Innovation! Delivery May 2027

• prepared for DCC wiring
• with Sound

All-new model Era: 2015 to 2019 Series 514 to 516; built 11/14 Fully-assembled Multiple road numbers LED-illuminated front and rear deck-mounted alternating ditch lights** Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to pilot face Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber; no support brackets GE “nub” pattern walkway tread Late handrails with U-bolt caps and wide rear-most stanchion on long side Wide profile end handrails Sand box clean out door with knuckle buster latch and hinge Front nose headlight Front straight grab irons mounted directly to the nose Right nose door with window Nose door grab iron Front high-mounted (cab) numberboard housings Dual cab side blue flag holder Left side under cab front access bolted X panel; rear door with square corrugated grille Late cab with 4 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted between rear of sliding cab side windows and fixed rear window on engineer’s side Cab roof GE communications handler octagonal dome Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Dynamic brake cab door with high door handle and high-mounted door handle bumper Short right side air intake grille Left side auxiliary cab: 3 medium doors with latches on the #2 door and wide auxiliary cab filter box door Right side auxiliary cab: 4 doors with latches on #1 and #4 doors ET44 style engine cab doors: latched center door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched center door in set of three Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles - tall-short-tall-short-tall, no grille under brake wheel, short front angled grille, and two-piece rear angled grille Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, short, short, tall, short, tall, short front angled grill, two-piece rear angled grille Flat water fill box with sight glass High-mounted horizontal rear headlight Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Late GE steerable trucks with separately applied brake cylinders, air plumbing, and reinforcement bar under center journal Square handbrake chain bracket Toilet drain with exterior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Angled top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Cube-type speaker Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

Innovation! Delivery May 2027

• prepared for DCC wiring
• with Sound

All-new model Era: 2007 to 2014 Series 7670 to 7719; built 09/07-02/08 Fully-assembled Multiple road numbers LED-illuminated front and rear deck-mounted alternating ditch lights** Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to front anticlimber supports Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber and support brackets GE “nub” pattern walkway tread Early handrails with wrap-over stanchion heads, left long rail for no capacitor box, and right long rail with bolted head on 2nd lower stanchion Wide profile end handrails Sand box clean out door with knuckle buster latch and hinge Front high (cab) mounted headlight Left nose door with window Front high-mounted (cab) numberboard housings Left side under cab front access bolted X panel; rear door with square corrugated grille Early cab with 3 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted under rear sliding window on engineer side Cab roof GE communications handler octagonal dome, and GE I-Service communication system round dome antenna with conduit Dual-hinged and latched cabinet doors with barrel bolt latches Left side dynamic brake cab: front blower, bolted X panel, and rear blower dynamic brake with flush exhaust Right side dynamic brake cab: door with grille and latches forward, small flat panel, bolted on X-panel, door with grille and latches forward Dynamic brake cab door with low door handle and low-mounted door handle bumper Short right side air intake grille Left side auxiliary cab: 3 medium doors with latches on #2 door and short auxiliary cab filter box door Right side auxiliary cab: 4 doors with latches on #1 and #4 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles – tall-short-tall-tall-tall, short front angled grill, two-piece rear angled grille, no grille under brake wheel Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, tall, tall, tall, short, tall, short front angled grill, two-piece rear angled grille Angled water fill box High-mounted vertical rear headlight Rear anticlimber with support brackets Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with unused electric parking brake mounting brackets on right front side frame and separately applied brake cylinders, air plumbing Square handbrake chain bracket Toilet drain with exterior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Flat top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Cube-type speaker Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

Innovation! Delivery May 2027

• Ready for use with DCC (DCC interface)

All-new model Era: 2007 to 2014 Series 7670 to 7719; built 09/07-02/08 Fully-assembled Multiple road numbers LED-illuminated front and rear deck-mounted alternating ditch lights** Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to front anticlimber supports Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber and support brackets GE “nub” pattern walkway tread Early handrails with wrap-over stanchion heads, left long rail for no capacitor box, and right long rail with bolted head on 2nd lower stanchion Wide profile end handrails Sand box clean out door with knuckle buster latch and hinge Front high (cab) mounted headlight Left nose door with window Front high-mounted (cab) numberboard housings Left side under cab front access bolted X panel; rear door with square corrugated grille Early cab with 3 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted under rear sliding window on engineer side Cab roof GE communications handler octagonal dome, and GE I-Service communication system round dome antenna with conduit Dual-hinged and latched cabinet doors with barrel bolt latches Left side dynamic brake cab: front blower, bolted X panel, and rear blower dynamic brake with flush exhaust Right side dynamic brake cab: door with grille and latches forward, small flat panel, bolted on X-panel, door with grille and latches forward Dynamic brake cab door with low door handle and low-mounted door handle bumper Short right side air intake grille Left side auxiliary cab: 3 medium doors with latches on #2 door and short auxiliary cab filter box door Right side auxiliary cab: 4 doors with latches on #1 and #4 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles – tall-short-tall-tall-tall, short front angled grill, two-piece rear angled grille, no grille under brake wheel Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, tall, tall, tall, short, tall, short front angled grill, two-piece rear angled grille Angled water fill box High-mounted vertical rear headlight Rear anticlimber with support brackets Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with unused electric parking brake mounting brackets on right front side frame and separately applied brake cylinders, air plumbing Square handbrake chain bracket Toilet drain with exterior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Flat top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound ready locomotives also feature: Operate using DC DCC ready with Nano E24 connector

Innovation! Delivery May 2027

• Ready for use with DCC (DCC interface)

All-new model Era: 2007 to 2014 Series 7670 to 7719; built 09/07-02/08 Fully-assembled Multiple road numbers LED-illuminated front and rear deck-mounted alternating ditch lights** Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to front anticlimber supports Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber and support brackets GE “nub” pattern walkway tread Early handrails with wrap-over stanchion heads, left long rail for no capacitor box, and right long rail with bolted head on 2nd lower stanchion Wide profile end handrails Sand box clean out door with knuckle buster latch and hinge Front high (cab) mounted headlight Left nose door with window Front high-mounted (cab) numberboard housings Left side under cab front access bolted X panel; rear door with square corrugated grille Early cab with 3 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted under rear sliding window on engineer side Cab roof GE communications handler octagonal dome, and GE I-Service communication system round dome antenna with conduit Dual-hinged and latched cabinet doors with barrel bolt latches Left side dynamic brake cab: front blower, bolted X panel, and rear blower dynamic brake with flush exhaust Right side dynamic brake cab: door with grille and latches forward, small flat panel, bolted on X-panel, door with grille and latches forward Dynamic brake cab door with low door handle and low-mounted door handle bumper Short right side air intake grille Left side auxiliary cab: 3 medium doors with latches on #2 door and short auxiliary cab filter box door Right side auxiliary cab: 4 doors with latches on #1 and #4 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles – tall-short-tall-tall-tall, short front angled grill, two-piece rear angled grille, no grille under brake wheel Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, tall, tall, tall, short, tall, short front angled grill, two-piece rear angled grille Angled water fill box High-mounted vertical rear headlight Rear anticlimber with support brackets Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with unused electric parking brake mounting brackets on right front side frame and separately applied brake cylinders, air plumbing Square handbrake chain bracket Toilet drain with exterior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Flat top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound ready locomotives also feature: Operate using DC DCC ready with Nano E24 connector

Innovation! Delivery May 2027

• Ready for use with DCC (DCC interface)

All-new model Era: 2007 to 2014 Series 7670 to 7719; built 09/07-02/08 Fully-assembled Multiple road numbers LED-illuminated front and rear deck-mounted alternating ditch lights** Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to front anticlimber supports Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber and support brackets GE “nub” pattern walkway tread Early handrails with wrap-over stanchion heads, left long rail for no capacitor box, and right long rail with bolted head on 2nd lower stanchion Wide profile end handrails Sand box clean out door with knuckle buster latch and hinge Front high (cab) mounted headlight Left nose door with window Front high-mounted (cab) numberboard housings Left side under cab front access bolted X panel; rear door with square corrugated grille Early cab with 3 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted under rear sliding window on engineer side Cab roof GE communications handler octagonal dome, and GE I-Service communication system round dome antenna with conduit Dual-hinged and latched cabinet doors with barrel bolt latches Left side dynamic brake cab: front blower, bolted X panel, and rear blower dynamic brake with flush exhaust Right side dynamic brake cab: door with grille and latches forward, small flat panel, bolted on X-panel, door with grille and latches forward Dynamic brake cab door with low door handle and low-mounted door handle bumper Short right side air intake grille Left side auxiliary cab: 3 medium doors with latches on #2 door and short auxiliary cab filter box door Right side auxiliary cab: 4 doors with latches on #1 and #4 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles – tall-short-tall-tall-tall, short front angled grill, two-piece rear angled grille, no grille under brake wheel Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, tall, tall, tall, short, tall, short front angled grill, two-piece rear angled grille Angled water fill box High-mounted vertical rear headlight Rear anticlimber with support brackets Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with unused electric parking brake mounting brackets on right front side frame and separately applied brake cylinders, air plumbing Square handbrake chain bracket Toilet drain with exterior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Flat top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound ready locomotives also feature: Operate using DC DCC ready with Nano E24 connector

Innovation! Delivery May 2027

• Ready for use with DCC (DCC interface)

All-new model Era: 2007 to 2014 Series 7670 to 7719; built 09/07-02/08 Fully-assembled Multiple road numbers LED-illuminated front and rear deck-mounted alternating ditch lights** Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to front anticlimber supports Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber and support brackets GE “nub” pattern walkway tread Early handrails with wrap-over stanchion heads, left long rail for no capacitor box, and right long rail with bolted head on 2nd lower stanchion Wide profile end handrails Sand box clean out door with knuckle buster latch and hinge Front high (cab) mounted headlight Left nose door with window Front high-mounted (cab) numberboard housings Left side under cab front access bolted X panel; rear door with square corrugated grille Early cab with 3 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted under rear sliding window on engineer side Cab roof GE communications handler octagonal dome, and GE I-Service communication system round dome antenna with conduit Dual-hinged and latched cabinet doors with barrel bolt latches Left side dynamic brake cab: front blower, bolted X panel, and rear blower dynamic brake with flush exhaust Right side dynamic brake cab: door with grille and latches forward, small flat panel, bolted on X-panel, door with grille and latches forward Dynamic brake cab door with low door handle and low-mounted door handle bumper Short right side air intake grille Left side auxiliary cab: 3 medium doors with latches on #2 door and short auxiliary cab filter box door Right side auxiliary cab: 4 doors with latches on #1 and #4 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles – tall-short-tall-tall-tall, short front angled grill, two-piece rear angled grille, no grille under brake wheel Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, tall, tall, tall, short, tall, short front angled grill, two-piece rear angled grille Angled water fill box High-mounted vertical rear headlight Rear anticlimber with support brackets Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with unused electric parking brake mounting brackets on right front side frame and separately applied brake cylinders, air plumbing Square handbrake chain bracket Toilet drain with exterior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Flat top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound ready locomotives also feature: Operate using DC DCC ready with Nano E24 connector

Innovation! Delivery May 2027

• prepared for DCC wiring
• with Sound

All-new model Era: 2007 to 2014 Series 7670 to 7719; built 09/07-02/08 Fully-assembled Multiple road numbers LED-illuminated front and rear deck-mounted alternating ditch lights** Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to front anticlimber supports Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber and support brackets GE “nub” pattern walkway tread Early handrails with wrap-over stanchion heads, left long rail for no capacitor box, and right long rail with bolted head on 2nd lower stanchion Wide profile end handrails Sand box clean out door with knuckle buster latch and hinge Front high (cab) mounted headlight Left nose door with window Front high-mounted (cab) numberboard housings Left side under cab front access bolted X panel; rear door with square corrugated grille Early cab with 3 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted under rear sliding window on engineer side Cab roof GE communications handler octagonal dome, and GE I-Service communication system round dome antenna with conduit Dual-hinged and latched cabinet doors with barrel bolt latches Left side dynamic brake cab: front blower, bolted X panel, and rear blower dynamic brake with flush exhaust Right side dynamic brake cab: door with grille and latches forward, small flat panel, bolted on X-panel, door with grille and latches forward Dynamic brake cab door with low door handle and low-mounted door handle bumper Short right side air intake grille Left side auxiliary cab: 3 medium doors with latches on #2 door and short auxiliary cab filter box door Right side auxiliary cab: 4 doors with latches on #1 and #4 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles – tall-short-tall-tall-tall, short front angled grill, two-piece rear angled grille, no grille under brake wheel Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, tall, tall, tall, short, tall, short front angled grill, two-piece rear angled grille Angled water fill box High-mounted vertical rear headlight Rear anticlimber with support brackets Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with unused electric parking brake mounting brackets on right front side frame and separately applied brake cylinders, air plumbing Square handbrake chain bracket Toilet drain with exterior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Flat top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Cube-type speaker Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

Innovation! Delivery May 2027

• prepared for DCC wiring
• with Sound

All-new model Era: 2007 to 2014 Series 7670 to 7719; built 09/07-02/08 Fully-assembled Multiple road numbers LED-illuminated front and rear deck-mounted alternating ditch lights** Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to front anticlimber supports Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber and support brackets GE “nub” pattern walkway tread Early handrails with wrap-over stanchion heads, left long rail for no capacitor box, and right long rail with bolted head on 2nd lower stanchion Wide profile end handrails Sand box clean out door with knuckle buster latch and hinge Front high (cab) mounted headlight Left nose door with window Front high-mounted (cab) numberboard housings Left side under cab front access bolted X panel; rear door with square corrugated grille Early cab with 3 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted under rear sliding window on engineer side Cab roof GE communications handler octagonal dome, and GE I-Service communication system round dome antenna with conduit Dual-hinged and latched cabinet doors with barrel bolt latches Left side dynamic brake cab: front blower, bolted X panel, and rear blower dynamic brake with flush exhaust Right side dynamic brake cab: door with grille and latches forward, small flat panel, bolted on X-panel, door with grille and latches forward Dynamic brake cab door with low door handle and low-mounted door handle bumper Short right side air intake grille Left side auxiliary cab: 3 medium doors with latches on #2 door and short auxiliary cab filter box door Right side auxiliary cab: 4 doors with latches on #1 and #4 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles – tall-short-tall-tall-tall, short front angled grill, two-piece rear angled grille, no grille under brake wheel Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, tall, tall, tall, short, tall, short front angled grill, two-piece rear angled grille Angled water fill box High-mounted vertical rear headlight Rear anticlimber with support brackets Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with unused electric parking brake mounting brackets on right front side frame and separately applied brake cylinders, air plumbing Square handbrake chain bracket Toilet drain with exterior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Flat top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Cube-type speaker Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

Innovation! Delivery May 2027

• prepared for DCC wiring
• with Sound

All-new model Era: 2007 to 2014 Series 7670 to 7719; built 09/07-02/08 Fully-assembled Multiple road numbers LED-illuminated front and rear deck-mounted alternating ditch lights** Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to front anticlimber supports Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber and support brackets GE “nub” pattern walkway tread Early handrails with wrap-over stanchion heads, left long rail for no capacitor box, and right long rail with bolted head on 2nd lower stanchion Wide profile end handrails Sand box clean out door with knuckle buster latch and hinge Front high (cab) mounted headlight Left nose door with window Front high-mounted (cab) numberboard housings Left side under cab front access bolted X panel; rear door with square corrugated grille Early cab with 3 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted under rear sliding window on engineer side Cab roof GE communications handler octagonal dome, and GE I-Service communication system round dome antenna with conduit Dual-hinged and latched cabinet doors with barrel bolt latches Left side dynamic brake cab: front blower, bolted X panel, and rear blower dynamic brake with flush exhaust Right side dynamic brake cab: door with grille and latches forward, small flat panel, bolted on X-panel, door with grille and latches forward Dynamic brake cab door with low door handle and low-mounted door handle bumper Short right side air intake grille Left side auxiliary cab: 3 medium doors with latches on #2 door and short auxiliary cab filter box door Right side auxiliary cab: 4 doors with latches on #1 and #4 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles – tall-short-tall-tall-tall, short front angled grill, two-piece rear angled grille, no grille under brake wheel Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, tall, tall, tall, short, tall, short front angled grill, two-piece rear angled grille Angled water fill box High-mounted vertical rear headlight Rear anticlimber with support brackets Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with unused electric parking brake mounting brackets on right front side frame and separately applied brake cylinders, air plumbing Square handbrake chain bracket Toilet drain with exterior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Flat top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Cube-type speaker Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

Innovation! Delivery May 2027

• prepared for DCC wiring
• with Sound

All-new model Era: 2014 to present Series 7600 to 7799; built 01-09/07 Fully-assembled Multiple road numbers LED-illuminated front deck-mounted ditch lights Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to front anticlimber supports Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber and support brackets GE “nub” pattern walkway tread Early handrails with wrap-over stanchion heads, left long rail for capacitor box clearance, and right long rail with bolted head on 2nd lower stanchion Sand box clean out door with handle and rotating hinge Front nose headlight Front straight grab irons mounted directly to the nose Left nose door without window Front high-mounted (cab) numberboard housings Dual cab side blue flag holder Left side under cab front access bolted panel; rear door with square corrugated grille Early cab with 3 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted under rear sliding window on engineer side Cab roof with UP-specific PTC antenna farm with JEM-manufactured cabinets Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Left side dynamic brake cab: late single blower dynamic brake package with dual stand-off exhaust, two small center grilles, and latched center door Right side dynamic brake cab: X panel door, small grille, door with grille, and X panel door Dynamic brake cab door with low door handle and low-mounted door handle bumper Short right side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door with X panel in front Capacitor box on left side walkway Right side auxiliary cab: 4 doors with latches on #1 and #4 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles – tall-short-tall-tall-tall, short front angled grill, two-piece rear angled grille, no grille under brake wheel Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, tall, tall, tall, short, tall, short front angled grill, two-piece rear angled grille Angled water fill box High-mounted vertical rear headlight Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with separately applied brake cylinders, dual bracket air plumbing, and smooth section in sideframe over center axle Square handbrake chain bracket Toilet drain with interior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Angled top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Cube-type speaker Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

Innovation! Delivery May 2027

• Ready for use with DCC (DCC interface)

All-new model Era: 2014 to present Series 7600 to 7799; built 01-09/07 Fully-assembled Multiple road numbers LED-illuminated front deck-mounted ditch lights Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to front anticlimber supports Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber and support brackets GE “nub” pattern walkway tread Early handrails with wrap-over stanchion heads, left long rail for capacitor box clearance, and right long rail with bolted head on 2nd lower stanchion Sand box clean out door with handle and rotating hinge Front nose headlight Front straight grab irons mounted directly to the nose Left nose door without window Front high-mounted (cab) numberboard housings Dual cab side blue flag holder Left side under cab front access bolted panel; rear door with square corrugated grille Early cab with 3 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted under rear sliding window on engineer side Cab roof with UP-specific PTC antenna farm with JEM-manufactured cabinets Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Left side dynamic brake cab: late single blower dynamic brake package with dual stand-off exhaust, two small center grilles, and latched center door Right side dynamic brake cab: X panel door, small grille, door with grille, and X panel door Dynamic brake cab door with low door handle and low-mounted door handle bumper Short right side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door with X panel in front Capacitor box on left side walkway Right side auxiliary cab: 4 doors with latches on #1 and #4 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles – tall-short-tall-tall-tall, short front angled grill, two-piece rear angled grille, no grille under brake wheel Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, tall, tall, tall, short, tall, short front angled grill, two-piece rear angled grille Angled water fill box High-mounted vertical rear headlight Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with separately applied brake cylinders, dual bracket air plumbing, and smooth section in sideframe over center axle Square handbrake chain bracket Toilet drain with interior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Angled top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound ready locomotives also feature: Operate using DC DCC ready with Nano E24 connector

Innovation! Delivery May 2027

• Ready for use with DCC (DCC interface)

All-new model Era: 2014 to present Series 7600 to 7799; built 01-09/07 Fully-assembled Multiple road numbers LED-illuminated front deck-mounted ditch lights Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to front anticlimber supports Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber and support brackets GE “nub” pattern walkway tread Early handrails with wrap-over stanchion heads, left long rail for capacitor box clearance, and right long rail with bolted head on 2nd lower stanchion Sand box clean out door with handle and rotating hinge Front nose headlight Front straight grab irons mounted directly to the nose Left nose door without window Front high-mounted (cab) numberboard housings Dual cab side blue flag holder Left side under cab front access bolted panel; rear door with square corrugated grille Early cab with 3 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted under rear sliding window on engineer side Cab roof with UP-specific PTC antenna farm with JEM-manufactured cabinets Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Left side dynamic brake cab: late single blower dynamic brake package with dual stand-off exhaust, two small center grilles, and latched center door Right side dynamic brake cab: X panel door, small grille, door with grille, and X panel door Dynamic brake cab door with low door handle and low-mounted door handle bumper Short right side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door with X panel in front Capacitor box on left side walkway Right side auxiliary cab: 4 doors with latches on #1 and #4 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles – tall-short-tall-tall-tall, short front angled grill, two-piece rear angled grille, no grille under brake wheel Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, tall, tall, tall, short, tall, short front angled grill, two-piece rear angled grille Angled water fill box High-mounted vertical rear headlight Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with separately applied brake cylinders, dual bracket air plumbing, and smooth section in sideframe over center axle Square handbrake chain bracket Toilet drain with interior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Angled top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound ready locomotives also feature: Operate using DC DCC ready with Nano E24 connector

Innovation! Delivery May 2027

• Ready for use with DCC (DCC interface)

All-new model Era: 2014 to present Series 7600 to 7799; built 01-09/07 Fully-assembled Multiple road numbers LED-illuminated front deck-mounted ditch lights Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to front anticlimber supports Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber and support brackets GE “nub” pattern walkway tread Early handrails with wrap-over stanchion heads, left long rail for capacitor box clearance, and right long rail with bolted head on 2nd lower stanchion Sand box clean out door with handle and rotating hinge Front nose headlight Front straight grab irons mounted directly to the nose Left nose door without window Front high-mounted (cab) numberboard housings Dual cab side blue flag holder Left side under cab front access bolted panel; rear door with square corrugated grille Early cab with 3 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted under rear sliding window on engineer side Cab roof with UP-specific PTC antenna farm with JEM-manufactured cabinets Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Left side dynamic brake cab: late single blower dynamic brake package with dual stand-off exhaust, two small center grilles, and latched center door Right side dynamic brake cab: X panel door, small grille, door with grille, and X panel door Dynamic brake cab door with low door handle and low-mounted door handle bumper Short right side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door with X panel in front Capacitor box on left side walkway Right side auxiliary cab: 4 doors with latches on #1 and #4 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles – tall-short-tall-tall-tall, short front angled grill, two-piece rear angled grille, no grille under brake wheel Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, tall, tall, tall, short, tall, short front angled grill, two-piece rear angled grille Angled water fill box High-mounted vertical rear headlight Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with separately applied brake cylinders, dual bracket air plumbing, and smooth section in sideframe over center axle Square handbrake chain bracket Toilet drain with interior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Angled top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound ready locomotives also feature: Operate using DC DCC ready with Nano E24 connector

Innovation! Delivery May 2027

• Ready for use with DCC (DCC interface)

All-new model Era: 2014 to present Series 7600 to 7799; built 01-09/07 Fully-assembled Multiple road numbers LED-illuminated front deck-mounted ditch lights Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to front anticlimber supports Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber and support brackets GE “nub” pattern walkway tread Early handrails with wrap-over stanchion heads, left long rail for capacitor box clearance, and right long rail with bolted head on 2nd lower stanchion Sand box clean out door with handle and rotating hinge Front nose headlight Front straight grab irons mounted directly to the nose Left nose door without window Front high-mounted (cab) numberboard housings Dual cab side blue flag holder Left side under cab front access bolted panel; rear door with square corrugated grille Early cab with 3 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted under rear sliding window on engineer side Cab roof with UP-specific PTC antenna farm with JEM-manufactured cabinets Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Left side dynamic brake cab: late single blower dynamic brake package with dual stand-off exhaust, two small center grilles, and latched center door Right side dynamic brake cab: X panel door, small grille, door with grille, and X panel door Dynamic brake cab door with low door handle and low-mounted door handle bumper Short right side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door with X panel in front Capacitor box on left side walkway Right side auxiliary cab: 4 doors with latches on #1 and #4 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles – tall-short-tall-tall-tall, short front angled grill, two-piece rear angled grille, no grille under brake wheel Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, tall, tall, tall, short, tall, short front angled grill, two-piece rear angled grille Angled water fill box High-mounted vertical rear headlight Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with separately applied brake cylinders, dual bracket air plumbing, and smooth section in sideframe over center axle Square handbrake chain bracket Toilet drain with interior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Angled top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound ready locomotives also feature: Operate using DC DCC ready with Nano E24 connector

Innovation! Delivery May 2027

• prepared for DCC wiring
• with Sound

All-new model Era: 2014 to present Series 7600 to 7799; built 01-09/07 Fully-assembled Multiple road numbers LED-illuminated front deck-mounted ditch lights Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to front anticlimber supports Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber and support brackets GE “nub” pattern walkway tread Early handrails with wrap-over stanchion heads, left long rail for capacitor box clearance, and right long rail with bolted head on 2nd lower stanchion Sand box clean out door with handle and rotating hinge Front nose headlight Front straight grab irons mounted directly to the nose Left nose door without window Front high-mounted (cab) numberboard housings Dual cab side blue flag holder Left side under cab front access bolted panel; rear door with square corrugated grille Early cab with 3 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted under rear sliding window on engineer side Cab roof with UP-specific PTC antenna farm with JEM-manufactured cabinets Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Left side dynamic brake cab: late single blower dynamic brake package with dual stand-off exhaust, two small center grilles, and latched center door Right side dynamic brake cab: X panel door, small grille, door with grille, and X panel door Dynamic brake cab door with low door handle and low-mounted door handle bumper Short right side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door with X panel in front Capacitor box on left side walkway Right side auxiliary cab: 4 doors with latches on #1 and #4 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles – tall-short-tall-tall-tall, short front angled grill, two-piece rear angled grille, no grille under brake wheel Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, tall, tall, tall, short, tall, short front angled grill, two-piece rear angled grille Angled water fill box High-mounted vertical rear headlight Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with separately applied brake cylinders, dual bracket air plumbing, and smooth section in sideframe over center axle Square handbrake chain bracket Toilet drain with interior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Angled top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Cube-type speaker Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

Innovation! Delivery May 2027

• prepared for DCC wiring
• with Sound

All-new model Era: 2014 to present Series 7600 to 7799; built 01-09/07 Fully-assembled Multiple road numbers LED-illuminated front deck-mounted ditch lights Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to front anticlimber supports Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber and support brackets GE “nub” pattern walkway tread Early handrails with wrap-over stanchion heads, left long rail for capacitor box clearance, and right long rail with bolted head on 2nd lower stanchion Sand box clean out door with handle and rotating hinge Front nose headlight Front straight grab irons mounted directly to the nose Left nose door without window Front high-mounted (cab) numberboard housings Dual cab side blue flag holder Left side under cab front access bolted panel; rear door with square corrugated grille Early cab with 3 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted under rear sliding window on engineer side Cab roof with UP-specific PTC antenna farm with JEM-manufactured cabinets Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Left side dynamic brake cab: late single blower dynamic brake package with dual stand-off exhaust, two small center grilles, and latched center door Right side dynamic brake cab: X panel door, small grille, door with grille, and X panel door Dynamic brake cab door with low door handle and low-mounted door handle bumper Short right side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door with X panel in front Capacitor box on left side walkway Right side auxiliary cab: 4 doors with latches on #1 and #4 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles – tall-short-tall-tall-tall, short front angled grill, two-piece rear angled grille, no grille under brake wheel Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, tall, tall, tall, short, tall, short front angled grill, two-piece rear angled grille Angled water fill box High-mounted vertical rear headlight Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with separately applied brake cylinders, dual bracket air plumbing, and smooth section in sideframe over center axle Square handbrake chain bracket Toilet drain with interior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Angled top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Cube-type speaker Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

Innovation! Delivery May 2027

• prepared for DCC wiring
• with Sound

All-new model Era: 2014 to present Series 7600 to 7799; built 01-09/07 Fully-assembled Multiple road numbers LED-illuminated front deck-mounted ditch lights Directional LED headlights Printed and LED lighted number boards* Body-mounted knuckle couplers; Micro-Trains® compatible, molded in a dingy gray/brown color to represent the color of couplers in service Inside loop uncoupling levers with up-down brackets Single trainline hose with silver gladhand Dual front dummy Multiple Unit (MU) receptacles mounted to front anticlimber supports Front raised and rear flush pilot-mounted Multiple Unit (MU) receptacles Walkway with front anticlimber and support brackets GE “nub” pattern walkway tread Early handrails with wrap-over stanchion heads, left long rail for capacitor box clearance, and right long rail with bolted head on 2nd lower stanchion Sand box clean out door with handle and rotating hinge Front nose headlight Front straight grab irons mounted directly to the nose Left nose door without window Front high-mounted (cab) numberboard housings Dual cab side blue flag holder Left side under cab front access bolted panel; rear door with square corrugated grille Early cab with 3 side windows Detailed cab interior Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides Switching mirror mounted under rear sliding window on engineer side Cab roof with UP-specific PTC antenna farm with JEM-manufactured cabinets Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Left side dynamic brake cab: late single blower dynamic brake package with dual stand-off exhaust, two small center grilles, and latched center door Right side dynamic brake cab: X panel door, small grille, door with grille, and X panel door Dynamic brake cab door with low door handle and low-mounted door handle bumper Short right side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door with X panel in front Capacitor box on left side walkway Right side auxiliary cab: 4 doors with latches on #1 and #4 doors ES44 style engine cab doors: latched first door in each set of three Nathan AirChime K5HL horn mounted on engine cab roof ES44 style exhaust stack Left side exhaust cab doors: latched last door in set of three Flush heat exchanger housing with two-piece wide slot grille Late raised radiator grille Left side radiator cab grille arrangement: Raised doors. Grilles – tall-short-tall-tall-tall, short front angled grill, two-piece rear angled grille, no grille under brake wheel Right side radiator cab grille arrangement: Raised doors. Grilles – tall, short, tall, tall, tall, tall, short, tall, short front angled grill, two-piece rear angled grille Angled water fill box High-mounted vertical rear headlight Rear wide-spaced dual dummy Multiple Unit (MU) receptacles Accurately profiled frame with separately applied plumbing and cabling GE Hi-Ad trucks with separately applied brake cylinders, dual bracket air plumbing, and smooth section in sideframe over center axle Square handbrake chain bracket Toilet drain with interior handle Dual Graham-White (Prime) finned 075 air filters Graham-White 994-500 air dryer 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge Dual fuel fills per side with rear fill “blanked” Angled top left side fuel tank top box Digital fuel gauges Short crankcase drainpipe Factory-applied wire grab irons, snowplow with molded grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank-mounted bell, brake wheel, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Printing and lettering legible under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11” DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder with “Full Throttle” Cube-type speaker Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more Operates on both DC and DCC layouts

• with Sound

BNSF/Roofline Icicles/Patched/Late Thermo King HVAC New road numbers Era: 2001 to 2006 Series 793000 to 793266, built starting in January 2001 Fully-assembled Multiple road numbers 82’ 7883 cubic foot smooth side body 12’ plug door with recessed top section and molded door rods and door handle Carrier HVAC unit Cylindrical Refrigeration unit fuel tank Intricate A end refrigeration unit access platform with photo-etched metal platform deck with early curved style handrail Fuel tank end cage with separate plastic frame and wire grabirons Smooth roof Underbody brake rigging and components located specifically to match the 7883 cubic foot car Factory-applied ladders, metal grab irons, coupler cut levers, and trainline hoses with silver gladhands Brake wheel, stand, and chain Brake plumbing with separate air reservoir, control valve, and retainer valve plus separately applied wireform plumbing including trainline pipe with brackets Photo-etched stainless-steel see-through Morton (stamped round hole) coupler crossover platform on B end of car ASF Ride Control trucks with finely rendered raised foundry data 36” machined metal wheels Body-mounted semi-scale standard Type E knuckle couplers – Micro-Trains® compatible Printing and lettering legible even under magnification Weighted to Industry standards for reliable operation Operates on Code 55 and 80 rail Clear jewel box packaging safely stores model Minimum radius: 10” Recommended radius: 11” Sound equipped versions feature: Track powered, capacitor circuit Sounds adjust by switches on the bottom of the car

• with Sound

BNSF/Roofline Icicles/Patched/Late Thermo King HVAC New road numbers Era: 2001 to 2006 Series 793000 to 793266, built starting in January 2001 Fully-assembled Multiple road numbers 82’ 7883 cubic foot smooth side body 12’ plug door with recessed top section and molded door rods and door handle Carrier HVAC unit Cylindrical Refrigeration unit fuel tank Intricate A end refrigeration unit access platform with photo-etched metal platform deck with early curved style handrail Fuel tank end cage with separate plastic frame and wire grabirons Smooth roof Underbody brake rigging and components located specifically to match the 7883 cubic foot car Factory-applied ladders, metal grab irons, coupler cut levers, and trainline hoses with silver gladhands Brake wheel, stand, and chain Brake plumbing with separate air reservoir, control valve, and retainer valve plus separately applied wireform plumbing including trainline pipe with brackets Photo-etched stainless-steel see-through Morton (stamped round hole) coupler crossover platform on B end of car ASF Ride Control trucks with finely rendered raised foundry data 36” machined metal wheels Body-mounted semi-scale standard Type E knuckle couplers – Micro-Trains® compatible Printing and lettering legible even under magnification Weighted to Industry standards for reliable operation Operates on Code 55 and 80 rail Clear jewel box packaging safely stores model Minimum radius: 10” Recommended radius: 11” Sound equipped versions feature: Track powered, capacitor circuit Sounds adjust by switches on the bottom of the car

• with Sound

BNSF/Roofline Icicles/Patched/Late Thermo King HVAC New road numbers Era: 2001 to 2006 Series 793000 to 793266, built starting in January 2001 Fully-assembled Multiple road numbers 82’ 7883 cubic foot smooth side body 12’ plug door with recessed top section and molded door rods and door handle Carrier HVAC unit Cylindrical Refrigeration unit fuel tank Intricate A end refrigeration unit access platform with photo-etched metal platform deck with early curved style handrail Fuel tank end cage with separate plastic frame and wire grabirons Smooth roof Underbody brake rigging and components located specifically to match the 7883 cubic foot car Factory-applied ladders, metal grab irons, coupler cut levers, and trainline hoses with silver gladhands Brake wheel, stand, and chain Brake plumbing with separate air reservoir, control valve, and retainer valve plus separately applied wireform plumbing including trainline pipe with brackets Photo-etched stainless-steel see-through Morton (stamped round hole) coupler crossover platform on B end of car ASF Ride Control trucks with finely rendered raised foundry data 36” machined metal wheels Body-mounted semi-scale standard Type E knuckle couplers – Micro-Trains® compatible Printing and lettering legible even under magnification Weighted to Industry standards for reliable operation Operates on Code 55 and 80 rail Clear jewel box packaging safely stores model Minimum radius: 10” Recommended radius: 11” Sound equipped versions feature: Track powered, capacitor circuit Sounds adjust by switches on the bottom of the car