Digitrax Easy Connect 8 Pin Plug to 8 pin DCC medium plug Motor & Function Decoder that fits many N and HO Scale Locos. 22.16mm x 10.28mm x 5.1mm •1.0 Amp/1.5 Amps Peak •6 FX3 Functions, 0.5 Amp •Digitrax Easy Connect 8 Pin Plug to 8 pin DCC medium plug. •Works with PX112-6F Power Xtender.

Fits Next18 socket locomotives Plug-in Next18 connector Motor drive at connector capacity 6 FX3 Functions

DNDP 5-Pack Dummy plug for Digitrax N scale Harness system Lets you run locos as DC or DCC For DC only operation use the dummy plug with either DNWH or DNWHPS For DCC operation remove the DNDP and replacewith a decoder 5-Pack

5er Pack Kabel mit 9 Pin Stecker (passt in Digitrax Decoder)

Kabel mit 9 Pin Stecker (passt in Digitrax Decoder) auf DCC Normstecker (für Loks mit DCC Schnittstelle nach NEM 652).

Digitrax LocoMotion™ System Your locomotives look like the real thing. The Digitrax LocoMotion™ System makes them run like the real thing, too! Torque Compensation for smooth as silk silent operation. 128 Speed Step operation (14 or 28 steps can also be used). Momentum with acceleration and deceleration. Normal Direction of Travel is user selectable. Switching Speed feature for easier and faster access to yard speeds. 3 Step Speed Tables set start, mid and max voltage for custom control. 28 Step Speed Tables with 256 level resolution for precise control. SuperSonic™ motor drive for silent operation. FX 3 Function outputs for prototypical lighting effects and on/off control: Constant Brightness Lighting with directional or independent control Realistic Effects like Ditch lights, Mars lights, strobes, and many more. FX 3 & Standard Function Qualifiers operate functions based on direction, F0 on or off, direction and F0, and whether loco is moving. Function Remapping for custom function setup. Master Light Switch turns off all lights & functions with one keystroke. Decoder Lock equipped Transponder equipped ready for transponding on your layout. All Mode Programming with Operations Mode Read Back reads back CV values right on the mainline. Decoder Reset CV with or without speed table reset. Motor Isolation Protection prevents damage to your decoder. Basic, Advanced & UniVersal Consisting 2 Digit and 4 Digit Addressing Works with most DCC-ready Z, N, and HO scale locomotives up to 18V track voltage DCC Compatible FCC Part 15, Class B RFI compliant Current Rating 1.00 Amp (2.0 Amps Peak) 0.36” x 0.55 x 0.13” Size 9.14mm x 13.97mm x 3.3mm Installation Wired Function Outputs 2-500mA Function Type FX3 Features Economy Series 3

* This 2 function FX3 decoder is designed to fit MicroTrains Z scale GP-35 locos. This unit is shipping now. 128 Speed Step operation (14 or 28 steps can also be used). Momentum with acceleration and deceleration. Normal Direction of Travel is user selectable. 3 Step Speed Tables set start, mid and max voltage for custom control. 28 Step Speed Tables with 256 level resolution for precise control. SuperSonic™ motor drive for silent operation. FX 3 Function outputs for prototypical lighting effects and on/off control: Constant Brightness Lighting with directional or independent control FX 3 & Standard Function Qualifiers operate functions based on direction, F0 on or off, direction and F0, and whether loco is moving. Function Remapping for custom function setup. Decoder Lock equipped * All Mode Programming with Operations Mode Read Back reads back CV values right on the mainline. * Decoder Reset CV with or without speed table reset. * Motor Isolation Protection prevents damage to your decoder. * Basic, Advanced & UniVersal Consisting * 2 Digit and 4 Digit Addressing * DCC Compatible * FCC Part 15, Class B RFI compliant Current Rating 1.00 Amp (2.0 Amps Peak) Size 0.36” x 0.55 x 0.13” 9.14mm x 13.97mm x 3.3mm Installation Plug'N Play Function Outputs 2-500mA Function Type FX3 Features Economy Series 3

Digitrax LocoMotion System Your locomotives look like the real thing. The Digitrax LocoMotion System makes them run like the real thing, too! Torque Compensation for smooth as silk silent operation. 128 Speed Step operation (14 or 28 steps can also be used). Momentum with acceleration and deceleration. Normal Direction of Travel is user selectable. Switching Speed feature for easier and faster access to yard speeds. 3 Step Speed Tables set start, mid and max voltage for custom control. 28 Step Speed Tables with 256 level resolution for precise control. SuperSonic motor drive for silent operation. FX 3 Function outputs for prototypical lighting effects and on/off control: Constant Brightness Lighting with directional or independent control Realistic Effects like Ditch lights, Mars lights, strobes, and many more. FX 3 & Standard Function Qualifiers operate functions based on direction, F0 on or off, direction and F0, and whether loco is moving. Function Remapping for custom function setup. Master Light Switch turns off all lights & functions with one keystroke. Advanced Consist Function Controls Decoder Lock equipped Transponder equipped ready for transponding on your layout. All Mode Programming with Operations Mode Read Back reads back CV values right on the mainline. Decoder Reset CV with or without speed table reset. Motor Isolation Protection prevents damage to your decoder. Basic, Advanced & UniVersal Consisting 2 Digit and 4 Digit Addressing Works with most DCC-ready Z, N, and HO scale locomotives up to 18V track voltage DCC Compatible FCC Part 15, Class B RFI compliant Current Rating 1.00 Amp (2.0 Amps Peak) 0.36 x 0.55 x 0.13 Size 9.14mm x 13.97mm x 3.3mm Installation Approx. 1.25" harness to 8 pin Med Plug Function Outputs 2-500mA Function Type FX3 Features Economy Series 3

Current Rating-Motor1.0 Amp/1.25 Amps PeakSize0.271” x 1.296” x .099” (6.8834mm x 32.9184mm x 25.146mm)InstallationBoard Replacement (show less) These decoders are made to fit specific locomtoive chassis. Locomotives that have circuit boards that can have decoders installed in place of the original circuit board are made by many manufacturers. In some cases, locomotive modifications, motor isolation and additional soldering may be required during installation of this type of decoder. Function leads can be added to these decoders using solder pads available on the decoder. See the instruction sheet for the particular decoder you are using for specific instructions. Sometimes these are called plug n' play or drop in decoders. Function Outputs2-500mAFunction TypeFX3 (read more) Current Rating-Motor1.0 Amp/1.25 Amps PeakSize0.271” x 1.296” x .099” (6.8834mm x 32.9184mm x 25.146mm)InstallationBoard Replacement (show less) These decoders are made to fit specific locomtoive chassis. Locomotives that have circuit boards that can have decoders installed in place of the original circuit board are made by many manufacturers. In some cases, locomotive modifications, motor isolation and additional soldering may be required during installation of this type of decoder. Function leads can be added to these decoders using solder pads available on the decoder. See the instruction sheet for the particular decoder you are using for specific instructions. Sometimes these are called plug n' play or drop in decoders. Function Outputs2-500mAFunction TypeFX3 (read more) Current Rating-Motor1.0 Amp/1.25 Amps PeakSize0.271” x 1.296” x .099” (6.8834mm x 32.9184mm x 25.146mm)InstallationBoard Replacement (show less) These decoders are made to fit specific locomtoive chassis. Locomotives that have circuit boards that can have decoders installed in place of the original circuit board are made by many manufacturers. In some cases, locomotive modifications, motor isolation and additional soldering may be required during installation of this type of decoder. Function leads can be added to these decoders using solder pads available on the decoder. See the instruction sheet for the particular decoder you are using for specific instructions. Sometimes these are called plug n' play or drop in decoders. Function Outputs2-500mA FeaturesSeries 3 (read more) FeaturesSeries 3 (read more)

- SoundBug Compatible

- voltage up to 20 volts - Torque Compensation for smooth as silk silent operation. - 128 Speed Step operation (14 or 28 steps can also be used). - Momentum with acceleration and deceleration. - Normal Direction of Travel is user selectable. - Switching Speed feature for easier and faster access to yard speeds. - 3 Step Speed Tables set start, mid and max voltage for custom control. - 28 Step Speed Tables with 256 level resolution for precise control. - SuperSonic motor drive for silent operation. - FX 3 Function outputs for prototypical lighting effects and on/off control: - Constant Brightness Lighting with directional or independent control - Realistic Effects like Ditch lights, Mars lights, strobes, and many more. - FX 3 & Standard Function Qualifiers operate functions based on direction, - F0 on or off, direction and F0, and whether loco is moving. - Function Remapping for custom function setup. - Master Light Switch turns off all lights & functions with one keystroke. - Decoder Lock equipped - Transponder equipped ready for transponding on your layout. - All Mode Programming with Operations Mode Read Back reads back CV values right on the mainline. Decoder Reset CV with or without speed table reset. Motor Isolation Protection prevents damage to your decoder. Basic, Advanced & UniVersal Consisting 2 Digit and 4 Digit Addressing Works with most DCC-ready Z, N, and HO scale locomotives up to 18V track voltage DCC Compatible FCC Part 15, Class B RFI compliant Current Rating 1.00 Amp (2.0 Amps Peak) Size .418 x .340 x .112" 10.6mm x 8.7mm x 2.86mm (Approx. measurement without wires) Installation Wired Function Outputs 2-500mA Function Type FX3 Features

- Torque Compensation for smooth as silk silent operation. - 128 Speed Step operation (14 or 28 steps can also be used). - Momentum with acceleration and deceleration. - Normal Direction of Travel is user selectable. - Switching Speed feature for easier and faster access to yard speeds. - 3 Step Speed Tables set start, mid and max voltage for custom control. - 28 Step Speed Tables with 256 level resolution for precise control. - SuperSonic motor drive for silent operation. - FX 3 Function outputs for prototypical lighting effects and on/off control: - Constant Brightness Lighting with directional or independent control - Realistic Effects like Ditch lights, Mars lights, strobes, and many more. - FX 3 & Standard Function Qualifiers operate functions based on direction, - F0 on or off, direction and F0, and whether loco is moving. - Function Remapping for custom function setup. - Master Light Switch turns off all lights & functions with one keystroke. - Decoder Lock equipped - Transponder equipped ready for transponding on your layout. - BEMF equipped - All Mode Programming with Operations Mode Read Back reads back CV values right on the mainline. - Decoder Reset CV with or without speed table reset. - Motor Isolation Protection prevents damage to your decoder. - Basic, Advanced & UniVersal Consisting - 2 Digit and 4 Digit Addressing - Works with most DCC-ready Z, N, and HO scale locomotives up to 20V track voltage - DCC Compatible Current Rating 1.00 Amp (1.25 Amps Peak) Size .418 x .340 x .112" 10.6mm x 8.7mm x 2.86mm (Approx. measurement without pins) Installation 6 Pin NEM 651 Plug Function Outputs 2-500mA Function Type FX3

- SoundBug Compatible

- voltage up to 20 volts - Decoder with 8 Pin Plug - Torque Compensation for smooth as silk silent operation. - 128 Speed Step operation (14 or 28 steps can also be used). - Momentum with acceleration and deceleration. - Normal Direction of Travel is user selectable. - Switching Speed feature for easier and faster access to yard speeds. - 3 Step Speed Tables set start, mid and max voltage for custom control. - 28 Step Speed Tables with 256 level resolution for precise control. - SuperSonic motor drive for silent operation. - FX 3 Function outputs for prototypical lighting effects and on/off control: - Constant Brightness Lighting with directional or independent control - Realistic Effects like Ditch lights, Mars lights, strobes, and many more. - FX 3 & Standard Function Qualifiers operate functions based on direction, - F0 on or off, direction and F0, and whether loco is moving. - Function Remapping for custom function setup. - Master Light Switch turns off all lights & functions with one keystroke. - Decoder Lock equipped - Transponder equipped ready for transponding on your layout. - All Mode Programming with Operations Mode Read Back reads back CV values right on the mainline. Decoder Reset CV with or without speed table reset. Motor Isolation Protection prevents damage to your decoder. Basic, Advanced & UniVersal Consisting 2 Digit and 4 Digit Addressing Works with most DCC-ready Z, N, and HO scale locomotives up to 18V track voltage DCC Compatible FCC Part 15, Class B RFI compliant Current Rating 1.00 Amp (2.0 Amps Peak) Size .418 x .340 x .112" 10.6mm x 8.7mm x 2.86mm (Approx. measurement without wires) Installation Wired Function Outputs 2-500mA Function Type FX3 Features

# All New Tiny Footprint Decoder for Z, N, and HO! # All the great features and reliability of Digitrax decoders in a tiny package that will fit almost anywhere! # Works with Z, N, and HO scale locos # 1 Amp/1.25 Amps Peak Motor Current Rating # Digitrax LocoMotion® System * 2 FX3 Functions-500mA Total Function Current Rating * FX3 optimized for LEDs or lamps * Configurable FX3 Pulse Function available on all function outputs. * New Series 6 features * Due to the extremely small size of this decoder, it does not accept PX Power Xtenders. - Torque Compensation for smooth as silk silent operation. - 128 Speed Step operation (14 or 28 steps can also be used). - Momentum with acceleration and deceleration. - Normal Direction of Travel is user selectable. - Switching Speed feature for easier and faster access to yard speeds. - 3 Step Speed Tables set start, mid and max voltage for custom control. - 28 Step Speed Tables with 256 level resolution for precise control. - SuperSonic motor drive for silent operation. - FX 3 Function outputs for prototypical lighting effects and on/off control: - Constant Brightness Lighting with directional or independent control - Realistic Effects like Ditch lights, Mars lights, strobes, and many more. - FX 3 & Standard Function Qualifiers operate functions based on direction, - F0 on or off, direction and F0, and whether loco is moving. - Function Remapping for custom function setup. - Master Light Switch turns off all lights & functions with one keystroke. - Decoder Lock equipped - Transponder equipped ready for transponding on your layout. - BEMF equipped - All Mode Programming with Operations Mode Read Back reads back CV values right on the mainline. - Decoder Reset CV with or without speed table reset. - Motor Isolation Protection prevents damage to your decoder. - Basic, Advanced & UniVersal Consisting - 2 Digit and 4 Digit Addressing - Works with most DCC-ready Z, N, and HO scale locomotives up to 20V track voltage - DCC Compatible

1.0 Amp/1.5 Amps Peak •Program CVs using any Digitrax Compatible Control system without havingto buy any extra equipment. •2 Digit and 4 Digit Addressing. •Basic, Advanced & UniVersal Consisting. •SuperSonic motor drive for silent operation. •Direct mode programming. •Decoder Reset CV with or without speed table reset. •Transponder Equipped ready for transponding on your Layout. •Motor Isolation Protection helps prevent damage to your decoder. •Automatic Analog Mode Conversion when running on DC layout. •Decoder Lock for individual programming of multiple decoders in one loco. •Digitrax “No Worries” Warranty

* Series 6 Features * 4 FX3 Functions * .386” x .559” x .137” * 9.8mm x 14.2mm x 3.48mm

Torque Compensation for smooth as silk silent operation. 128 Speed Step operation (14 or 28 steps can also be used). Momentum with acceleration and deceleration, DCC Medium Plug. Normal Direction of Travel is user selectable. Switching Speed feature for easier and faster access to yard speeds. 3 Step Speed Tables set start, mid and max voltage for custom control. 28 Step Speed Tables with 256 level resolution for precise control. Z Scale Mobile Decoder 1.25 Amp/2 Amp Peak 4 FX 3 Functions, 0.5 Amp Current Rating 1.25 Amp (2.0 Amps Peak) Size 0.36? x 0.55 x 0.13 9.14mm x 13.97mm x 3.3mm Installation Wired Function Outputs 4-500mA

Kabel & Decoder Test Kit und Anschlusskabel, Anleitung in Deutsch.

Zum isolieren der Decoder vom Chassis. -70°C bis +260°C Hitzebeständig, 33 m lang, 20 mm breit

inklusive SPROG 3 Programmer, DecoderPro und Installationssoftware zum Download, USB Kabel Es wird ein Netzteil mit 12V und 3-4 Ampere separat benötigt und ist nicht enthalten! Dieses Gerät wird zum Programmieren und Auslesen von Decodern über den PC verwendet, Es wird ein Gleis und das Netzteil angeschlossen, sowie das Gerät per USB an den Computer verbunden. Dann kann der Decoder über die DecoderPro Software problemlos ausgelesen und neu programmiert werden. Auch ein sofortiger Test der neuen Einstellungen ist auf dem angeschlossenen Gleis möglich. So kann man bequem Lichtfunktionen, Geschwindigkeitskurven, Funktionen, usw. einstellen und sofort testen. SPROG ist kompatibel zu allen Decodern sämtlicher Hersteller die nach dem NMRA Standard hergestellt werden.

This adapter allows you to use our smallest decoder (The TSU-N18) in practically any n-scale model! Bring the TSU-N18's 6 functions plus a narrower profile to your models. The JST-Next18 Adapter features a Next18 socket to simply plug-in your TSU-N18 decoder and solder pads for additional functionality. Dimensions: 16 x 9.5 x 5mm Function Outputs: 6 Max Function Current: 100mA (ea. Output)