• with DCC Decoder
• with Sound

All-new model Era: 2017 to present Series 599 to 619; ex-ATSF C44-9W 600 to 619 and 666, built 2-3/1994 and 9/1994 Road number 601; ex-ATSF 601 Flat-stamped brake wheel Lost-wax brass cast Nathan AirChime K3LAR2 horn mounted on engine cab with right mounted #1 bell Short and wide plow with no doors, flanged coupler opening and curved polygonal corners Dual Linkup International antenna cabinets and center-mounted antenna dome PTC array Road number 605; ex-ATSF 605 Convex stamped brake wheel Lost-wax brass cast Nathan AirChime K3LAR2 horn mounted on engine cab with right mounted #1 bell Short and wide plow with no doors, flanged coupler opening and notched corners STI-CO dual track antennas and center-mounted antenna dome PTC array Road number 608; ex-ATSF 608 Flat-stamped brake wheel Lost-wax brass cast Nathan AirChime K3LAR2 horn mounted on engine cab with center mounted #1 bell and right mounted #2 bell Short and wide plow with no doors, flanged coupler opening and notched corners STI-CO dual track antennas and center-mounted antenna dome PTC array Road number 610; ex-ATSF 610 Flat-stamped brake wheel Lost-wax brass cast Nathan AirChime K3LAR2 horn mounted on engine cab with left mounted #1 bell Short and wide plow with no doors, flanged coupler opening and notched corners Dual Linkup International antenna cabinets and center-mounted antenna dome PTC array Road number 617; ex-ATSF 617 Flat-stamped brake wheel Lost-wax brass cast Nathan AirChime K3LAR2 horn mounted on engine cab with center mounted #1 bell and left mounted #2 bell Short and wide plow with no doors, flanged coupler opening and notched corners Dual Linkup International antenna cabinets and center-mounted antenna dome PTC array Road number 619; ex-ATSF 619 Flat-stamped brake wheel Lost-wax brass cast Nathan AirChime K5HLR245 horn mounted on engine cab Short and wide plow with no doors, flanged coupler opening and notched corners STI-CO dual track antennas and center-mounted antenna dome PTC array Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated front deck-mounted ditch lights** Operating LED-illuminated front, rear, and side walkway lights* Printed high-mount cab number boards with separately controlled backlit LED-illumination* Directional LED-illuminated headlights Semi-scale GE type coupler buffer equipped with durable metal semi-scale Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Inside loop uncoupling levers with down brackets 4-step stepwells with see-through steps Early - Tapered stepwell corner profile Walkway with front anticlimbers GE “nub” pattern walkway tread Wide profile end handrails Front low (cab) mounted headlight Left side nose door with window; security padlock with hasp One-piece nose top grab irons Right side cab under floor access doors: 17 louver panels per door and circular style latches Left side cab under floor access doors: bolted X-panel with square punched screen HVAC unit Late - Rearward placed cab heater vent Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation In-cab grade crossing camera Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Inverter Cabinet with Bolted and hinged access door, top two X panels same size, three lower X panels with 4 - 6 - 4 Bolt Pattern Continuous reinforcement rib under dynamic brake intake grilles High-capacity dynamic brake exhaust (2-port) Rearward right-side air intake grille Left side auxiliary cab: 3 short doors with latches on the #2 door and narrow auxiliary cab filter box door Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Dual lifting lugs mounted to sides of clean air cab joint Early (round) engine cab roof profile Early (thin handle) engine compartment door latches Low-mounted lift rings on engine cab power assembly doors Three door latches per side on exhaust cab doors Early flanged exhaust stack housing 26 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Right side late radiator door grilles in even heights Left rear hood door grille arrangement: short, short, short grilles High-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling “C4” A-1-A trucks with idler center axle Wheel faces painted a dingy gray/brown color to represent the color of wheelset in service No speed recorder Graham-White 975-100 series air dryer Dual Graham-White (Salem) 824 air filters 5,000-gallon fuel tank with vertical weld seam Single fuel fills per side Round and vertical analog fuel gauges; digital fuel gauges Fuel tank-mounted steel bell Curved handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive and electrical pick-up Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores the model Minimum Radius: 18” Recommended Radius: 22” DCC & sound equipped locomotives also feature: ESU LokSound™ 5 DCC and Sound decoder with “Full Throttle” Functions Two (2) cube-type speakers Accurate FDL-16 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super-capacitors*** Operates on both DC and DCC layouts

Innovation! Delivery February 2027

• Ready for use with DCC (DCC interface)

New road numbers Era: 2023 to present Series 3650 to 3674; built 6-8/2023 Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights** Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank-mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22 DCC & sound ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector

Innovation! Delivery February 2027

• Ready for use with DCC (DCC interface)

New road numbers Era: 2023 to present Series 3650 to 3674; built 6-8/2023 Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights** Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank-mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22 DCC & sound ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector

Innovation! Delivery February 2027

• Ready for use with DCC (DCC interface)

New road numbers Era: 2023 to present Series 3650 to 3674; built 6-8/2023 Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights** Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank-mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22 DCC & sound ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector

Innovation! Delivery February 2027

• with DCC Decoder
• with Sound

New road numbers Era: 2023 to present Series 3650 to 3674; built 6-8/2023 Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights** Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank-mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22 DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Innovation! Delivery February 2027

• with DCC Decoder
• with Sound

New road numbers Era: 2023 to present Series 3650 to 3674; built 6-8/2023 Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights** Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank-mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22 DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Innovation! Delivery February 2027

• with DCC Decoder
• with Sound

New road numbers Era: 2023 to present Series 3650 to 3674; built 6-8/2023 Fully-assembled Multiple road numbers Prototype BNSF ET44s do not have ground lights Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted ditch lights** Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: X panel front and dual blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: X panel door, small grille, door with grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual standard fuel fills per side Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank-mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22 DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Innovation! Delivery February 2027

• with DCC Decoder
• with Sound

New road numbers Era: 2025 to present Series 7450 to 7619; built 4/25 to present (currently in production) Road number 7470 Special logos honor the Lord Strathcona’s Horse (Royal Canadians), a regiment raised in 1900 by Lord Strathcona, who also famously drove the last spike for the Canadian Pacific Railway. Fully-assembled Multiple road numbers Operating LED ground lights on both sides of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front and rear deck-mounted ditch lights** Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale lower shelf Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: door with grille, door with grille, small grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service AEI tag mounted on bracket below the right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side, rear is Spillx fuel fill Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank-mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22' DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Innovation! Delivery February 2027

• Ready for use with DCC (DCC interface)

New road numbers Era: 2025 to present Series 7450 to 7619; built 4/25 to present (currently in production) Road number 7470 Special logos honor the Lord Strathcona’s Horse (Royal Canadians), a regiment raised in 1900 by Lord Strathcona, who also famously drove the last spike for the Canadian Pacific Railway. Fully-assembled Multiple road numbers Operating LED ground lights on both sides of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front and rear deck-mounted ditch lights** Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale lower shelf Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: door with grille, door with grille, small grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service AEI tag mounted on bracket below the right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side, rear is Spillx fuel fill Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank-mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22' DCC & sound ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector

Innovation! Delivery February 2027

• Ready for use with DCC (DCC interface)

New road numbers Era: 2025 to present Series 7450 to 7619; built 4/25 to present (currently in production) Fully-assembled Multiple road numbers Operating LED ground lights on both sides of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front and rear deck-mounted ditch lights** Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale lower shelf Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: door with grille, door with grille, small grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service AEI tag mounted on bracket below the right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side, rear is Spillx fuel fill Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank-mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22' DCC & sound ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector

Innovation! Delivery February 2027

• Ready for use with DCC (DCC interface)

New road numbers Era: 2025 to present Series 7450 to 7619; built 4/25 to present (currently in production) Fully-assembled Multiple road numbers Operating LED ground lights on both sides of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front and rear deck-mounted ditch lights** Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale lower shelf Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: door with grille, door with grille, small grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service AEI tag mounted on bracket below the right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side, rear is Spillx fuel fill Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank-mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22' DCC & sound ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector

Innovation! Delivery February 2027

• Ready for use with DCC (DCC interface)

New road numbers Era: 2025 to present Series 7450 to 7619; built 4/25 to present (currently in production) Fully-assembled Multiple road numbers Operating LED ground lights on both sides of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front and rear deck-mounted ditch lights** Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale lower shelf Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: door with grille, door with grille, small grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service AEI tag mounted on bracket below the right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side, rear is Spillx fuel fill Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank-mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22' DCC & sound ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector

Innovation! Delivery February 2027

• with DCC Decoder
• with Sound

New road numbers Era: 2025 to present Series 7450 to 7619; built 4/25 to present (currently in production) Fully-assembled Multiple road numbers Operating LED ground lights on both sides of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front and rear deck-mounted ditch lights** Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale lower shelf Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: door with grille, door with grille, small grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service AEI tag mounted on bracket below the right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side, rear is Spillx fuel fill Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank-mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22' DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Innovation! Delivery February 2027

• with DCC Decoder
• with Sound

New road numbers Era: 2025 to present Series 7450 to 7619; built 4/25 to present (currently in production) Fully-assembled Multiple road numbers Operating LED ground lights on both sides of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front and rear deck-mounted ditch lights** Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale lower shelf Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: door with grille, door with grille, small grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service AEI tag mounted on bracket below the right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side, rear is Spillx fuel fill Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank-mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22' DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Innovation! Delivery February 2027

• with DCC Decoder
• with Sound

New road numbers Era: 2025 to present Series 7450 to 7619; built 4/25 to present (currently in production) Fully-assembled Multiple road numbers Operating LED ground lights on both sides of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front and rear deck-mounted ditch lights** Printed and LED lighted number boards* Semi-scale coupler buffers equipped with durable metal semi-scale lower shelf Type E knuckle couplers, painted a dingy gray/brown color to represent the color of couplers in service Multiple unit (MU) cable with attachment chain See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch Narrow profile end handrails Front nose headlight Nose door with window Cab without barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof JEM Communications PTC antenna farm with dual conduit between front and rear cabinets See-through dynamic brake exhaust Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: door with grille, door with grille, small grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Radiator grille hold downs with radiused corners and two tabs for rear two grilles Flat stamped brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service AEI tag mounted on bracket below the right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side, rear is Spillx fuel fill Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank-mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22' DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Innovation! Delivery February 2027

• with DCC Decoder
• with Sound

New road numbers Era: 2022 to Present Series 3375-3399, built 2016-2017 Road numbers 3377, 3384, and 3396 Added Distributed Power (DP) logos for 2022 to present era Fully-assembled Multiple road numbers Operating LED ground lights on both sides of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted alternating ditch lights** Printed and LED lighted number boards* LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Sill-mounted brake stick holder Sill-mounted tow chain Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers painted a dingy gray/brown color to represent the color of couplers in service Multiple unit (MU) cable with attachment chain Battery charging receptacles on front and rear pilots See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch and hinge Wide profile end handrails Front nose headlight Extra nose front grab iron on engineer’s side of cab Nose door with window Cab with barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof large square antenna dome, two long STI-CO PTC Dual Track Antenna System without Radome covers Grab on roof immediately behind cab roof See-through dynamic brake exhaust Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: door with grille, door with grille, small grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Standard radiator grille cover hold downs Raised center brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side with rear fill “blanked” Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank-mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22" DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Innovation! Delivery February 2027

• with DCC Decoder
• with Sound

New road numbers Era: 2022 to Present Series 3375-3399, built 2016-2017 Road numbers 3377, 3384, and 3396 Added Distributed Power (DP) logos for 2022 to present era Fully-assembled Multiple road numbers Operating LED ground lights on both sides of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted alternating ditch lights** Printed and LED lighted number boards* LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Sill-mounted brake stick holder Sill-mounted tow chain Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers painted a dingy gray/brown color to represent the color of couplers in service Multiple unit (MU) cable with attachment chain Battery charging receptacles on front and rear pilots See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch and hinge Wide profile end handrails Front nose headlight Extra nose front grab iron on engineer’s side of cab Nose door with window Cab with barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof large square antenna dome, two long STI-CO PTC Dual Track Antenna System without Radome covers Grab on roof immediately behind cab roof See-through dynamic brake exhaust Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: door with grille, door with grille, small grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Standard radiator grille cover hold downs Raised center brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side with rear fill “blanked” Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank-mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22" DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Innovation! Delivery February 2027

• with DCC Decoder
• with Sound

New road numbers Era: 2022 to Present Series 3375-3399, built 2016-2017 Road numbers 3377, 3384, and 3396 Added Distributed Power (DP) logos for 2022 to present era Fully-assembled Multiple road numbers Operating LED ground lights on both sides of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted alternating ditch lights** Printed and LED lighted number boards* LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Sill-mounted brake stick holder Sill-mounted tow chain Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers painted a dingy gray/brown color to represent the color of couplers in service Multiple unit (MU) cable with attachment chain Battery charging receptacles on front and rear pilots See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch and hinge Wide profile end handrails Front nose headlight Extra nose front grab iron on engineer’s side of cab Nose door with window Cab with barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof large square antenna dome, two long STI-CO PTC Dual Track Antenna System without Radome covers Grab on roof immediately behind cab roof See-through dynamic brake exhaust Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: door with grille, door with grille, small grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Standard radiator grille cover hold downs Raised center brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side with rear fill “blanked” Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank-mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22" DCC & sound equipped locomotives also feature: ESU-LokSound 5 DCC and Sound decoder Two (2) cube-type speakers Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more ESU-designed PowerPack with two (2) super capacitors*** Operates on both DC and DCC layouts

Innovation! Delivery February 2027

• Ready for use with DCC (DCC interface)

New road numbers Era: 2022 to Present Series 3375-3399, built 2016-2017 Road numbers 3377, 3384, and 3396 Added Distributed Power (DP) logos for 2022 to present era Fully-assembled Multiple road numbers Operating LED ground lights on both sides of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted alternating ditch lights** Printed and LED lighted number boards* LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Sill-mounted brake stick holder Sill-mounted tow chain Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers painted a dingy gray/brown color to represent the color of couplers in service Multiple unit (MU) cable with attachment chain Battery charging receptacles on front and rear pilots See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch and hinge Wide profile end handrails Front nose headlight Extra nose front grab iron on engineer’s side of cab Nose door with window Cab with barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof large square antenna dome, two long STI-CO PTC Dual Track Antenna System without Radome covers Grab on roof immediately behind cab roof See-through dynamic brake exhaust Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: door with grille, door with grille, small grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Standard radiator grille cover hold downs Raised center brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side with rear fill “blanked” Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank-mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22" DCC & sound ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector

Innovation! Delivery February 2027

• Ready for use with DCC (DCC interface)

New road numbers Era: 2022 to Present Series 3375-3399, built 2016-2017 Road numbers 3377, 3384, and 3396 Added Distributed Power (DP) logos for 2022 to present era Fully-assembled Multiple road numbers Operating LED ground lights on both sides of locomotive* Operating LED front, rear, and side walkway lights* Operating LED front deck-mounted alternating ditch lights** Printed and LED lighted number boards* LSL (Locomotive Speed Limiter) indicator lights on cab sides (non-operating) Sill-mounted brake stick holder Sill-mounted tow chain Semi-scale coupler buffers equipped with durable metal semi-scale standard Type E knuckle couplers painted a dingy gray/brown color to represent the color of couplers in service Multiple unit (MU) cable with attachment chain Battery charging receptacles on front and rear pilots See-through round-hole stepwell steps Walkway with front anticlimber GE “nub” pattern walkway tread Sand box clean out door with knuckle buster latch and hinge Wide profile end handrails Front nose headlight Extra nose front grab iron on engineer’s side of cab Nose door with window Cab with barrel bolt latches on subbase doors Detailed cab interior with separate floor, rear wall, seats, and control stand In cab grade crossing camera mounted on right side Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Cab roof large square antenna dome, two long STI-CO PTC Dual Track Antenna System without Radome covers Grab on roof immediately behind cab roof See-through dynamic brake exhaust Left side dynamic brake cab: tri blower dynamic brake with flush exhaust Etched metal see-through dynamic brake intake grilles with blower motors visible inside Right side dynamic brake cab: door with grille, door with grille, small grille, and door with grille Current production engine cab (long hood) with angled exhaust compartment roofline Lost wax brass cast Nathan AirChime K5HLR2 horn mounted on engine cab roof Separate exhaust stack 40 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Standard production radiator door grilles Standard radiator grille cover hold downs Raised center brake wheel Accurately profiled frame with separately applied plumbing and traction motor cabling GE Hi-Ad trucks with separately applied brake cylinders, air plumbing, and rotating bearing caps Wheel faces painted a dingy gray/brown color to represent the color of wheelsets in service AEI tag mounted on right sidesill 5,300 gallon fuel tank with external waste retention tank Dual fuel fills per side with rear fill “blanked” Factory-applied wire grab irons, snowplow with grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air dryer, air tanks, fuel tank-mounted electronic bell, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22" DCC & sound ready locomotives also feature: Operates on DC layouts DCC ready with 21-pin connector