Scale sectioned treadplate detail on walkways Accurate hood door and long hood detail Standard turbo exhaust stack See-through dynamic brake intakes with resistor grid detail See-through standard 48” dynamic brake fan housings with fan blades visible inside Detailed see-through radiator intake compartment with front and rear bulkheads, floor treadplate, and fan motor detail Etched-metal radiator exhaust grills with radiator shutters visible underneath Separate radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, early center axle snubbers, sanding lines and brackets (outboard only), and D-77 traction motor and air duct details Retrofitted PTC wheel slip pickups on left side axles 1-3, and right side axles 4-6 Dimensionally accurate truck centers Speed recorder third axle, right side Forward facing handbrake chain mount for Flexicoil trucks Tall jacking pads without holes (intermediate) Sill-mounted EFCO Frame-mounted bell Graham-White (Salem) brand 824-170 and 818-170 primary and secondary centrifugal air filters (accordion-style) Air tanks with fluid drain pipes on sides of fuel tank 4,400 gallon fuel tank with reinforced tank edges where sides meet the tank ends, dual fuel fillers, dual vertical gauges, round gauge on stand and vertical breather pipe Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Dual cube-type speakers EMD 16 Cylinder 645E3 prime mover ESU designed “PowerPack” with two super capacitors**** Operates on both DC and DCC layouts
Produktgewicht inkl. Verpackung: 1,320 kgNeuerscheinung! Auslieferung Februar 2025
Vorbestellfrist für garantierte Lieferung: 24.06.2024
New road numbers Era: 1986 to mid 1990s Rio Grande series 5386 to 5397, built 8:1978 Fully-assembled Multiple road numbers LED-illuminated ground lights on both sides of locomotive* LED-illuminated-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct* LED-illuminated box-mounted Pyle-National 20585 Gyralite signal light in low short hood* LED-illuminated front and rear stand-off tri-color class lights** Printed number boards with separately controlled backlit LED-illumination* Directional LED headlights “McCarty” type re-rail frogs Front EMD-style low pilot plow without MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Front late small deck extension Late front drop step (“fixed”) Front "tall" stepwells with see-through steps and rear “ladder” steps 88” low short hood with wheel handbrake Bolted battery box doors with wide louvers Late cab sub-base doors with lift-off hinges Standard EMD headlight in numberboard housing Dash-2 cab with bolted side window panels and D&RGW blue flag bracket Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Original cab front door Sliding cab side windows Standard Mirror mounted fore of cab side windows, both sides Rear cab side vent on left side Standard EMD sunshades and long sunshade tracks Lost-wax brass Nathan AirChime P24R1 (“P-3”) three-chime horn, center rear of number board housing Large Sinclair Excalibur “ice skate” antenna (communications) and small wedge antenna mounted on cab roof Early electrical cabinet "zig-zag" seam, further from rear of cab Welded ECAFB (late) Intermediate inertial air intake grills with top drip rail Extended-range dynamic brake Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets Straight rear uncoupling lever with four mounting brackets Handrail set with inward facing end rail mounting brackets and chain; break-away stanchions on both ends Handrail ends and step faces painted white Front and rear 3-hose MU hose clusters with silver gladhands Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers Notched pilot faces with high mounted angled lifting slots Pilot-face mounted MU receptacle "Tall" stepwells with see-through steps Front late small deck extension rear full-width front pilot anticlimber Scale sectioned treadplate detail on walkways Accurate hood door and long hood detail Standard turbo exhaust stack See-through dynamic brake intakes with resistor grid detail See-through standard 48” dynamic brake fan housings with fan blades visible inside Detailed see-through radiator intake compartment with front and rear bulkheads, floor treadplate, and fan motor detail Etched-metal radiator exhaust grills with radiator shutters visible underneath Separate radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, early center axle snubbers, sanding lines and brackets (outboard only), and D-77 traction motor and air duct details Retrofitted PTC wheel slip pickups on left side axles 1-3, and right side axles 4-6 Dimensionally accurate truck centers Speed recorder third axle, right side Forward facing handbrake chain mount for Flexicoil trucks Tall jacking pads without holes (intermediate) Sill-mounted EFCO Frame-mounted bell Graham-White (Salem) brand 824-170 and 818-170 primary and secondary centrifugal air filters (accordion-style) Air tanks with fluid drain pipes on sides of fuel tank 4,400 gallon fuel tank with reinforced tank edges where sides meet the tank ends, dual fuel fillers, dual vertical gauges, round gauge on stand and vertical breather pipe Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DC/DCC & sound ready locomotives also feature: Operable using a DC power pack DCC ready with 21-pin connector
Produktgewicht inkl. Verpackung: 1,320 kgNeuerscheinung! Auslieferung Februar 2025
Vorbestellfrist für garantierte Lieferung: 24.06.2024
New paint scheme Era: early 2000s to 2008 UP series mixed; ex-SP 5356 to 5373; nee-DRGW 5356 to 5373; built 7/75 to 8/75 Road number 8625; ex-SP/DRGW 5368 UP “Patch” former Southern Pacific/DRGW speed lettered repaint Fully-assembled LED-illuminated ground lights on both sides of locomotive* LED-illuminated-illuminated front deck mounted ditch lights** LED-illuminated-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct* Plated over Mars SBW-2-301 signal light in low short hood Blanked class lights with bolted plates front and rear Printed number boards with separately controlled backlit LED-illumination* Directional LED headlights Front EMD-style low pilot plow with MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Front early small deck extension Early front drop step (pivoting) Front "tall" stepwells with see-through steps and rear “ladder” steps 81” low short hood with ratchet handbrake and straight chain guard Bolted battery box doors with narrow louvers Early cab sub-base doors with early hinges Standard EMD headlight in numberboard housing Dash-2 cab with bolted side window panels and D&RGW blue flag bracket Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Original cab front door Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Rectangular vent on right cab side, towards rear of cab Standard EMD sunshades and long sunshade tracks Lost-wax brass Nathan AirChime P24R1 (“P-3”) three-chime horn on clearance bracket, relocated to long hood roof Large Sinclair Excalibur “ice skate” antenna (communications) and small wedge antenna mounted on cab roof Early electrical cabinet "zig-zag" seam, further from rear of cab Stand-off ECAFB (early) Intermediate inertial air intake grills with top drip rail Extended-range dynamic brake Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets Straight rear uncoupling lever with four mounting brackets Handrail set with outward facing end rail mounting brackets, rear anticlimber and chain Handrail ends and step faces painted white Front and rear 3-hose MU hose clusters with silver gladhands Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers Notched pilot faces with low mounted angled lifting slots Deck-mounted MU receptacle Front early small deck extension rear full-width front pilot anticlimber Scale sectioned treadplate detail on walkways Accurate hood door and long hood detail Standard turbo exhaust stack See-through dynamic brake intakes with resistor grid detail See-through standard 48” dynamic brake fan housings with fan blades visible inside Detailed see-through radiator intake compartment with front and rear bulkheads, floor treadplate, and fan motor detail Etched-metal radiator exhaust grills with radiator shutters visible underneath Separate radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, early center axle snubbers, sanding lines and brackets (outboard only), and D-77 traction motor and air duct details Retrofitted PTC wheel slip pickups on left side axles 1-3, and right side axles 4-6 Dimensionally accurate truck centers Speed recorder third axle, right side Forward facing handbrake chain mount for Flexicoil trucks Tall jacking pads with holes (early) Spare knuckle boxes mounted to truck sideframes and spare knuckle holders on rear pilot face Sill-mounted EFCO Frame-mounted bell Graham-White (Salem) brand 824-170 and 818-170 primary and secondary centrifugal air filters (accordion-style) Air tanks with fluid drain pipes on sides of fuel tank 4,000 gallon fuel tank with dual fuel fillers, vertical gauge, round gauge in tank and vertical breather pipe ACI label plates mounted on plates attached to handrail stanchions and painted over Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Dual cube-type speakers EMD 16 Cylinder 645E3 prime mover ESU designed “PowerPack” with two super capacitors**** Operates on both DC and DCC layouts
Produktgewicht inkl. Verpackung: 1,320 kgNeuerscheinung! Auslieferung Februar 2025
Vorbestellfrist für garantierte Lieferung: 24.06.2024
New paint scheme Era: early 2000s to 2008 UP series mixed; ex-SP 5356 to 5373; nee-DRGW 5356 to 5373; built 7/75 to 8/75 Road number 8625; ex-SP/DRGW 5368 UP “Patch” former Southern Pacific/DRGW speed lettered repaint Fully-assembled LED-illuminated ground lights on both sides of locomotive* LED-illuminated-illuminated front deck mounted ditch lights** LED-illuminated-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct* Plated over Mars SBW-2-301 signal light in low short hood Blanked class lights with bolted plates front and rear Printed number boards with separately controlled backlit LED-illumination* Directional LED headlights Front EMD-style low pilot plow with MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Front early small deck extension Early front drop step (pivoting) Front "tall" stepwells with see-through steps and rear “ladder” steps 81” low short hood with ratchet handbrake and straight chain guard Bolted battery box doors with narrow louvers Early cab sub-base doors with early hinges Standard EMD headlight in numberboard housing Dash-2 cab with bolted side window panels and D&RGW blue flag bracket Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Original cab front door Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Rectangular vent on right cab side, towards rear of cab Standard EMD sunshades and long sunshade tracks Lost-wax brass Nathan AirChime P24R1 (“P-3”) three-chime horn on clearance bracket, relocated to long hood roof Large Sinclair Excalibur “ice skate” antenna (communications) and small wedge antenna mounted on cab roof Early electrical cabinet "zig-zag" seam, further from rear of cab Stand-off ECAFB (early) Intermediate inertial air intake grills with top drip rail Extended-range dynamic brake Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets Straight rear uncoupling lever with four mounting brackets Handrail set with outward facing end rail mounting brackets, rear anticlimber and chain Handrail ends and step faces painted white Front and rear 3-hose MU hose clusters with silver gladhands Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers Notched pilot faces with low mounted angled lifting slots Deck-mounted MU receptacle Front early small deck extension rear full-width front pilot anticlimber Scale sectioned treadplate detail on walkways Accurate hood door and long hood detail Standard turbo exhaust stack See-through dynamic brake intakes with resistor grid detail See-through standard 48” dynamic brake fan housings with fan blades visible inside Detailed see-through radiator intake compartment with front and rear bulkheads, floor treadplate, and fan motor detail Etched-metal radiator exhaust grills with radiator shutters visible underneath Separate radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, early center axle snubbers, sanding lines and brackets (outboard only), and D-77 traction motor and air duct details Retrofitted PTC wheel slip pickups on left side axles 1-3, and right side axles 4-6 Dimensionally accurate truck centers Speed recorder third axle, right side Forward facing handbrake chain mount for Flexicoil trucks Tall jacking pads with holes (early) Spare knuckle boxes mounted to truck sideframes and spare knuckle holders on rear pilot face Sill-mounted EFCO Frame-mounted bell Graham-White (Salem) brand 824-170 and 818-170 primary and secondary centrifugal air filters (accordion-style) Air tanks with fluid drain pipes on sides of fuel tank 4,000 gallon fuel tank with dual fuel fillers, vertical gauge, round gauge in tank and vertical breather pipe ACI label plates mounted on plates attached to handrail stanchions and painted over Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DC/DCC & sound ready locomotives also feature: Operable using a DC power pack DCC ready with 21-pin connector
Produktgewicht inkl. Verpackung: 1,320 kgNeuerscheinung! Auslieferung Februar 2025
Vorbestellfrist für garantierte Lieferung: 24.06.2024
New paint scheme Era: early 2000s to 2008 UP series mixed; ex-SP 8499 to 8573; built 11/78 to 3/79 Road number 8715; ex-SP 8514 UP “Patch” former Southern Pacific ‘railroad roman’ lettered unit Fully-assembled No truck ground lights (prototype not equipped) Operating LED-illuminated front deck mounted ditch lights** Operating LED-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct* Removed and blanked front and rear red Pyle-National 17540 “UDE” Gyralites Blanked class lights with gaskets on front and bolted plates on rear Printed number boards with separately controlled backlit LED-illumination* Directional LED headlights Front late SP/UP-style pilot plow with MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Front "tall" stepwells with see-through steps and rear “ladder” steps 88” low short hood with wheel handbrake Bolted battery box doors with wide louvers Late cab sub-base doors with lift-off hinges SP nose headlight package Dash-2 cab with bolted side window panels, SP/SSW blue flag bracket, and modified “L” front window Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Cab front door with additional door lock at top of door Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Rectangular vent on left cab side, towards rear of cab Standard EMD sunshades and long sunshade tracks Vapor Corp. cab roof HVAC Lost-wax brass Nathan AirChime P24R1 (“P-3”) three-chime horn on clearance bracket; offset to engineer’s side and mounted on number board housing “Whip” radio antenna mounted on ground plane over dust bin Early electrical cabinet "zig-zag" seam, further from rear of cab Welded ECAFB (late) Intermediate inertial air intake grills with top drip rail Extended-range dynamic brake Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets Straight rear uncoupling lever with four mounting brackets Handrail set with anticlimber front and rear end railing with outward facing mounting brackets, “breakaway” inner stanchions and chain Handrail ends and step faces painted white Front and rear 3-hose MU hose clusters with silver gladhands Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers Notched pilot faces with high mounted angled lifting slots Pilot-face mounted MU receptacle Front narrow “blunt” front anticlimber rear full-width front pilot anticlimber Scale sectioned treadplate detail on walkways Accurate hood door and long hood detail Standard turbo exhaust stack See-through dynamic brake intakes with resistor grid detail See-through standard 48” dynamic brake fan housings with fan blades visible inside Replacement ‘pan type’ fan top on second dynamic brake fan Detailed see-through radiator intake compartment with front and rear bulkheads, floor treadplate, and fan motor detail Etched-metal radiator exhaust grills with radiator shutters visible underneath Separate radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, late center axle snubbers, sanding lines and brackets (outboard only), and D-77 traction motor and air duct details Dimensionally accurate truck centers Speed recorder first axle, left side Forward facing handbrake chain mount for Flexicoil trucks Four-hole SP jacking pads Spare knuckle holders on rear pilot face Sill-mounted EFCO Frame-mounted bell Single Graham-White (Prime) brand 975-075 (can style) Standard air tanks 4,400 gallon fuel tank with reinforced tank edges where sides meet the tank ends, dual fuel fillers, dual vertical gauges, round gauge on stand and vertical breather pipe Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Dual cube-type speakers EMD 16 Cylinder 645E3 prime mover ESU designed “PowerPack” with two super capacitors**** Operates on both DC and DCC layouts
Produktgewicht inkl. Verpackung: 1,320 kgNeuerscheinung! Auslieferung Februar 2025
Vorbestellfrist für garantierte Lieferung: 24.06.2024
New paint scheme Era: early 2000s to 2008 UP series mixed; ex-SP 8499 to 8573; built 11/78 to 3/79 Road number 8715; ex-SP 8514 UP “Patch” former Southern Pacific ‘railroad roman’ lettered unit Fully-assembled No truck ground lights (prototype not equipped) Operating LED-illuminated front deck mounted ditch lights** Operating LED-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct* Removed and blanked front and rear red Pyle-National 17540 “UDE” Gyralites Blanked class lights with gaskets on front and bolted plates on rear Printed number boards with separately controlled backlit LED-illumination* Directional LED headlights Front late SP/UP-style pilot plow with MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Front "tall" stepwells with see-through steps and rear “ladder” steps 88” low short hood with wheel handbrake Bolted battery box doors with wide louvers Late cab sub-base doors with lift-off hinges SP nose headlight package Dash-2 cab with bolted side window panels, SP/SSW blue flag bracket, and modified “L” front window Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Cab front door with additional door lock at top of door Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Rectangular vent on left cab side, towards rear of cab Standard EMD sunshades and long sunshade tracks Vapor Corp. cab roof HVAC Lost-wax brass Nathan AirChime P24R1 (“P-3”) three-chime horn on clearance bracket; offset to engineer’s side and mounted on number board housing “Whip” radio antenna mounted on ground plane over dust bin Early electrical cabinet "zig-zag" seam, further from rear of cab Welded ECAFB (late) Intermediate inertial air intake grills with top drip rail Extended-range dynamic brake Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets Straight rear uncoupling lever with four mounting brackets Handrail set with anticlimber front and rear end railing with outward facing mounting brackets, “breakaway” inner stanchions and chain Handrail ends and step faces painted white Front and rear 3-hose MU hose clusters with silver gladhands Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers Notched pilot faces with high mounted angled lifting slots Pilot-face mounted MU receptacle Front narrow “blunt” front anticlimber rear full-width front pilot anticlimber Scale sectioned treadplate detail on walkways Accurate hood door and long hood detail Standard turbo exhaust stack See-through dynamic brake intakes with resistor grid detail See-through standard 48” dynamic brake fan housings with fan blades visible inside Replacement ‘pan type’ fan top on second dynamic brake fan Detailed see-through radiator intake compartment with front and rear bulkheads, floor treadplate, and fan motor detail Etched-metal radiator exhaust grills with radiator shutters visible underneath Separate radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, late center axle snubbers, sanding lines and brackets (outboard only), and D-77 traction motor and air duct details Dimensionally accurate truck centers Speed recorder first axle, left side Forward facing handbrake chain mount for Flexicoil trucks Four-hole SP jacking pads Spare knuckle holders on rear pilot face Sill-mounted EFCO Frame-mounted bell Single Graham-White (Prime) brand 975-075 (can style) Standard air tanks 4,400 gallon fuel tank with reinforced tank edges where sides meet the tank ends, dual fuel fillers, dual vertical gauges, round gauge on stand and vertical breather pipe Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DC/DCC & sound ready locomotives also feature: Operable using a DC power pack DCC ready with 21-pin connector
Produktgewicht inkl. Verpackung: 1,320 kgNeuerscheinung! Auslieferung Februar 2025
Vorbestellfrist für garantierte Lieferung: 24.06.2024
New paint scheme Era: early 2000s to 2008 UP series mixed; ex-SP 8230 to 8299; built 3/80 to 7/80 Road number 8782; ex-SP 8230 UP “Patch” former Southern Pacific speed lettered repaint Fully-assembled No truck ground lights (prototype not equipped) LED-illuminated-illuminated front deck mounted ditch lights** LED-illuminated-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct* Plated over front and blanked rear red Pyle-National 17540 “UDE” Gyralites Blanked class lights with gaskets on front and bolted plates on rear Printed number boards with separately controlled backlit LED-illumination* Directional LED headlights Front late SP/UP-style pilot plow with MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Front "tall" stepwells with see-through steps and rear “ladder” steps 88” low short hood with wheel handbrake Bolted battery box doors with wide louvers Late cab sub-base doors with lift-off hinges Dash-2 cab with welded side window panels, SP/SSW blue flag bracket, and modified “L” front window Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Cab front door with additional door lock at top of door Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Rectangular vent on left cab side, towards rear of cab Standard EMD sunshades and long sunshade tracks Vapor Corp. cab roof HVAC Lost-wax brass Nathan K3HA three-chime horn on clearance bracket, relocated to long hood roof “Whip” radio antenna mounted on ground plane over dust bin Late electrical cabinet "zig-zag" seam, closer to rear of cab Welded ECAFB (late) Late inertial air intake grilles with top and bottom drip rail "Post 1980" extended-range dynamic brake with exhaust silencer Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets Straight rear uncoupling lever with four mounting brackets Handrail set with anticlimber front and rear end railing with outward facing mounting brackets, “breakaway” inner stanchions and chain Handrail ends and step faces painted white Front and rear 3-hose MU hose clusters with silver gladhands Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers Notched pilot faces with high mounted angled lifting slots Pilot-face mounted MU receptacle Front narrow “blunt” front anticlimber rear full-width front pilot anticlimber Scale sectioned treadplate detail on walkways Accurate hood door and long hood detail “Post-1980” exhaust silencer See-through dynamic brake intakes with resistor grid detail See-through standard 48” dynamic brake fan housings with fan blades visible inside Detailed see-through radiator intake compartment with front and rear bulkheads, floor treadplate, and fan motor detail Etched-metal radiator exhaust grills with radiator shutters visible underneath Separate radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, late center axle snubbers, sanding lines and brackets (outboard only), and D-77 traction motor and air duct details Dimensionally accurate truck centers Speed recorder first axle, left side Forward facing handbrake chain mount for Flexicoil trucks Four-hole SP jacking pads Spare knuckle holders on rear pilot face Additional spare knuckle box only on front left truck sideframe Sill-mounted EFCO Frame-mounted bell Double Graham-White (Prime) brand 975-075 (can style) Standard air tanks 4,400 gallon fuel tank with reinforced tank edges where sides meet the tank ends, dual fuel fillers, dual vertical gauges, round gauge on stand and vertical breather pipe Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DC/DCC & sound ready locomotives also feature: Operable using a DC power pack DCC ready with 21-pin connector
Produktgewicht inkl. Verpackung: 1,320 kgNeuerscheinung! Auslieferung Februar 2025
Vorbestellfrist für garantierte Lieferung: 24.06.2024
New paint scheme Era: early 2000s to 2008 UP series mixed; ex-SP 8230 to 8299; built 3/80 to 7/80 Road number 8782; ex-SP 8230 UP “Patch” former Southern Pacific speed lettered repaint Fully-assembled No truck ground lights (prototype not equipped) LED-illuminated-illuminated front deck mounted ditch lights** LED-illuminated-Illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct* Plated over front and blanked rear red Pyle-National 17540 “UDE” Gyralites Blanked class lights with gaskets on front and bolted plates on rear Printed number boards with separately controlled backlit LED-illumination* Directional LED headlights Front late SP/UP-style pilot plow with MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Front "tall" stepwells with see-through steps and rear “ladder” steps 88” low short hood with wheel handbrake Bolted battery box doors with wide louvers Late cab sub-base doors with lift-off hinges Dash-2 cab with welded side window panels, SP/SSW blue flag bracket, and modified “L” front window Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Cab front door with additional door lock at top of door Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Rectangular vent on left cab side, towards rear of cab Standard EMD sunshades and long sunshade tracks Vapor Corp. cab roof HVAC Lost-wax brass Nathan K3HA three-chime horn on clearance bracket, relocated to long hood roof “Whip” radio antenna mounted on ground plane over dust bin Late electrical cabinet "zig-zag" seam, closer to rear of cab Welded ECAFB (late) Late inertial air intake grilles with top and bottom drip rail "Post 1980" extended-range dynamic brake with exhaust silencer Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets Straight rear uncoupling lever with four mounting brackets Handrail set with anticlimber front and rear end railing with outward facing mounting brackets, “breakaway” inner stanchions and chain Handrail ends and step faces painted white Front and rear 3-hose MU hose clusters with silver gladhands Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers Notched pilot faces with high mounted angled lifting slots Pilot-face mounted MU receptacle Front narrow “blunt” front anticlimber rear full-width front pilot anticlimber Scale sectioned treadplate detail on walkways Accurate hood door and long hood detail “Post-1980” exhaust silencer See-through dynamic brake intakes with resistor grid detail See-through standard 48” dynamic brake fan housings with fan blades visible inside Detailed see-through radiator intake compartment with front and rear bulkheads, floor treadplate, and fan motor detail Etched-metal radiator exhaust grills with radiator shutters visible underneath Separate radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, late center axle snubbers, sanding lines and brackets (outboard only), and D-77 traction motor and air duct details Dimensionally accurate truck centers Speed recorder first axle, left side Forward facing handbrake chain mount for Flexicoil trucks Four-hole SP jacking pads Spare knuckle holders on rear pilot face Additional spare knuckle box only on front left truck sideframe Sill-mounted EFCO Frame-mounted bell Double Graham-White (Prime) brand 975-075 (can style) Standard air tanks 4,400 gallon fuel tank with reinforced tank edges where sides meet the tank ends, dual fuel fillers, dual vertical gauges, round gauge on stand and vertical breather pipe Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Dual cube-type speakers EMD 16 Cylinder 645E3 prime mover ESU designed “PowerPack” with two super capacitors**** Operates on both DC and DCC layouts
Produktgewicht inkl. Verpackung: 1,320 kgNeuerscheinung! Auslieferung Februar 2025
Vorbestellfrist für garantierte Lieferung: 24.06.2024
New paint scheme Era: early 2000s to 2005 UP series mixed; ex-SP 8230 to 8299; built 3/80 to 7/80 Road number 8865; ex-SP 8288 UP “Patch” former Southern Pacific railroad roman lettered Fully-assembled No truck ground lights (prototype not equipped) LED-illuminated front deck mounted ditch lights** LED-illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct* Plated over front and blanked rear red Pyle-National 17540 “UDE” Gyralites Blanked class lights with gaskets on front and bolted plates on rear Printed number boards with separately controlled backlit LED-illumination* Directional LED headlights Front late SP/UP-style pilot plow with MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Front "tall" stepwells with see-through steps and rear “ladder” steps 88” low short hood with wheel handbrake Bolted battery box doors with wide louvers Late cab sub-base doors with lift-off hinges SP nose headlight package Dash-2 cab with welded side window panels, SP/SSW blue flag bracket, and modified “L” front window Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Cab front door with additional door lock at top of door Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Rectangular vent on left cab side, towards rear of cab Standard EMD sunshades and long sunshade tracks Vapor Corp. cab roof HVAC Lost-wax brass Nathan K3HA three-chime horn with shower caps on clearance bracket, relocated to long hood roof “Whip” radio antenna mounted on ground plane over dust bin Late electrical cabinet "zig-zag" seam, closer to rear of cab Welded ECAFB (late) Late inertial air intake grilles with top and bottom drip rail "Post 1980" extended-range dynamic brake with exhaust silencer Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets Straight rear uncoupling lever with four mounting brackets Handrail set with anticlimber front and rear end railing with outward facing mounting brackets, “breakaway” inner stanchions and chain Handrail ends and step faces painted white Front and rear 3-hose MU hose clusters with silver gladhands Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers Notched pilot faces with high mounted angled lifting slots Pilot-face mounted MU receptacle Front narrow “blunt” front anticlimber rear full-width front pilot anticlimber Scale sectioned treadplate detail on walkways Accurate hood door and long hood detail “Post-1980” exhaust silencer See-through dynamic brake intakes with resistor grid detail See-through standard 48” dynamic brake fan housings with fan blades visible inside Detailed see-through radiator intake compartment with front and rear bulkheads, floor treadplate, and fan motor detail Etched-metal radiator exhaust grills with radiator shutters visible underneath Separate radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, late center axle snubbers, sanding lines and brackets (outboard only), and D-77 traction motor and air duct details Dimensionally accurate truck centers Speed recorder first axle, left side Forward facing handbrake chain mount for Flexicoil trucks Four-hole SP jacking pads Spare knuckle holders on rear pilot along with spare knuckle boxes mounted to truck sideframes Sill-mounted EFCO Frame-mounted bell Double Graham-White (Prime) brand 975-075 (can style) Standard air tanks 4,400 gallon fuel tank with reinforced tank edges where sides meet the tank ends, dual fuel fillers, dual vertical gauges, round gauge on stand and vertical breather pipe Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” Dual cube-type speakers EMD 16 Cylinder 645E3 prime mover ESU designed “PowerPack” with two super capacitors**** Operates on both DC and DCC layouts
Produktgewicht inkl. Verpackung: 1,320 kgNeuerscheinung! Auslieferung Februar 2025
Vorbestellfrist für garantierte Lieferung: 24.06.2024
New paint scheme Era: early 2000s to 2005 UP series mixed; ex-SP 8230 to 8299; built 3/80 to 7/80 Road number 8865; ex-SP 8288 UP “Patch” former Southern Pacific railroad roman lettered Fully-assembled No truck ground lights (prototype not equipped) LED-illuminated front deck mounted ditch lights** LED-illuminated rectangular walkway lights mounted between front and rear sanding valve doors and round walkway light, aft of raised walkway duct* Plated over front and blanked rear red Pyle-National 17540 “UDE” Gyralites Blanked class lights with gaskets on front and bolted plates on rear Printed number boards with separately controlled backlit LED-illumination* Directional LED headlights Front late SP/UP-style pilot plow with MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Front "tall" stepwells with see-through steps and rear “ladder” steps 88” low short hood with wheel handbrake Bolted battery box doors with wide louvers Late cab sub-base doors with lift-off hinges SP nose headlight package Dash-2 cab with welded side window panels, SP/SSW blue flag bracket, and modified “L” front window Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Cab front door with additional door lock at top of door Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Rectangular vent on left cab side, towards rear of cab Standard EMD sunshades and long sunshade tracks Vapor Corp. cab roof HVAC Lost-wax brass Nathan K3HA three-chime horn with shower caps on clearance bracket, relocated to long hood roof “Whip” radio antenna mounted on ground plane over dust bin Late electrical cabinet "zig-zag" seam, closer to rear of cab Welded ECAFB (late) Late inertial air intake grilles with top and bottom drip rail "Post 1980" extended-range dynamic brake with exhaust silencer Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets Straight rear uncoupling lever with four mounting brackets Handrail set with anticlimber front and rear end railing with outward facing mounting brackets, “breakaway” inner stanchions and chain Handrail ends and step faces painted white Front and rear 3-hose MU hose clusters with silver gladhands Semi-scale coupler buffer equipped with ScaleTrains.com durable metal semi-scale E Type knuckle couplers Notched pilot faces with high mounted angled lifting slots Pilot-face mounted MU receptacle Front narrow “blunt” front anticlimber rear full-width front pilot anticlimber Scale sectioned treadplate detail on walkways Accurate hood door and long hood detail “Post-1980” exhaust silencer See-through dynamic brake intakes with resistor grid detail See-through standard 48” dynamic brake fan housings with fan blades visible inside Detailed see-through radiator intake compartment with front and rear bulkheads, floor treadplate, and fan motor detail Etched-metal radiator exhaust grills with radiator shutters visible underneath Separate radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, late center axle snubbers, sanding lines and brackets (outboard only), and D-77 traction motor and air duct details Dimensionally accurate truck centers Speed recorder first axle, left side Forward facing handbrake chain mount for Flexicoil trucks Four-hole SP jacking pads Spare knuckle holders on rear pilot along with spare knuckle boxes mounted to truck sideframes Sill-mounted EFCO Frame-mounted bell Double Graham-White (Prime) brand 975-075 (can style) Standard air tanks 4,400 gallon fuel tank with reinforced tank edges where sides meet the tank ends, dual fuel fillers, dual vertical gauges, round gauge on stand and vertical breather pipe Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and much more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22” DC/DCC & sound ready locomotives also feature: Operable using a DC power pack DCC ready with 21-pin connector
Produktgewicht inkl. Verpackung: 1,320 kg
Angebote
Topseller
Information
