Metallradsätze

• 與 DCC 解碼器
• 商品有聲音

Beleuchtung

Union Pacific, „Centipede” Öltender, u.a. für Lokomotiven der Reihe 4000 „Big Boy“

• 與DCC的使用（DCC接口）

New road numbers Era: 1997 through late 2011 ‘as delivered’ red sill stripes Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated front deck-mounted ditch lights** Operating LED-illuminated front, rear, and side walkway lights* Printed high-mount cab number boards with separately controlled backlit LED-illumination* Tall snowplow with open doors and two (2) grab irons Semi-scale coupler buffer equipped with durable metal semi-scale Type E lower-shelf knuckle couplers 5-step stepwells with see-through steps Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Front nose headlight Nose door without window Two-piece nose top grab irons Battery cabinet access door without latch GE safety cab with three (3) side windows Right side cab under floor access doors: dual large louver panels per door Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s desktop controls In-cab grade crossing camera Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Octagonal antenna dome; small square antenna dome Intermediate: four (4) square bolted panels and three (3) tall horizontal X-panels Continuous reinforcement rib under dynamic brake intake grilles Standard dynamic brake exhaust (2-port) Rearward right-side air intake grille Left side auxiliary cab: three (3) short doors with latches on the #2 door; auxiliary cab filter box door Capacitor box on left side walkway Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Late angled engine cab profile with tri-fold power assembly access doors Lost-wax brass cast Nathan AirChime K3LAR2 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, tall grilles Low-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Late Hi-Ad trucks with cantilever struts on right front and left rear sideframes Rotating axle bearing caps No speed recorder Dual Graham-White (Prime) 975-075 air filters Graham-White 994-500 series air dryer 5,000-gallon fuel tank with vertical weld seams Single fuel fills per side Vertical analog fuel gauges; “blanked” round gauges; and digital fuel gauges Fuel tank mounted steel bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Early square handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22”

• 與DCC的使用（DCC接口）

New road numbers Era: 1997 through late 2011 ‘as delivered’ red sill stripes Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated front deck-mounted ditch lights** Operating LED-illuminated front, rear, and side walkway lights* Printed high-mount cab number boards with separately controlled backlit LED-illumination* Tall snowplow with open doors and two (2) grab irons Semi-scale coupler buffer equipped with durable metal semi-scale Type E lower-shelf knuckle couplers 5-step stepwells with see-through steps Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Front nose headlight Nose door without window Two-piece nose top grab irons Battery cabinet access door without latch GE safety cab with three (3) side windows Right side cab under floor access doors: dual large louver panels per door Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s desktop controls In-cab grade crossing camera Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Octagonal antenna dome; small square antenna dome Intermediate: four (4) square bolted panels and three (3) tall horizontal X-panels Continuous reinforcement rib under dynamic brake intake grilles Standard dynamic brake exhaust (2-port) Rearward right-side air intake grille Left side auxiliary cab: three (3) short doors with latches on the #2 door; auxiliary cab filter box door Capacitor box on left side walkway Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Late angled engine cab profile with tri-fold power assembly access doors Lost-wax brass cast Nathan AirChime K3LAR2 horn mounted on engine cab Late non-flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Right side late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, tall grilles Low-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Late Hi-Ad trucks with cantilever struts on right front and left rear sideframes Rotating axle bearing caps No speed recorder Dual Graham-White (Prime) 975-075 air filters Graham-White 994-500 series air dryer 5,000-gallon fuel tank with vertical weld seams Single fuel fills per side Vertical analog fuel gauges; “blanked” round gauges; and digital fuel gauges Fuel tank mounted steel bell Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover Early square handbrake chain bracket Spare coupler knuckle holders on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22”

Metallradsätze, McHenry Kupplungen, schön detailliert

Metallradsätze

Metallradsätze

Metallradsätze, McHenry-Klauenkupplungen, fein detailliert mit zum Teil separat angebrachten Details, beschwert für bessere Laufeigenschaften

3 Container mit folgenden Nummern: 211237, 211276, 211277

All-new model Era: 1997 to 2005 Series 249135 to 249254, built 12/97 Road numbers 249180, 249186, 249198, 249216, 249223 and 249251 As delivered paint No conspicuity striping 2 x Version 4 Hood: Corner reinforcement, long side handrail, hood stacking brackets with solid inner guides Fully-assembled Multiple road numbers Body with dual trough design and center divider, sixteen walkway side supports and simulated wood trough interior. Designed for the use of two hoods although, depending on the type of steel, the car can be run without hoods as well. Body has four wireform side grab irons and four wireform end grab irons Each hood is constructed with up to 27 individual parts including 12 photo etched handrail stanchions, six wireform handrails, four wireform grab irons, two hood stacking brackets, two hood top braces, and lifting bail Handbrake housing with finely detailed wheel and chain See-through photo-etched metal walkway Simulated wood interior floor using a hand applied wash Four (4) positionable load dividers Four (4) large unwrapped coil steel loads with metal weight inside each Factory-applied end handrails, hood guides, stanchions, load divider tracks, metal grab irons, coupler cut levers, and trainline hoses with silver gladhands Complete underbody brake system with over 20 separately applied parts including air reservoir, control valve, and retainer valve plus wireform plumbing and trainline pipe with brackets Durable body-mounted die-cast metal semi-scale SE Type lower shelf knuckle couplers Highly-detailed Barber S-2 100-ton trucks with finely rendered raised foundry data, rotating bearing caps, side bearing detail, and separate brake beam detail Printed reporting mark and road number on all four trucks 36” machined metal wheels with accurately profiled .110" wide wheel tread Operates on Code 70, 83 and 100 rail Printing and lettering legible even under magnification Paint colors match Tru-Color Paint color: TCP-172 Weathered Concrete Weighted to Industry standards for reliable operation Packaging safely stores model Recommended radius 18”

• 與 DCC 解碼器
• 商品有聲音

New roadname Era: 1963 to early 1970s Series 1246 to 1284; built 1-6:1963 Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* Operating LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** Cab and rear number boards Front and rear multiple unit (MU) hose catch boxes and footboards 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with increased length on left (fireman’s) side and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Cab side vent on left side Sliding cab side windows Small mirrors mounted fore of cab side windows on both sides of cab No sunshades or sunshade tracks Lost-wax brass cast Leslie Supertyfon S-2M over the cab engineers side and single chime S-25 over the cab conductors side Bendix-King 'can' style antenna mounted on cab roof Accurate hood door and long hood detail Late single-panel inertial compartment Wire inertial air intake grills Tall turbo exhaust stack Standard-range dynamic brakes with 48” fan Early See-through dynamic brake intake grills with horizontal wires through vertical vanes 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Curved radiator fan grab iron Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with square and sloped bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bronze bell No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22”

• 與DCC的使用（DCC接口）

New roadname Era: mid 1970s to late 1980s Series 2200 to 2249, 2198-2199; ex-PRR/PC 2200 to 2251, built 2-5/63 Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated “hemisphere” walkway lights on hood ends, and at end of raised walkway duct* Operating LED-illuminated front and rear red marker lights with lenses** Cab and rear number boards Front and rear multiple unit (MU) hose catch boxes 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers with retrofitted switchman grab handles As-delivered pilot faces with uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle Dummy multiple unit (MU) receptacle mounted to end handrail stanchions “Short” stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD early “X” style pattern 81” GP30 low short hood with ratchet handbrake and square sand fill Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with increased length on left (fireman’s) side and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand No cab vents Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab No sunshades or sunshade tracks Lost-wax brass cast Leslie SU-3L-R horn mounted on right side cab eave Large Sinclair Excalibur “ice skate” antenna (communications) mounted on the cab roof Accurate hood door and long hood detail Late single-panel inertial compartment Wire inertial air intake grills Tall turbo exhaust stack Standard-range dynamic brakes with 48” fan Late See-through dynamic brake intake grills with horizontal wires through vertical vanes 6-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Curved radiator fan grab iron Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bronze bell Prime air filter (can style) 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22”

• 與DCC的使用（DCC接口）

Small data and label variations Operating LED front and rear tricolor flush-mounted with raised gasket class lights** Black cab armrest Raised slug electrical conduit cover on rear walkway deck with slug electrical bus connections on end Fully-assembled Multiple road numbers Operating LED ground lights on both sides of locomotive* Printed and LED lighted number boards* Extended walkway duct (SP toolbox) on left side Front and rear full width multiple unit (MU) hose catch tray 3-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Straight uncoupling levers with loop handles front and rear and four inner and two outer mounting brackets Notched pilot faces without lifting holes or slots Deck mounted multiple unit (MU) receptacle "Tall" stepwells with see-through steps Front and rear early small deck extension Handrail set with inward facing end rail mounting brackets and chain Standard front and rear drop steps Scale sectioned treadplate detail on walkways Rectangle walkway lights mounted between sandbox clean out doors (non-operating) 81” low short hood with ratchet handbrake with angled chain guard, “inverted” louvers on the left side, and round vent on top Bolted battery box doors with wide louvers SP “split” cab sub-base doors with stiffener rib and early hinges Standard EMD headlight in short hood Dash 2 cab with 11-bolt (top and bottom) window panels, modified (“used-to-be”) SP L-window, large armrests, and “inverted” hot water heater louvers on right front Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Vent on rear cab door, cab front above engineer’s window, and large square vent on cab roof on fireman’s side Sliding cab side windows Tall clear wind wings mounted fore and aft of cab side window on both sides of cab Standard EMD sunshades and long sunshade tracks Lost wax brass cast Nathan P-3 (P24R1 configuration) horn on number board housing “Whip” antenna mounted to center of cab roof Accurate hood door and long hood detail Early electrical cabinet "zig-zag" seam, further from rear of cab Early “stand-off” ECAFB Intermediate inertial air intake grills with top drip rail Dual tall exhaust stacks Accurately profiled extended-range dynamic brakes without batten strip See-through dynamic brake intakes with resistor grid detail Square PAF (Paper Air Filter) housing “Chicken-wire” radiator intake grilles See-through standard 48” radiator fan housings with fan blades visible inside Curved radiator fan grab iron Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, early center axle snubbers, sanding lines and brackets, and D-77 traction motor and air duct details, triple clasp brake shoes, and third brake cylinder Dimensionally accurate truck centers Speed recorder mounted to first axle left front Rearward facing handbrake chain mount for HTC trucks Tall jacking pads with holes (early) Aft engineer’s side sidesill notch Tab-mount EFCO Tripod-mount bell with air line on cab roof Salem air filter (accordion style) 4,000-gallon fuel tank with fuel fillers and dual vertical gauges and vertical breather pipe Factory-applied wire grab irons, wire lift rings, windshield wipers, trainline hoses with silver gladhands, sand hatch covers, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible even under magnification Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18” Recommended radius: 22”

• 與DCC的使用（DCC接口）

All-new model Era: 1995 to Late-90s Series 100 to 199; built 4-5/95 Road numbers 100 and 142 Left side auxiliary cab: three (3) tall doors with latches on the #2 No capacitor box on left side walkway Single large Sinclair “ice skate” communication antenna, and small Sinclair “ice skate” End of Train (EOT) telemetry antenna Late Hi-Ad trucks with cantilever struts on all four sideframes Fully-assembled Multiple road numbers No truck ground lights (prototype not equipped) Operating LED-illuminated front, rear, and side walkway lights* Operating LED-illuminated front deck-mounted alternating ditch lights** Printed high-mount cab number boards with separately controlled backlit LED-illumination* Tall snowplow with open doors and two (2) grab irons Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers 5-step stepwells with see-through steps Walkway with front anticlimber GE “nub” pattern walkway tread Narrow profile end handrails Dual dummy and single live pilot face MU connections Front nose headlight Nose door with window Two-piece nose top grab irons Battery cabinet access door without latch GE safety cab with three (3) side windows Right side cab under floor access doors: four screened louver sections per door Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s desktop controls Tinted cab side windows Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side Early inverter cabinet: six (6) tall vertical rectangular bolted panels and three (3) horizontal short panels Alternating reinforcement ribs under dynamic brake intake grilles Standard dynamic brake exhaust (2-port) Forward right-side air intake grille Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors Early curved engine cab profile Lost-wax brass cast Nathan AirChime P3 (P24R1 configuration) horn mounted on engine cab Early flanged exhaust stack housing “Bathtub” exhaust silencer 26 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment Late radiator door grilles in alternating heights Standard brake wheel Left rear hood door grille arrangement: tall, short, short grilles Tall, latched access door on long hood end Low-mounted rear sand fill Early “box” lifting lugs on ends of radiator wings Accurately profiled frame with separately-applied plumbing and traction motor cabling Rotating axle bearing caps No speed recorder Dual Graham-White (Prime) 975-075 air filters Graham-White 975-100 “twin tower” air filter dryer 5,000-gallon fuel tank with vertical weld seams Single fuel fills per side Round and vertical analog fuel gauges; digital fuel gauges Fuel tank mounted steel bell Separate air tanks with upper mounting brackets Early square handbrake chain bracket SP-style spare coupler knuckle boxes on rear pilot face Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Packaging safely stores model Minimum Radius: 18” Recommended Radius: 22”

• 與DCC的使用（DCC接口）

Era: 1997 to Early-2000s Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated front, rear, and side walkway lights* Operating LED-illuminated front pilot face mounted ditch lights** Printed low-mount cab number boards with separately controlled backlit LED-illumination*, Tall snowplow with open doors and two (2) grab irons, Semi-scale coupler buffer equipped with durable metal semi-scale Type E lower-shel knuckle couplers, 5-step stepwells with see-through steps, Walkway with front anticlimber, GE “nub” pattern walkway tread, Narrow profile end handrails, Single dummy and single live pilot face MU connections, Front nose headlight, Two-piece nose top grab irons, Battery cabinet access door without latch, GE safety cab with three (3) side windows, Right side cab under floor access doors: four screened louver sections per door, Left side cab under floor access doors: dual latch door with grille forward of the HVAC unit, Cab interior with detailed back wall and front dash, high-back seats, conductor’s workstation, and engineer’s desktop controls, Tinted cab side windows, Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side, Early inverter cabinet: six (6) tall vertical rectangular bolted panels and three (3) horizontal short panels, Continuous reinforcement rib under dynamic brake intake grilles, Standard dynamic brake exhaust (2-port), Forward right-side air intake grille, Left side auxiliary cab: three (3) medium doors with latches on the #2 door, Capacitor box on left side walkway, Right side auxiliary cab: four (4) doors with latches on #1 and #4 doors, Late angled engine cab profile with tri-fold power assembly access doors, Lost-wax brass cast Nathan AirChime K3LAR2 horn mounted on engine cab, Late non-flanged exhaust stack housing, “Bathtub” exhaust silencer, 26 individually-applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment, Late radiator door grilles in alternating heights, Standard brake wheel, Left rear hood door grille arrangement: tall, short, tall grilles, Low-mounted rear sand fill, Early “box” lifting lugs on ends of radiator wings, Accurately profiled frame with separately-applied plumbing and traction motor cabling, Late Hi-Ad trucks with cantilever struts on right front and left rear sideframes, Rotating axle bearing caps, No speed recorder, Dual Graham-White (Salem) 824-100 centrifugal air filters, No air dryer, 5,000-gallon fuel tank with vertical weld seams, Single fuel fills per side, Round and vertical analog fuel gauges; digital fuel gauges, Fuel tank mounted steel bell, Separate air tanks with lower mounting brackets, connector pipe, and connector pipe cover,Early square handbrake chain bracket, Spare coupler knuckle holders on rear pilot face, Factory-applied detail parts: wire grab irons, spare knuckles, trainline hoses with silver gladhands, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, and more Motor with 5-pole, skew-wound armature, Dual flywheels, All-wheel drive, All-wheel electrical pick-up, Directional LED headlights, Printing and lettering legible under magnification, Operates on Code 70, 83, and 100 rail, Minimum Radius: 18”, Recommended Radius: 22” Operate on DC layouts DCC ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate *** Compatible with appropriately programmed ESU decoders while operating using DCC

• 與 DCC 解碼器
• 商品有聲音

Museum Qualität, noch mehr Details und Funktionen Das Set besteht aus A-Unit, B-Unit und Tender Alle Achsen angetrieben, Stromaufnahme über alle Achsen, LED Beleuchtung, Inneneinrichtung ESU LokSound + DCC Decoder Road Number Specific ScaleTrains Era: Early 1960s to Present Displayed at the Illinois Railway Museum - Union, IL Series 16 to 30, built 8/60 Road number 18 3-unit set: “A”, “B”, and Fuel Tender Premium leather-like presentation case with metal latches for safe storage Fully-assembled Multiple road numbers available Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Minimum radius: 18” without water and electrical bus connections and tender truck safety chain detail attached Recommended radius: 22” “A” Control Unit Operating LED-lit tricolor (red, green, and white) class lights** Operating LED-lit cab interior light Operating LED-lit control panel Operating LED-lit ground light on engineer’s side Operating LED-lit rear walkway light Printed and LED lighted number boards With nose side grab irons Opening cab doors with separate door handles Detailed cab interior with separate control stand, floor, rear wall with water cooler, and seats Radiator mounted lost wax brass Leslie S-5T-R air horn mounted on clearance bracket Cab roof heater box with grille on right side only Square base whip antenna Large see-through photo-etched metal side grilles H – I dynamic brake housing with etched-metal grilles With air intake scoops Modified radiator with all-weather shutter Underbody frame rail with traction motor cable detail As delivered 2,500 Gallon diesel fuel tank with extended retrofit Air tanks with separate plumbing Rubber Multiple Unit (MU) and electrical bus connections between the “A” and “B” units Rubber water hoses between the “A” and “B” unit Durable metal semi-scale Type E knuckle couplers Factory-applied ladders, wire grab irons, coupler cut levers, windshield wipers, mirrors, trainline hose, lifting lugs, exhaust stack, bell, and sanding lines Highly detailed trucks with separately applied brake cylinders, air pipes and lost wax brass wheel slip indicators on left side frames Mixed SKF and Timken bearings on right side truck frames Chicago Pneumatic speed recorder on second axle right side Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pickup Directional LED headlight DCC & sound equipped locomotives feature: Operates on both DC and DCC layouts ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Prime mover sound Curve squeal sound Frog clank sound Large oval speaker ESU designed “PowerPack” withtwosuper capacitors*** DC/DCC & sound ready locomotives feature: Operable using a DC power pack DCC-ready with 21-pin connector “B” Turbine Unit Operating LED-lit back-up light Sliding engine compartment side doors Detailed interior with turbine visible inside Spinning turbine fan blade visible inside exhaust Farr Dynavane inertial type air intake housing I – I dynamic brake housing with etched-metal grilles Offset air intake scoops Blanked door panels With rear MU connections Factory-applied ladders, wire grab irons, coupler cut levers, trainline hose, lifting lugs, and sanding lines Underbody frame rail Highly detailed trucks with separately applied brake cylinders, air pipes and lost wax brass wheel slip indicators on left side frames Timken bearings on right side truck frames Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pickup DCC & sound equipped locomotives feature: Operates on both DC and DCC layouts ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Turbine sound Curve squeal sound Frog clank sound Large oval speaker ESU designed “PowerPack” withtwosuper capacitors*** DC/DCC & sound ready locomotives feature: Operable using a DC power pack DCC-ready with 21-pin connector 24C Fuel Tender 24,000-gallon capacity Welded seams Insulated Commonwealth 6-axle trucks Truck chains Factory-applied air tank, brake cylinder, and control valve Factory-applied multiple unit (MU) hoses Photo-etched metal tender deck walkway Operating LED-lit rear tender light * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** During DC operation, class lights illuminate in white. Access to other colors and the ability to change colors requires an ESU DCC decoder while operating in DCC *** Compatible with appropriately programmed ESU decoders while operating using DCC

• 與 DCC 解碼器
• 商品有聲音

Museum Qualität, noch mehr Details und Funktionen Das Set besteht aus A-Unit, B-Unit und Tender Alle Achsen angetrieben, Stromaufnahme über alle Achsen, LED Beleuchtung, Inneneinrichtung ESU LokSound + DCC Decoder Era: Late Mid 1960s to Late 1960s Series 1 to 15, built 2/59 Road number 6 3-unit set: “A”, “B”, and Fuel Tender Premium leather-like presentation case with metal latches for safe storage Fully-assembled Multiple road numbers available Printing and lettering legible under magnification Operates on Code 70, 83, and 100 rail Minimum radius: 18” without water and electrical bus connections and tender truck safety chain detail attached Recommended radius: 22” “A” Control Unit Without “Union Pacific” lettering on the nose Operating LED-lit tricolor (red, green, and white) class lights** Operating LED-lit cab interior light Operating LED-lit control panel Operating LED-lit ground light on engineer’s side Operating LED-lit rear walkway light Printed and LED lighted number boards With nose side grab irons Opening cab doors with separate door handles Detailed cab interior with separate control stand, floor, rear wall with water cooler, and seats Radiator mounted lost wax brass Leslie S-5T-R air horn mounted on clearance bracket Cab roof heater box with grille on right side only Square base whip antenna Large see-through photo-etched metal side grilles H – H dynamic brake housing with etched-metal grilles With air intake scoops Modified radiator with all-weather shutter Underbody frame rail with traction motor cable detail As delivered 2,500 Gallon diesel fuel tank Air tanks with separate plumbing Auxiliary reservoirs Rubber Multiple Unit (MU) and electrical bus connections between the “A” and “B” units Rubber water hoses between the “A” and “B” unit Durable metal semi-scale Type E knuckle couplers Factory-applied ladders, wire grab irons, coupler cut levers, windshield wipers, mirrors, trainline hose, lifting lugs, exhaust stack, bell, and sanding lines Highly detailed trucks with separately applied brake cylinders, air pipes and lost wax brass wheel slip indicators on left side frames Mixed SKF and Timken bearings on right side truck frames Chicago Pneumatic speed recorder on second axle right side Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pickup Directional LED headlight DCC & sound equipped locomotives feature: Operates on both DC and DCC layouts ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Prime mover sound Curve squeal sound Frog clank sound Large oval speaker ESU designed “PowerPack” with two super capacitors*** DC/DCC & sound ready locomotives feature: Operable using a DC power pack DCC-ready with 21-pin connector “B” Turbine Unit Operating LED-lit back-up light Sliding engine compartment side doors Detailed interior with turbine visible inside Spinning turbine fan blade visible inside exhaust Dual Farr Dynavane inertial type air intake housings Single H dynamic brake housing with etched-metal grilles Offset air intake scoops With rear MU connections Factory-applied ladders, wire grab irons, coupler cut levers, trainline hose, lifting lugs, and sanding lines Underbody frame rail Highly detailed trucks with separately applied brake cylinders, air pipes and lost wax brass wheel slip indicators on left side frames Mixed SKF and Timken bearings on right side truck frames Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pickup DCC & sound equipped locomotives feature: Operates on both DC and DCC layouts ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature Turbine sound Curve squeal sound Frog clank sound Large oval speaker ESU designed “PowerPack” with two super capacitors*** 24C Fuel Tender 24,000-gallon capacity Welded seams Insulated Commonwealth 6-axle trucks Truck chains Factory-applied air tank, brake cylinder, and control valve Factory-applied multiple unit (MU) hoses Photo-etched metal tender deck walkway Operating LED-lit rear tender light

• 與 DCC 解碼器

Metallradsätze, sehr detailliert mit vielen separat angebrachten Details Road Number Specific All-new model Fully assembled 24-C-GTE Class insulated body 24,000-gallon capacity Welded seams Intricate electrical and water plumbing Factory-applied air tank, brake cylinder, and control valve Brake beam Handbrake housing with finely detailed wheel and chain Factory-applied multiple unit (MU) hoses, coupler cut levers, and trainline hoses Durable body-mounted die-cast metal semi-scale Type E knuckle couplers Commonwealth 3-axle trucks with SKF bearings 36” machined metal wheels Accurately profiled .110" wide wheel tread Directional front and rear LED lighting 2-function DCC programmable decoder Operate using DC and DCC Operates on Code 70, 83 and 100 rail Truck safety chains available separately (SXT80111) – requires 22” minimum radius curve Printing and lettering legible even under magnification Color matched to Tru-Color paint Weighted above Industry standards Packaging safely stores model Minimum radius: 18”

538,00 € 每1000 公克

Road Number Specific ScaleTrains Fully assembled "Joe Jordan" Two (2) roof equipment boxes Water plumbing details. Unique weld seam locations Riveted end access plates Commonwealth 3-axle trucks with rotating bearing caps 24,000-gallon capacity Non-insulated Intricate electrical and water plumbing Handbrake housing with finely detailed wheel and chain Factory-applied air tank, brake cylinder, and control valve Brake beam Underbody brake details and plumbing Factory-applied multiple unit (MU) hoses, coupler cut levers, and trainline hoses Durable body-mounted metal semi-scale Type E knuckle couplers 36” machined metal wheels Accurately profiled .110" wide wheel tread Directional front and rear LED lighting 2-function DCC programmable decoder Operate using DC and DCC Operates on Code 70, 83 and 100 rail Printing and lettering legible even under magnification Weighted above Industry standards Packaging safely stores model Truck safety chains available separately (SXT80111) – requires 22” minimum radius curve Minimum radius: 18”