All-new model Era: 1997 to 2005 Series 249135 to 249254, built 12/97 Road numbers 249180, 249186, 249198, 249216, 249223 and 249251 As delivered paint No conspicuity striping 2 x Version 4 Hood: Corner reinforcement, long side handrail, hood stacking brackets with solid inner guides Fully-assembled Multiple road numbers Body with dual trough design and center divider, sixteen walkway side supports and simulated wood trough interior. Designed for the use of two hoods although, depending on the type of steel, the car can be run without hoods as well. Body has four wireform side grab irons and four wireform end grab irons Each hood is constructed with up to 27 individual parts including 12 photo etched handrail stanchions, six wireform handrails, four wireform grab irons, two hood stacking brackets, two hood top braces, and lifting bail Handbrake housing with finely detailed wheel and chain See-through photo-etched metal walkway Simulated wood interior floor using a hand applied wash Four (4) positionable load dividers Four (4) large unwrapped coil steel loads with metal weight inside each Factory-applied end handrails, hood guides, stanchions, load divider tracks, metal grab irons, coupler cut levers, and trainline hoses with silver gladhands Complete underbody brake system with over 20 separately applied parts including air reservoir, control valve, and retainer valve plus wireform plumbing and trainline pipe with brackets Durable body-mounted die-cast metal semi-scale SE Type lower shelf knuckle couplers Highly-detailed Barber S-2 100-ton trucks with finely rendered raised foundry data, rotating bearing caps, side bearing detail, and separate brake beam detail Printed reporting mark and road number on all four trucks 36” machined metal wheels with accurately profiled .110" wide wheel tread Operates on Code 70, 83 and 100 rail Printing and lettering legible even under magnification Paint colors match Tru-Color Paint color: TCP-172 Weathered Concrete Weighted to Industry standards for reliable operation Packaging safely stores model Recommended radius 18”

All-new model Era: 1994 to Mid 2010s Series 92050 to 92099, built 10-11/94 Road numbers 92050, 92067, 92070, 92078, 92089 and 92095 Fully-assembled Multiple road numbers Body with dual trough design and center divider, sixteen (16) walkway side supports and simulated wood trough interior. Designed for the use of two hoods although, depending on the type of steel, the car can be run without hoods as well. Body has four wireform side grab irons and four wireform end grab irons 2 x Version 2 Hood: Corner reinforcement, short side handrail with grab irons, hood stacking brackets with outer extensions Each hood is constructed with up to 27 individual parts including 12 photo etched handrail stanchions, six wireform handrails, four wireform grab irons, two hood stacking brackets, two hood top braces, and lifting bail Handbrake housing with finely detailed wheel and chain See-through photo-etched metal walkway Simulated wood interior floor using a hand applied wash Four (4) positionable load dividers Four (4) large unwrapped coil steel loads with metal weight inside each Factory-applied end handrails, hood guides, stanchions, load divider tracks, metal grab irons, coupler cut levers, and trainline hoses with silver gladhands Complete underbody brake system with over 20 separately applied parts including air reservoir, control valve, and retainer valve plus wireform plumbing and trainline pipe with brackets Durable body-mounted die-cast metal semi-scale SE Type lower shelf knuckle couplers Highly-detailed Barber S-2 100-ton trucks with finely rendered raised foundry data, rotating bearing caps, side bearing detail, and separate brake beam detail Printed reporting mark and road number on all four trucks 36” machined metal wheels with accurately profiled .110" wide wheel tread Operates on Code 70, 83 and 100 rail Printing and lettering legible even under magnification Paint colors match Tru-Color Paint color: TCP-199 ATSF Freight Car Brown Weighted to Industry standards for reliable operation Packaging safely stores model Recommended radius 18”

Neuerscheinung! Auslieferung März 2025

Era: 1987 to early 2000s Series 63900 to 63909; built 2/1987, P-S Lot 2016 Fully-assembled Multiple road numbers Articulated 5-unit well car built by Pullman-Standard (P-S), later Trinity (TRN) Capable of carrying 1 x 40’ or 2 x 20’ containers per well, with up to 48’ long container in top position per well (53’ containers possible in top position, staggered in every other well) Diecast bodies for optimum weight and performance Photo-etched stainless-steel see-through walkways Wire grab irons on side and end sills Durable Celcon corner uprights and vertical grabs Detailed floors and well interior sidewalls Separate Inter-Box Connector (IBC) details are included for loading in IBC holder boxes on the car deck Factory-applied metal grab irons, coupler cut levers, and trainline hoses Intricate multi-piece brake plumbing and rigging Semi-scale coupler boxes Durable body-mounted die-cast metal semi-scale lower shelf Type E couplers Highly detailed Barber S-2 70-ton trucks with 33” wheels at ends; Barber S-2 100-ton trucks with finely rendered raised foundry data; rotating black Timken three-sided bearing caps Printed reporting mark and road number on all six trucks 36” machined metal wheels with accurately profiled .110" wide wheel tread used on articulation point trucks and 33” machined metal wheels with accurately profiled .110" wide wheel tread used on outboard trucks Operates on Code 70, 83, and 100 rail Printing and lettering legible even under magnification Weighted to Industry standards for reliable operation Packaging safely stores model and single 40’ or 2 x 20’ container loaded per well (containers not included) Operator series 40’ Containers available separately Minimum radius: 22” (without customer-applied brake details parts installed) Recommended radius: 26” (with included customer-applied brake detail parts installed)

Neuerscheinung! Auslieferung März 2025

Era: 1987 to early 2000s Series 63900 to 63909; built 2/1987, P-S Lot 2016 Fully-assembled Multiple road numbers Articulated 5-unit well car built by Pullman-Standard (P-S), later Trinity (TRN) Capable of carrying 1 x 40’ or 2 x 20’ containers per well, with up to 48’ long container in top position per well (53’ containers possible in top position, staggered in every other well) Diecast bodies for optimum weight and performance Photo-etched stainless-steel see-through walkways Wire grab irons on side and end sills Durable Celcon corner uprights and vertical grabs Detailed floors and well interior sidewalls Separate Inter-Box Connector (IBC) details are included for loading in IBC holder boxes on the car deck Factory-applied metal grab irons, coupler cut levers, and trainline hoses Intricate multi-piece brake plumbing and rigging Semi-scale coupler boxes Durable body-mounted die-cast metal semi-scale lower shelf Type E couplers Highly detailed Barber S-2 70-ton trucks with 33” wheels at ends; Barber S-2 100-ton trucks with finely rendered raised foundry data; rotating black Timken three-sided bearing caps Printed reporting mark and road number on all six trucks 36” machined metal wheels with accurately profiled .110" wide wheel tread used on articulation point trucks and 33” machined metal wheels with accurately profiled .110" wide wheel tread used on outboard trucks Operates on Code 70, 83, and 100 rail Printing and lettering legible even under magnification Weighted to Industry standards for reliable operation Packaging safely stores model and single 40’ or 2 x 20’ container loaded per well (containers not included) Operator series 40’ Containers available separately Minimum radius: 22” (without customer-applied brake details parts installed) Recommended radius: 26” (with included customer-applied brake detail parts installed)

Neuerscheinung! Auslieferung März 2025

Era: 1987 to early 2000s Series 63900 to 63909; built 2/1987, P-S Lot 2016 Fully-assembled Multiple road numbers Articulated 5-unit well car built by Pullman-Standard (P-S), later Trinity (TRN) Capable of carrying 1 x 40’ or 2 x 20’ containers per well, with up to 48’ long container in top position per well (53’ containers possible in top position, staggered in every other well) Diecast bodies for optimum weight and performance Photo-etched stainless-steel see-through walkways Wire grab irons on side and end sills Durable Celcon corner uprights and vertical grabs Detailed floors and well interior sidewalls Separate Inter-Box Connector (IBC) details are included for loading in IBC holder boxes on the car deck Factory-applied metal grab irons, coupler cut levers, and trainline hoses Intricate multi-piece brake plumbing and rigging Semi-scale coupler boxes Durable body-mounted die-cast metal semi-scale lower shelf Type E couplers Highly detailed Barber S-2 70-ton trucks with 33” wheels at ends; Barber S-2 100-ton trucks with finely rendered raised foundry data; rotating black Timken three-sided bearing caps Printed reporting mark and road number on all six trucks 36” machined metal wheels with accurately profiled .110" wide wheel tread used on articulation point trucks and 33” machined metal wheels with accurately profiled .110" wide wheel tread used on outboard trucks Operates on Code 70, 83, and 100 rail Printing and lettering legible even under magnification Weighted to Industry standards for reliable operation Packaging safely stores model and single 40’ or 2 x 20’ container loaded per well (containers not included) Operator series 40’ Containers available separately Minimum radius: 22” (without customer-applied brake details parts installed) Recommended radius: 26” (with included customer-applied brake detail parts installed)

Neuerscheinung! Auslieferung März 2025

Era: 1987 to early 2000s Series 63900 to 63909; built 2/1987, P-S Lot 2016 Fully-assembled Multiple road numbers Articulated 5-unit well car built by Pullman-Standard (P-S), later Trinity (TRN) Capable of carrying 1 x 40’ or 2 x 20’ containers per well, with up to 48’ long container in top position per well (53’ containers possible in top position, staggered in every other well) Diecast bodies for optimum weight and performance Photo-etched stainless-steel see-through walkways Wire grab irons on side and end sills Durable Celcon corner uprights and vertical grabs Detailed floors and well interior sidewalls Separate Inter-Box Connector (IBC) details are included for loading in IBC holder boxes on the car deck Factory-applied metal grab irons, coupler cut levers, and trainline hoses Intricate multi-piece brake plumbing and rigging Semi-scale coupler boxes Durable body-mounted die-cast metal semi-scale lower shelf Type E couplers Highly detailed Barber S-2 70-ton trucks with 33” wheels at ends; Barber S-2 100-ton trucks with finely rendered raised foundry data; rotating black Timken three-sided bearing caps Printed reporting mark and road number on all six trucks 36” machined metal wheels with accurately profiled .110" wide wheel tread used on articulation point trucks and 33” machined metal wheels with accurately profiled .110" wide wheel tread used on outboard trucks Operates on Code 70, 83, and 100 rail Printing and lettering legible even under magnification Weighted to Industry standards for reliable operation Packaging safely stores model and single 40’ or 2 x 20’ container loaded per well (containers not included) Operator series 40’ Containers available separately Minimum radius: 22” (without customer-applied brake details parts installed) Recommended radius: 26” (with included customer-applied brake detail parts installed)

Neuerscheinung! Auslieferung März 2025

Era: 1987 to early 2000s Series 63900 to 63909; built 2/1987, P-S Lot 2016 Fully-assembled Multiple road numbers Articulated 5-unit well car built by Pullman-Standard (P-S), later Trinity (TRN) Capable of carrying 1 x 40’ or 2 x 20’ containers per well, with up to 48’ long container in top position per well (53’ containers possible in top position, staggered in every other well) Diecast bodies for optimum weight and performance Photo-etched stainless-steel see-through walkways Wire grab irons on side and end sills Durable Celcon corner uprights and vertical grabs Detailed floors and well interior sidewalls Separate Inter-Box Connector (IBC) details are included for loading in IBC holder boxes on the car deck Factory-applied metal grab irons, coupler cut levers, and trainline hoses Intricate multi-piece brake plumbing and rigging Semi-scale coupler boxes Durable body-mounted die-cast metal semi-scale lower shelf Type E couplers Highly detailed Barber S-2 70-ton trucks with 33” wheels at ends; Barber S-2 100-ton trucks with finely rendered raised foundry data; rotating black Timken three-sided bearing caps Printed reporting mark and road number on all six trucks 36” machined metal wheels with accurately profiled .110" wide wheel tread used on articulation point trucks and 33” machined metal wheels with accurately profiled .110" wide wheel tread used on outboard trucks Operates on Code 70, 83, and 100 rail Printing and lettering legible even under magnification Weighted to Industry standards for reliable operation Packaging safely stores model and single 40’ or 2 x 20’ container loaded per well (containers not included) Operator series 40’ Containers available separately Minimum radius: 22” (without customer-applied brake details parts installed) Recommended radius: 26” (with included customer-applied brake detail parts installed)

Neuerscheinung! Auslieferung März 2025

ew road numbers Era: 1990s to mid 2000s Road numbers 64009 Series DTTX 64005-64016 Class RWG50A, built 5-6/1987, lot 2017A Patched with large TTX “Speed Logos” Road number 64015 Series DTTX 64005-64016 Class RWG50A, built 5-6/1987, lot 2017A Patched with small TTX “Speed Logos” Road number 64037 Series DTTX 64021-64044 Class RWG50A, built 8-12/1987, lot 2024A Patched with medium TTX “Speed Logos” Fully-assembled Multiple road numbers Articulated 5-unit well car built by Pullman-Standard (P-S), later Trinity (TRN) Capable of carrying 1 x 40’ or 2 x 20’ containers per well, with up to 48’ long container in top position per well (53’ containers possible in top position, staggered in every other well) Diecast bodies for optimum weight and performance Photo-etched stainless-steel see-through walkways Wire grab irons on side and end sills Durable Celcon corner uprights and vertical grabs Detailed floors and well interior sidewalls Separate Inter-Box Connector (IBC) details are included for loading in IBC holder boxes on the car deck Factory-applied metal grab irons, coupler cut levers, and trainline hoses Intricate multi-piece brake plumbing and rigging Semi-scale coupler boxes Durable body-mounted die-cast metal semi-scale lower shelf Type E couplers Highly detailed Barber S-2 70-ton trucks with 33” wheels at ends; Barber S-2 100-ton trucks with finely rendered raised foundry data; rotating black Timken three-sided bearing caps Printed reporting mark and road number on all six trucks 36” machined metal wheels with accurately profiled .110" wide wheel tread used on articulation point trucks and 33” machined metal wheels with accurately profiled .110" wide wheel tread used on outboard trucks Operates on Code 70, 83, and 100 rail Printing and lettering legible even under magnification Weighted to Industry standards for reliable operation Packaging safely stores model and single 40’ or 2 x 20’ container loaded per well (containers not included) Operator series 40’ Containers available separately Minimum radius: 22” (without customer-applied brake details parts installed) Recommended radius: 26” (with included customer-applied brake detail parts installed)

Neuerscheinung! Auslieferung März 2025

ew road numbers Era: 1990s to mid 2000s Road numbers 64009 Series DTTX 64005-64016 Class RWG50A, built 5-6/1987, lot 2017A Patched with large TTX “Speed Logos” Road number 64015 Series DTTX 64005-64016 Class RWG50A, built 5-6/1987, lot 2017A Patched with small TTX “Speed Logos” Road number 64037 Series DTTX 64021-64044 Class RWG50A, built 8-12/1987, lot 2024A Patched with medium TTX “Speed Logos” Fully-assembled Multiple road numbers Articulated 5-unit well car built by Pullman-Standard (P-S), later Trinity (TRN) Capable of carrying 1 x 40’ or 2 x 20’ containers per well, with up to 48’ long container in top position per well (53’ containers possible in top position, staggered in every other well) Diecast bodies for optimum weight and performance Photo-etched stainless-steel see-through walkways Wire grab irons on side and end sills Durable Celcon corner uprights and vertical grabs Detailed floors and well interior sidewalls Separate Inter-Box Connector (IBC) details are included for loading in IBC holder boxes on the car deck Factory-applied metal grab irons, coupler cut levers, and trainline hoses Intricate multi-piece brake plumbing and rigging Semi-scale coupler boxes Durable body-mounted die-cast metal semi-scale lower shelf Type E couplers Highly detailed Barber S-2 70-ton trucks with 33” wheels at ends; Barber S-2 100-ton trucks with finely rendered raised foundry data; rotating black Timken three-sided bearing caps Printed reporting mark and road number on all six trucks 36” machined metal wheels with accurately profiled .110" wide wheel tread used on articulation point trucks and 33” machined metal wheels with accurately profiled .110" wide wheel tread used on outboard trucks Operates on Code 70, 83, and 100 rail Printing and lettering legible even under magnification Weighted to Industry standards for reliable operation Packaging safely stores model and single 40’ or 2 x 20’ container loaded per well (containers not included) Operator series 40’ Containers available separately Minimum radius: 22” (without customer-applied brake details parts installed) Recommended radius: 26” (with included customer-applied brake detail parts installed)

Neuerscheinung! Auslieferung März 2025

ew road numbers Era: 1990s to mid 2000s Road numbers 64009 Series DTTX 64005-64016 Class RWG50A, built 5-6/1987, lot 2017A Patched with large TTX “Speed Logos” Road number 64015 Series DTTX 64005-64016 Class RWG50A, built 5-6/1987, lot 2017A Patched with small TTX “Speed Logos” Road number 64037 Series DTTX 64021-64044 Class RWG50A, built 8-12/1987, lot 2024A Patched with medium TTX “Speed Logos” Fully-assembled Multiple road numbers Articulated 5-unit well car built by Pullman-Standard (P-S), later Trinity (TRN) Capable of carrying 1 x 40’ or 2 x 20’ containers per well, with up to 48’ long container in top position per well (53’ containers possible in top position, staggered in every other well) Diecast bodies for optimum weight and performance Photo-etched stainless-steel see-through walkways Wire grab irons on side and end sills Durable Celcon corner uprights and vertical grabs Detailed floors and well interior sidewalls Separate Inter-Box Connector (IBC) details are included for loading in IBC holder boxes on the car deck Factory-applied metal grab irons, coupler cut levers, and trainline hoses Intricate multi-piece brake plumbing and rigging Semi-scale coupler boxes Durable body-mounted die-cast metal semi-scale lower shelf Type E couplers Highly detailed Barber S-2 70-ton trucks with 33” wheels at ends; Barber S-2 100-ton trucks with finely rendered raised foundry data; rotating black Timken three-sided bearing caps Printed reporting mark and road number on all six trucks 36” machined metal wheels with accurately profiled .110" wide wheel tread used on articulation point trucks and 33” machined metal wheels with accurately profiled .110" wide wheel tread used on outboard trucks Operates on Code 70, 83, and 100 rail Printing and lettering legible even under magnification Weighted to Industry standards for reliable operation Packaging safely stores model and single 40’ or 2 x 20’ container loaded per well (containers not included) Operator series 40’ Containers available separately Minimum radius: 22” (without customer-applied brake details parts installed) Recommended radius: 26” (with included customer-applied brake detail parts installed)

Neuerscheinung! Auslieferung März 2025

New road numbers Era: 1987 to 2000s Series 64055 to 64069; built 8/1988, class RWG50C, lot 2065 Fully-assembled Multiple road numbers Articulated 5-unit well car built by Pullman-Standard (P-S), later Trinity (TRN) Capable of carrying 1 x 40’ or 2 x 20’ containers per well, with up to 48’ long container in top position per well (53’ containers possible in top position, staggered in every other well) Diecast bodies for optimum weight and performance Photo-etched stainless-steel see-through walkways Wire grab irons on side and end sills Durable Celcon corner uprights and vertical grabs Detailed floors and well interior sidewalls Separate Inter-Box Connector (IBC) details are included for loading in IBC holder boxes on the car deck Factory-applied metal grab irons, coupler cut levers, and trainline hoses Intricate multi-piece brake plumbing and rigging Semi-scale coupler boxes Durable body-mounted die-cast metal semi-scale lower shelf Type E couplers Highly detailed Barber S-2 70-ton trucks with 33” wheels at ends; Barber S-2 100-ton trucks with finely rendered raised foundry data; rotating black Timken three-sided bearing caps Printed reporting mark and road number on all six trucks 36” machined metal wheels with accurately profiled .110" wide wheel tread used on articulation point trucks and 33” machined metal wheels with accurately profiled .110" wide wheel tread used on outboard trucks Operates on Code 70, 83, and 100 rail Printing and lettering legible even under magnification Weighted to Industry standards for reliable operation Packaging safely stores model and single 40’ or 2 x 20’ container loaded per well (containers not included) Operator series 40’ Containers available separately Minimum radius: 22” (without customer-applied brake details parts installed) Recommended radius: 26” (with included customer-applied brake detail parts installed)

Neuerscheinung! Auslieferung März 2025

New road numbers Era: 1987 to 2000s Series 64055 to 64069; built 8/1988, class RWG50C, lot 2065 Fully-assembled Multiple road numbers Articulated 5-unit well car built by Pullman-Standard (P-S), later Trinity (TRN) Capable of carrying 1 x 40’ or 2 x 20’ containers per well, with up to 48’ long container in top position per well (53’ containers possible in top position, staggered in every other well) Diecast bodies for optimum weight and performance Photo-etched stainless-steel see-through walkways Wire grab irons on side and end sills Durable Celcon corner uprights and vertical grabs Detailed floors and well interior sidewalls Separate Inter-Box Connector (IBC) details are included for loading in IBC holder boxes on the car deck Factory-applied metal grab irons, coupler cut levers, and trainline hoses Intricate multi-piece brake plumbing and rigging Semi-scale coupler boxes Durable body-mounted die-cast metal semi-scale lower shelf Type E couplers Highly detailed Barber S-2 70-ton trucks with 33” wheels at ends; Barber S-2 100-ton trucks with finely rendered raised foundry data; rotating black Timken three-sided bearing caps Printed reporting mark and road number on all six trucks 36” machined metal wheels with accurately profiled .110" wide wheel tread used on articulation point trucks and 33” machined metal wheels with accurately profiled .110" wide wheel tread used on outboard trucks Operates on Code 70, 83, and 100 rail Printing and lettering legible even under magnification Weighted to Industry standards for reliable operation Packaging safely stores model and single 40’ or 2 x 20’ container loaded per well (containers not included) Operator series 40’ Containers available separately Minimum radius: 22” (without customer-applied brake details parts installed) Recommended radius: 26” (with included customer-applied brake detail parts installed)

Neuerscheinung! Auslieferung März 2025

New road numbers Era: 1987 to 2000s Series 64055 to 64069; built 8/1988, class RWG50C, lot 2065 Fully-assembled Multiple road numbers Articulated 5-unit well car built by Pullman-Standard (P-S), later Trinity (TRN) Capable of carrying 1 x 40’ or 2 x 20’ containers per well, with up to 48’ long container in top position per well (53’ containers possible in top position, staggered in every other well) Diecast bodies for optimum weight and performance Photo-etched stainless-steel see-through walkways Wire grab irons on side and end sills Durable Celcon corner uprights and vertical grabs Detailed floors and well interior sidewalls Separate Inter-Box Connector (IBC) details are included for loading in IBC holder boxes on the car deck Factory-applied metal grab irons, coupler cut levers, and trainline hoses Intricate multi-piece brake plumbing and rigging Semi-scale coupler boxes Durable body-mounted die-cast metal semi-scale lower shelf Type E couplers Highly detailed Barber S-2 70-ton trucks with 33” wheels at ends; Barber S-2 100-ton trucks with finely rendered raised foundry data; rotating black Timken three-sided bearing caps Printed reporting mark and road number on all six trucks 36” machined metal wheels with accurately profiled .110" wide wheel tread used on articulation point trucks and 33” machined metal wheels with accurately profiled .110" wide wheel tread used on outboard trucks Operates on Code 70, 83, and 100 rail Printing and lettering legible even under magnification Weighted to Industry standards for reliable operation Packaging safely stores model and single 40’ or 2 x 20’ container loaded per well (containers not included) Operator series 40’ Containers available separately Minimum radius: 22” (without customer-applied brake details parts installed) Recommended radius: 26” (with included customer-applied brake detail parts installed)

Neuerscheinung! Auslieferung März 2025

New HypoTypical paint scheme Era: 1987 to mid 1990s Series 64017 to 64020; built 1987; RWG50B, Lot 2017 Road number 64019 64019 features special Maersk steamship logos 2 dry 40’ Maersk Containers included 3 ‘tarp-top’ 40’ Maersk Containers included Fully-assembled Articulated 5-unit well car built by Pullman-Standard (P-S), later Trinity (TRN) Capable of carrying 1 x 40’ or 2 x 20’ containers per well, with up to 48’ long container in top position per well (53’ containers possible in top position, staggered in every other well) Diecast bodies for optimum weight and performance Photo-etched stainless-steel see-through walkways Wire grab irons on side and end sills Durable Celcon corner uprights and vertical grabs Detailed floors and well interior sidewalls Separate Inter-Box Connector (IBC) details are included for loading in IBC holder boxes on the car deck Factory-applied metal grab irons, coupler cut levers, and trainline hoses Intricate multi-piece brake plumbing and rigging Semi-scale coupler boxes Durable body-mounted die-cast metal semi-scale lower shelf Type E couplers Highly detailed Barber S-2 70-ton trucks with 33” wheels at ends; Barber S-2 100-ton trucks with finely rendered raised foundry data; rotating black Timken three-sided bearing caps Printed reporting mark and road number on all six trucks 36” machined metal wheels with accurately profiled .110" wide wheel tread used on articulation point trucks and 33” machined metal wheels with accurately profiled .110" wide wheel tread used on outboard trucks Operates on Code 70, 83, and 100 rail Printing and lettering legible even under magnification Weighted to Industry standards for reliable operation Packaging safely stores model and single 40’ or 2 x 20’ container loaded per well (containers not included) Operator series 40’ Containers available separately Minimum radius: 22” (without customer-applied brake details parts installed) Recommended radius: 26” (with included customer-applied brake detail parts installed)

Neuerscheinung! Auslieferung Juni 2025

• mit DCC Motordekoder
• mit Sound

Era: 2017 to Present Series 4043 to 4074, rebuilt 9/17 Road numbers 4071; ex-NS 8824 Horsehead scheme with DC to AC sinewave logo Rebuilt by NS Juniata Shops in Altoona, PA Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated front and rear deck-mounted alternating ditch lights** Operating LED-illuminated front, rear, and side walkway lights* Printed cab-mounted number boards with separately controlled LED-illumination* Directional LED-illuminated headlights LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Tall snowplow with MU hose openings and two (2) grab irons Semi-scale GE type coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Inside loop uncoupling levers with down brackets 4-step rear stepwells with see-through steps Walkway with front and rear anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front high (cab) mounted headlight Nose door without window; security padlock with hasp Two-piece nose top grab irons Battery cabinet access door with latch GE safety cab with four (4) side windows Right side cab under floor access doors: dual large louver panels per door Left side cab under floor access doors: bolted panel forward of the HVAC unit Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand In-cab grade crossing camera Tinted cab side windows Tall mirror mounted fore and aft of sliding cab side windows on left side, Tall mirror mounted fore of sliding cab side windows on right side; additional small mirror on right side JEM Communications PTC antenna farm with Sinclair antennas Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Continuous reinforcement rib under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Rearward right-side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and wide auxiliary cab filter box door Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Dual triangular lifting bails on top of clean air cab joint Early curved engine cab profile High mounted lift rings on engine cab power assembly doors Three left side door latches and two right door latches on exhaust cab doors Lost-wax brass cast Nathan AirChime K5LAR24 horn mounted on engine cab Early flanged exhaust stack housing “Bathtub” exhaust silencer 22 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Right side late radiator door grilles in alternating heights Right side radiator wing access door with two “T” handles and bolt detail around the door Electronic Handbrake with panel in front of the brake wheel Flat stamped Left rear hood door grille arrangement: tall, short, short grilles High-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Left side long rail all stanchions early type Right side long rail all stanchions early type Accurately profiled frame with separately-applied plumbing and traction motor cabling GE Hi-Ad trucks with reinforcement plate over center axle on right front and left rear side frames and separately applied brake cylinders, single bracket air plumbing, and rotating bearing caps Rust-color painted wheelsets No speed recorder Dual Graham-White (Salem) 824-100 centrifugal air filters Wabtec 994-500 series air dryer 5,000-gallon fuel tank with vertical wide spaced weld seams Fuel tank detail arrangement (front to back) right side – Fuel filler, EFCO, Digital Fuel Gauge Fuel tank mounted steel bell Separate air tanks with upper mounting brackets Curved handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Functions Two (2) cube-type speakers Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Neuerscheinung! Auslieferung Juni 2025

• DCC vorbereitet (Schnittstelle vorhanden)

Era: 2017 to Present Series 4043 to 4074, rebuilt 9/17 Road numbers 4071; ex-NS 8824 Horsehead scheme with DC to AC sinewave logo Rebuilt by NS Juniata Shops in Altoona, PA Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated front and rear deck-mounted alternating ditch lights** Operating LED-illuminated front, rear, and side walkway lights* Printed cab-mounted number boards with separately controlled LED-illumination* Directional LED-illuminated headlights LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Tall snowplow with MU hose openings and two (2) grab irons Semi-scale GE type coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Inside loop uncoupling levers with down brackets 4-step rear stepwells with see-through steps Walkway with front and rear anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front high (cab) mounted headlight Nose door without window; security padlock with hasp Two-piece nose top grab irons Battery cabinet access door with latch GE safety cab with four (4) side windows Right side cab under floor access doors: dual large louver panels per door Left side cab under floor access doors: bolted panel forward of the HVAC unit Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand In-cab grade crossing camera Tinted cab side windows Tall mirror mounted fore and aft of sliding cab side windows on left side, Tall mirror mounted fore of sliding cab side windows on right side; additional small mirror on right side JEM Communications PTC antenna farm with Sinclair antennas Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Continuous reinforcement rib under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Rearward right-side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and wide auxiliary cab filter box door Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Dual triangular lifting bails on top of clean air cab joint Early curved engine cab profile High mounted lift rings on engine cab power assembly doors Three left side door latches and two right door latches on exhaust cab doors Lost-wax brass cast Nathan AirChime K5LAR24 horn mounted on engine cab Early flanged exhaust stack housing “Bathtub” exhaust silencer 22 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Right side late radiator door grilles in alternating heights Right side radiator wing access door with two “T” handles and bolt detail around the door Electronic Handbrake with panel in front of the brake wheel Flat stamped Left rear hood door grille arrangement: tall, short, short grilles High-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Left side long rail all stanchions early type Right side long rail all stanchions early type Accurately profiled frame with separately-applied plumbing and traction motor cabling GE Hi-Ad trucks with reinforcement plate over center axle on right front and left rear side frames and separately applied brake cylinders, single bracket air plumbing, and rotating bearing caps Rust-color painted wheelsets No speed recorder Dual Graham-White (Salem) 824-100 centrifugal air filters Wabtec 994-500 series air dryer 5,000-gallon fuel tank with vertical wide spaced weld seams Fuel tank detail arrangement (front to back) right side – Fuel filler, EFCO, Digital Fuel Gauge Fuel tank mounted steel bell Separate air tanks with upper mounting brackets Curved handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound ready locomotives also feature: Operate on DC layouts DCC ready with 21-pin connector

Neuerscheinung! Auslieferung Juni 2025

• DCC vorbereitet (Schnittstelle vorhanden)

ra: 2017 to 2018 Series 4043 to 4073, rebuilt 7/17 Road number 4047; ex-NS 8781 Partial Horsehead paint scheme with primer-painted replacement cab Rebuilt by NS Roanoke Shops Fully re-painted at NS Juniata Shops in 11/18 Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated front and rear deck-mounted alternating ditch lights** Operating LED-illuminated front, rear, and side walkway lights* Printed cab-mounted number boards with separately controlled LED-illumination* Directional LED-illuminated headlights LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Tall snowplow with MU hose openings and two (2) grab irons Semi-scale GE type coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Inside loop uncoupling levers with down brackets 4-step rear stepwells with see-through steps Walkway with front and rear anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front high (cab) mounted headlight Nose door without window; security padlock with hasp Two-piece nose top grab irons Battery cabinet access door with latch GE safety cab with four (4) side windows Right side cab under floor access doors: dual large louver panels per door Left side cab under floor access doors: bolted panel forward of the HVAC unit Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand In-cab grade crossing camera Tinted cab side windows Tall mirror mounted fore and aft of sliding cab side windows on left side, Tall mirror mounted fore of sliding cab side windows on right side; additional small mirror on right side JEM Communications PTC antenna farm with Sinclair antennas Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Continuous reinforcement rib under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Rearward right-side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door with X panel in front Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Dual triangular lifting bails on top of clean air cab joint Early curved engine cab profile High mounted lift ring on left rear engine cab power assembly door Three left side door latches and two right door latches on exhaust cab doors Lost-wax brass cast Nathan AirChime K5LAR24 horn (all chimes forward) mounted on engine cab Early flanged exhaust stack housing “Bathtub” exhaust silencer 22 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Right side late radiator door grilles in alternating heights Right side radiator wing access door with looped center latch and no bolt detail on Panel surrounding the door Electronic Handbrake with panel to the rear of the brake wheel Concave stamped brakewheel with center hub Left rear hood door grille arrangement: tall, short, short grilles High-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Left side long rail all stanchions early type Right side long rail all stanchions early type Accurately profiled frame with separately-applied plumbing and traction motor cabling GE Hi-Ad trucks with reinforcement plate over center axle on right front and left rear side frames and separately applied brake cylinders, single bracket air plumbing, and rotating bearing caps Rust-color painted wheelsets No speed recorder Dual Graham-White (Salem) 824-100 centrifugal air filters Wabtec AirSmart 994-600 series air dryer 5,000-gallon fuel tank with vertical wide spaced weld seams Fuel tank detail arrangement (front to back) right side – Fuel filler, EFCO, Digital Fuel Gauge Fuel tank mounted steel bell Separate air tanks with upper mounting brackets Curved handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound ready locomotives also feature: Operate on DC layouts DCC ready with 21-pin connector

Neuerscheinung! Auslieferung Juni 2025

• mit DCC Motordekoder
• mit Sound

ra: 2017 to 2018 Series 4043 to 4073, rebuilt 7/17 Road number 4047; ex-NS 8781 Partial Horsehead paint scheme with primer-painted replacement cab Rebuilt by NS Roanoke Shops Fully re-painted at NS Juniata Shops in 11/18 Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated front and rear deck-mounted alternating ditch lights** Operating LED-illuminated front, rear, and side walkway lights* Printed cab-mounted number boards with separately controlled LED-illumination* Directional LED-illuminated headlights LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Tall snowplow with MU hose openings and two (2) grab irons Semi-scale GE type coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Inside loop uncoupling levers with down brackets 4-step rear stepwells with see-through steps Walkway with front and rear anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front high (cab) mounted headlight Nose door without window; security padlock with hasp Two-piece nose top grab irons Battery cabinet access door with latch GE safety cab with four (4) side windows Right side cab under floor access doors: dual large louver panels per door Left side cab under floor access doors: bolted panel forward of the HVAC unit Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand In-cab grade crossing camera Tinted cab side windows Tall mirror mounted fore and aft of sliding cab side windows on left side, Tall mirror mounted fore of sliding cab side windows on right side; additional small mirror on right side JEM Communications PTC antenna farm with Sinclair antennas Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Continuous reinforcement rib under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Rearward right-side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door with X panel in front Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Dual triangular lifting bails on top of clean air cab joint Early curved engine cab profile High mounted lift ring on left rear engine cab power assembly door Three left side door latches and two right door latches on exhaust cab doors Lost-wax brass cast Nathan AirChime K5LAR24 horn (all chimes forward) mounted on engine cab Early flanged exhaust stack housing “Bathtub” exhaust silencer 22 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Right side late radiator door grilles in alternating heights Right side radiator wing access door with looped center latch and no bolt detail on Panel surrounding the door Electronic Handbrake with panel to the rear of the brake wheel Concave stamped brakewheel with center hub Left rear hood door grille arrangement: tall, short, short grilles High-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Left side long rail all stanchions early type Right side long rail all stanchions early type Accurately profiled frame with separately-applied plumbing and traction motor cabling GE Hi-Ad trucks with reinforcement plate over center axle on right front and left rear side frames and separately applied brake cylinders, single bracket air plumbing, and rotating bearing caps Rust-color painted wheelsets No speed recorder Dual Graham-White (Salem) 824-100 centrifugal air filters Wabtec AirSmart 994-600 series air dryer 5,000-gallon fuel tank with vertical wide spaced weld seams Fuel tank detail arrangement (front to back) right side – Fuel filler, EFCO, Digital Fuel Gauge Fuel tank mounted steel bell Separate air tanks with upper mounting brackets Curved handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Functions Two (2) cube-type speakers Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Neuerscheinung! Auslieferung Juni 2025

• mit DCC Motordekoder
• mit Sound

All-new model Era: 2016 to Present Series 4000 to 4005, rebuilt 8/16 Road number 4004; ex-NS 8866 C40-9 Special black cab and gray carbody scheme with blue stripe mane Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated front and rear deck-mounted alternating ditch lights** Operating LED-illuminated front, rear, and side walkway lights* Printed cab-mounted number boards with separately controlled LED-illumination* Directional LED-illuminated headlights LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Tall snowplow with MU hose openings and two (2) grab irons Semi-scale GE type coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Inside loop uncoupling levers with down brackets 4-step rear stepwells with see-through steps Walkway with front and rear anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front high (cab) mounted headlight Nose door without window; security padlock with hasp Two-piece nose top grab irons Battery cabinet access door with latch GE safety cab with four (4) side windows Right side cab under floor access doors: dual large louver panels per door Left side cab under floor access doors: bolted panel forward of the HVAC unit Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand In-cab grade crossing camera Tinted cab side windows Tall mirror mounted fore and aft of sliding cab side windows on left side, Tall mirror mounted fore of sliding cab side windows on right side; additional small mirror on right side JEM Communications PTC antenna farm with Sinclair antennas Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Continuous reinforcement rib under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Rearward right-side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door with X panel in front Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors No lifting equipment for clean air cab joint Early curved engine cab profile No lift rings on engine cab power assembly door Three left side door latches and two right door latches on exhaust cab doors Lost-wax brass cast Nathan AirChime K5LAR24 horn mounted on engine cab Early flanged exhaust stack housing “Bathtub” exhaust silencer 22 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Right side late radiator door grilles in alternating heights Right side radiator wing access door with two “T” handles and bolt detail around the door Electronic Handbrake with panel in front of the brake wheel Convex stamped brakewheel Left rear hood door grille arrangement: tall, short, short grilles High-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Left side long rail all stanchions early type Right side long rail all stanchions early type Accurately profiled frame with separately-applied plumbing and traction motor cabling GE Hi-Ad trucks with reinforcement plate over center axle on right front and left rear side frames and separately applied brake cylinders, single bracket air plumbing, and rotating bearing caps Rust-color painted wheelsets No speed recorder Dual Graham-White (Salem) 824-100 centrifugal air filters Wabtec 994-500 series air dryer 5,000-gallon fuel tank with vertical wide spaced weld seams Fuel tank detail arrangement (front to back) right side - Fuel Filer, Digital Fuel Gauge, EFCO Fuel tank mounted steel bell Separate air tanks with upper mounting brackets Curved handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Functions Two (2) cube-type speakers Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Neuerscheinung! Auslieferung Juni 2025

• DCC vorbereitet (Schnittstelle vorhanden)

All-new model Era: 2016 to Present Series 4000 to 4005, rebuilt 8/16 Road number 4004; ex-NS 8866 C40-9 Special black cab and gray carbody scheme with blue stripe mane Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated front and rear deck-mounted alternating ditch lights** Operating LED-illuminated front, rear, and side walkway lights* Printed cab-mounted number boards with separately controlled LED-illumination* Directional LED-illuminated headlights LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Tall snowplow with MU hose openings and two (2) grab irons Semi-scale GE type coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Inside loop uncoupling levers with down brackets 4-step rear stepwells with see-through steps Walkway with front and rear anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front high (cab) mounted headlight Nose door without window; security padlock with hasp Two-piece nose top grab irons Battery cabinet access door with latch GE safety cab with four (4) side windows Right side cab under floor access doors: dual large louver panels per door Left side cab under floor access doors: bolted panel forward of the HVAC unit Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s AAR-style control stand In-cab grade crossing camera Tinted cab side windows Tall mirror mounted fore and aft of sliding cab side windows on left side, Tall mirror mounted fore of sliding cab side windows on right side; additional small mirror on right side JEM Communications PTC antenna farm with Sinclair antennas Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Continuous reinforcement rib under dynamic brake intake grilles High-capacity dynamic brake exhaust (3-port) Rearward right-side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door with X panel in front Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors No lifting equipment for clean air cab joint Early curved engine cab profile No lift rings on engine cab power assembly door Three left side door latches and two right door latches on exhaust cab doors Lost-wax brass cast Nathan AirChime K5LAR24 horn mounted on engine cab Early flanged exhaust stack housing “Bathtub” exhaust silencer 22 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Right side late radiator door grilles in alternating heights Right side radiator wing access door with two “T” handles and bolt detail around the door Electronic Handbrake with panel in front of the brake wheel Convex stamped brakewheel Left rear hood door grille arrangement: tall, short, short grilles High-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Left side long rail all stanchions early type Right side long rail all stanchions early type Accurately profiled frame with separately-applied plumbing and traction motor cabling GE Hi-Ad trucks with reinforcement plate over center axle on right front and left rear side frames and separately applied brake cylinders, single bracket air plumbing, and rotating bearing caps Rust-color painted wheelsets No speed recorder Dual Graham-White (Salem) 824-100 centrifugal air filters Wabtec 994-500 series air dryer 5,000-gallon fuel tank with vertical wide spaced weld seams Fuel tank detail arrangement (front to back) right side - Fuel Filer, Digital Fuel Gauge, EFCO Fuel tank mounted steel bell Separate air tanks with upper mounting brackets Curved handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22” DCC & sound ready locomotives also feature: Operate on DC layouts DCC ready with 21-pin connector