Road Number Specific ScaleTrains Fully assembled "Joe Jordan" Two (2) roof equipment boxes Water plumbing details. Unique weld seam locations Riveted end access plates Commonwealth 3-axle trucks with rotating bearing caps 24,000-gallon capacity Non-insulated Intricate electrical and water plumbing Handbrake housing with finely detailed wheel and chain Factory-applied air tank, brake cylinder, and control valve Brake beam Underbody brake details and plumbing Factory-applied multiple unit (MU) hoses, coupler cut levers, and trainline hoses Durable body-mounted metal semi-scale Type E knuckle couplers 36” machined metal wheels Accurately profiled .110" wide wheel tread Directional front and rear LED lighting 2-function DCC programmable decoder Operate using DC and DCC Operates on Code 70, 83 and 100 rail Printing and lettering legible even under magnification Weighted above Industry standards Packaging safely stores model Truck safety chains available separately (SXT80111) – requires 22” minimum radius curve Minimum radius: 18”

• mit DCC Motordekoder
• mit Sound

Road Number Specific ScaleTrains All-new model Era: 2007+ Series 100 to 199; built 4-5/95 Road number 177 Yellow swapped HVAC unit Yellow sill stripes Gray swapped air tanks Road number 199 Gray swapped HVAC unit Yellow sill stripes Gray swapped air tanks Fully-assembled Multiple road numbers LED-illuminated front deck-mounted ditch lights LED-illuminated high-mount cab number boards* Directional LED-illuminated headlights Painted and factory-applied detail parts: wire grab irons; trainline hoses with silver gladhands; 3-hose MU clusters with silver gladhands; MU cable, uncoupling levers; windshield wipers; mirrors; sunshades; brake wheel; and more Tall snowplow with open doors and grab irons Semi-scale Type E knuckle couplers – Micro-Trains® compatible Body mounted coupler box – accepts Micro-Trains® 1015/1016 type couplers without modification 5-step stepwells Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Nose door with window Two-piece nose top grab irons Front LED-illuminated headlight with lenses on low short hood (low headlight) Battery cabinet access door without latch GE safety cab with three (3) side windows Right side cab under floor access doors: four screened louver sections per door Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit Detailed cab interior with floor, rear wall, seats, and desktop Tinted cab side windows Large Sinclair “ice skate” communication antenna; small Sinclair “ice skate” End of Train (EOT) telemetry antenna Early: six (6) tall vertical rectangular bolted panels and three (3) horizontal short panels Continuous reinforcement rib under dynamic brake intake grilles Standard dynamic brake exhaust (2-port) Forward right-side air intake grille Left side auxiliary cab: three (3) tall doors with latches on the #2 Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Early curved engine cab profile Lost-wax brass cast Nathan AirChime P3 (P24R1 configuration) horn mounted on engine cab “Bathtub” exhaust silencer 2 individually applied etched metal radiator exhaust grilles. Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, short grilles Low-mounted rear sandfiller Early “box” lifting lugs on ends of radiator wings Rear LED-illuminated vertical headlight with lenses Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders and air plumbing Dual Graham-White (Prime) 975-075 air filters Graham-White 975-100 “twin tower” air filter dryer 5,000 gallon fuel tank Single fuel fills per side Round and vertical analog fuel gauges; digital fuel gauges Fuel tank mounted steel bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Early square handbrake chain bracket SP-style spare coupler knuckle boxes on rear pilot face Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum Radius: 9 ¾” Recommended Radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 Nano DCC & sound decoder with “Full Throttle” Cube-type speaker Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts DC/DCC ready locomotives also feature: Operates on DC layouts DCC ready with Nano connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate

• DCC vorbereitet (Schnittstelle vorhanden)

Era: 2000’s to presen Factory-applied detail parts: wire grab irons, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, MU cable, uncoupling levers, windshield wipers, mirrors, sunshades, brake wheel, and more, Tall snowplow with open doors and grab irons, Semi-scale Type E knuckle couplers – Micro-Trains® compatible, Body mounted coupler box – accepts Micro-Trains® 1015/1016 type couplers without modification, 5-step stepwells, Walkway with front anticlimber, GE “nub” pattern walkway tread, Narrow profile end handrails, Nose door without window, Front LED-illuminated headlight with lenses on low short hood, GE safety cab with three (3) side windows, Detailed cab interior with floor, rear wall, seats, and desktop, Tinted cab side windows, Large Sinclair “ice skate” communications antenna, small Sinclair “ice skate” End of Train (EOT) telemetry antenna, “wedge” antenna, and GPS dome, Motive Equipment Inc. (MEI) ME7000 HVAC Unit, Early (curved) engine cab profile, Early flanged exhaust stack housing, “Bathtub” exhaust silencer, Early radiator door grille pattern (all the same height), Low-mounted rear sandfiller, Early lifting lugs on ends of radiator wings, Rear LED-illuminated vertical headlight with lenses, Accurately profiled frame with separately applied plumbing and cabling, GE Hi-Ad trucks with separately applied brake cylinders and air plumbing, Separate air tanks with upper mounting brackets, Fuel tank mounted steel bell, 5,000 gallon fuel tank, Dual fuel fills per side with rear fill “blanked”, Motor with 5-pole skew wound armature, Dual flywheels, All-wheel drive, All-wheel electrical pick-up, Printing and lettering legible under magnification, Operates on Code 55 and 80 rail, Packaging safely stores model, Minimum Radius: 9 ¾”, Recommended Radius: 11”, DC/DCC ready locomotives also features: Operates on DC layouts DCC ready with Next18 connector

• mit DCC Motordekoder
• mit Sound

Road number 9647 (ex-SP 8183) Era: 2000-2014 Patched former Southern Pacific unit Unique destressed paint and lettering Last patched SP C44-9W before repainting Yellow sill stripes Fully-assembled Multiple road numbers Operating LED-illuminated front deck-mounted ditch lights* Printed and LED-illuminated number boards* Factory-applied detail parts: wire grab irons, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, MU cable, uncoupling levers, windshield wipers, mirrors, sunshades, brake wheel, and more Tall snowplow with open doors and grab irons Semi-scale Type E knuckle couplers – Micro-Trains® compatible Body mounted coupler box – accepts Micro-Trains® 1015/1016 type couplers without modification 5-step stepwells Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Nose door without window Front LED-illuminated headlight with lenses on low short hood GE safety cab with three (3) side windows Detailed cab interior with floor, rear wall, seats, and desktop Tinted cab side windows Large Sinclair “ice skate” communications antenna, small Sinclair “ice skate” End of Train (EOT) telemetry antenna, “wedge” antenna, and GPS dome Motive Equipment Inc. (MEI) ME7000 HVAC Unit Early (curved) engine cab profile Early flanged exhaust stack housing “Bathtub” exhaust silencer Early radiator door grille pattern (all the same height) Low-mounted rear sandfiller Early lifting lugs on ends of radiator wings Rear LED-illuminated vertical headlight with lenses Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with separately applied brake cylinders and air plumbing Separate air tanks with upper mounting brackets Fuel tank mounted steel bell 5,000 gallon fuel tank Dual fuel fills per side with rear fill “blanked” Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum Radius: 9 ¾” Recommended Radius: 11” DCC & sound equipped locomotives also feature ESU-LokSound 5 Micro DCC & sound decoder with “Full Throttle” Cube-type speaker Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

• mit DCC Motordekoder

Black Trucks Road Number Specific Era: late 1960s to 1980s Fully assembled 24-C-GTE Class insulated body 24,000-gallon capacity Welded seams Intricate electrical and water plumbing Factory-applied air tank, brake cylinder, and control valve Brake beam Handbrake housing with finely detailed wheel and chain Factory-applied multiple unit (MU) hoses, coupler cut levers, and trainline hoses Durable body-mounted die-cast metal semi-scale Type E knuckle couplers Commonwealth 3-axle trucks with rotating bearing caps 36” machined metal wheels Accurately profiled .110" wide wheel tread Directional front and rear LED lighting 2-function DCC programmable decoder Operate using DC and DCC Operates on Code 70, 83 and 100 rail Printing and lettering legible even under magnification Weighted above Industry standards Packaging safely stores model Color matched to existing Tru-Color Paint colors whenever possible Minimum radius: 18” Truck safety chains available separately (SXT80111) – requires 22” minimum radius curve

• mit DCC Motordekoder

Silver Trucks Road Number Specific Era: late 1960s to 1980s Fully assembled 24-C-GTE Class insulated body 24,000-gallon capacity Welded seams Intricate electrical and water plumbing Factory-applied air tank, brake cylinder, and control valve Brake beam Handbrake housing with finely detailed wheel and chain Factory-applied multiple unit (MU) hoses, coupler cut levers, and trainline hoses Durable body-mounted die-cast metal semi-scale Type E knuckle couplers Commonwealth 3-axle trucks with rotating bearing caps 36” machined metal wheels Accurately profiled .110" wide wheel tread Directional front and rear LED lighting 2-function DCC programmable decoder Operate using DC and DCC Operates on Code 70, 83 and 100 rail Printing and lettering legible even under magnification Weighted above Industry standards Packaging safely stores model Color matched to existing Tru-Color Paint colors whenever possible Minimum radius: 18” Truck safety chains available separately (SXT80111) – requires 22” minimum radius curve

• mit DCC Motordekoder

Metallradsätze, sehr detailliert mit vielen separat angebrachten Details Road Number Specific All-new model Fully assembled 24-C-GTE Class insulated body 24,000-gallon capacity Welded seams Intricate electrical and water plumbing Factory-applied air tank, brake cylinder, and control valve Brake beam Handbrake housing with finely detailed wheel and chain Factory-applied multiple unit (MU) hoses, coupler cut levers, and trainline hoses Durable body-mounted die-cast metal semi-scale Type E knuckle couplers Commonwealth 3-axle trucks with SKF bearings 36” machined metal wheels Accurately profiled .110" wide wheel tread Directional front and rear LED lighting 2-function DCC programmable decoder Operate using DC and DCC Operates on Code 70, 83 and 100 rail Truck safety chains available separately (SXT80111) – requires 22” minimum radius curve Printing and lettering legible even under magnification Color matched to Tru-Color paint Weighted above Industry standards Packaging safely stores model Minimum radius: 18”

• mit DCC Motordekoder

Fully assembled, 23-C-GTE Class riveted body, 23,000-gallon capacity, Riveted seams, Photo-etched metal tender deck walkway, Intricate electrical and water plumbing, Factory-applied air tank, brake cylinder, and control valve, Brake beam, Handbrake housing with finely detailed wheel and chain, Factory-applied multiple unit (MU) hoses, coupler cut levers, and trainline hoses, Durable body-mounted die-cast metal semi-scale Type E knuckle couplers, Buckeye 3-axle trucks with SKF bearings, 36” machined metal wheels, Accurately profiled .110" wide wheel tread, Operating rear tender LED light, 2-function DCC programmable decoder, Operate using DC and DCC, Operates on Code 70, 83 and 100 rail, Truck safety chains available separately (SXT80111) – requires 22” minimum radius curve, Printing and lettering legible even under magnification, Color matched to Tru-Color paint, Weighted above Industry standards, Packaging safely stores model, Minimum radius: 18”

- geeignet für FA1, FA2, FB1, FB2, RS2, RS3, RS10, RSC2, RSD4, RSD5, RSD7, PA1, PA2, PB1, PB2

Tsunami TSU-AT 1000 DCC Sound Decoder, einfacher Einbau, Motordecoder, Lichtsteuerung und Digitalsound auf einer Platine

- geeignet für RSD15, RSD17; C628, C630, C636, C630M, C855

Tsunami TSU-BW1000 DCC Sound Decoder, einfacher Einbau, Motordecoder, Lichtsteuerung und Digitalsound auf einer Platine

- geeignet für AS-16, AS-416, AS-616, DR-4-4-1500, DR-6-4-1500, RF-16, DRS-6-4-1500, DRS-4-4--1500, DRS-6-6-1500

Tsunami TSU-BW1000 DCC Sound Decoder, einfacher Einbau, Motordecoder, Lichtsteuerung und Digitalsound auf einer Platine

- geeignet für RS11, RSD, RS32, RS36, C420, M420, C424, RD-18, FPA4, FPB4 - für analogen und digitalen Betrieb geeignet -

Tsunami TSU-1000 DCC Sound Decoder, einfacher Einbau, Motordecoder, Lichtsteuerung und Digitalsound auf einer Platine. - DCC-Norm - 16-bit Soundprozessor - Sound läuft synchron zur Geschwindigkeit, einstellbar. - 14 Funktionen - 4 Lichteffekte einstellbar - Hyperlight Lighting System - unter 14 versch. Lichteffekten wählen - Lautstärkeregelung - 1W / 8 Ohm Verstärker - 4-stellige Lokadressen bis 9999 - Motordecoder bis 1 A / 27V belastbar - jeder Funktionsausgang bis 100 mA belastbar - mit Kondensator - Hyperdrive Motion Control System mit 2048 Fahrstufen - ohne Lausprecher

- für analogen und digitalen Betrieb geeignet -

Tsunami Sound Decoder, einfacher Einbau, Motordecoder, Lichtsteuerung und Digitalsound auf einer Platine. Die 28 Funktionen wie Glocke, Horn, Luftpumpe, Dampf, Kupplung, Bremsen, Generator, Kohle schaufeln, usw. lassen sich über die F-Tasten auslösen und nach Wahl verschieben. Die Laustärke der einzelnen Soundeffekte läßt sich über CV individuell einstellen. Besitzer der Digitrax DT-400 werden zusätzlich einen hörbaren Unterschied zu anderen Steuerungen feststellen. - DCC-Norm - 32-bit Soundprozessor - Soundverstärker mit noch mehr Leistung - Sound läuft synchron zur Geschwindigkeit, einstellbar. - 28 Funktionen - 4 Lichteffekte einstellbar - einstellbare Bremsen - Hyperlight Lighting System - unter 20 versch. Lichteffekten wählen - Flex-Map functi on mapping - Funktionen verschieben - Lautstärkeregelung - 2W / 8 Ohm Verstärker - 4-stellige Lokadressen bis 9999 - Motordecoder bis 1 A / 22V belastbar - jeder Funktionsausgang bis 100 mA belastbar - 30.5 x 15.5 x 6.5mm - ohne Lausprecher - 7.5V – 22V Diesellok: - jede Dieselversion (EMD, GE usw.) enthält bis zu 9 Hersteller spezifische Motoren (mit/ohne Turbo usw.) - Anlassen und herunter Fahren in 8 Stufen - Danamische Bremse und Dieselsound unter Last/Beladung einstellbar - über 40 Hörner einstellbar - versch. Effekte wie Kompressor, Glocke Kupplung usw. - Fireman Ed is ready to work, versch. Cab Sounds wählbar - Schienenklackern, Tanken, Cab Unterhaltung

- 3er Packung

Bausatz

Augen bewegen sich

Augen bewegen sich

Augen bewegen sich

Augen bewegen sich