Innovation! Delivery February 2025

New roadname Era: Mid 2010’s to present Series 100500 to 100673; ex-CTRN 500001 to 500177, Built 8-10/93 Road number 100524 Equipped with UP gray hoods Fully-assembled Multiple road numbers Body with dual trough design and center divider, sixteen walkway side supports and simulated wood trough interior. Designed for the use of two hoods although, depending on the type of steel, the car can be run without hoods as well. Body has four wireform side grab irons and four wireform end grabirons 2 x Version 1 Hood: No corner reinforcement, long side handrail with grab irons, hood stacking brackets with outer extensions Each hood is constructed with up to 16 individual parts including six wireform handrails, four wireform grab irons, two hood stacking brackets, two hood top braces, and lifting bail Handbrake housing with finely detailed wheel and chain See-through photo-etched metal walkway Simulated wood interior floor using a hand applied wash Four (4) positionable load dividers Four (4) large die cast unwrapped coil steel loads Factory-applied end handrails, hood guides, stanchions, load divider tracks, metal grab irons, coupler cut levers, and trainline hoses with silver gladhands Complete underbody brake system with over 15 separately applied parts including air reservoir, control valve, and retainer valve plus wireform plumbing and trainline pipe with brackets Body-mounted semi-scale standard Type E knuckle couplers – Micro-Trains® compatible ASF Ride Control trucks with finely rendered raised foundry data 36” machined metal wheels Operates on Code 55, 70 and 80 rail FRA-224 yellow conspicuity striping Printing and lettering legible even under magnification Weighted to Industry standards for reliable operation Clear jewel box packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11”

Innovation! Delivery February 2025

New roadname Era: 1993 to Early 2010s Series 7400 to 7499; Built 4-5/93 Road number 7401 Equipped with NS and EJ&E Hoods, FRA-224 yellow conspicuity striping Fully-assembled Multiple road numbers Body with dual trough design and center divider, sixteen walkway side supports and simulated wood trough interior. Designed for the use of two hoods although, depending on the type of steel, the car can be run without hoods as well. Body has four wireform side grab irons and four wireform end grabirons 2 x Version 1 Hood: No corner reinforcement, long side handrail with grab irons, hood stacking brackets with outer extensions Each hood is constructed with up to 16 individual parts including six wireform handrails, four wireform grab irons, two hood stacking brackets, two hood top braces, and lifting bail Handbrake housing with finely detailed wheel and chain See-through photo-etched metal walkway Simulated wood interior floor using a hand applied wash Four (4) positionable load dividers Four (4) large die cast unwrapped coil steel loads Factory-applied end handrails, hood guides, stanchions, load divider tracks, metal grab irons, coupler cut levers, and trainline hoses with silver gladhands Complete underbody brake system with over 15 separately applied parts including air reservoir, control valve, and retainer valve plus wireform plumbing and trainline pipe with brackets Body-mounted semi-scale standard Type E knuckle couplers – Micro-Trains® compatible ASF Ride Control trucks with finely rendered raised foundry data 36” machined metal wheels Operates on Code 55, 70 and 80 rail Printing and lettering legible even under magnification Weighted to Industry standards for reliable operation Clear jewel box packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11”

Road Number Specific ScaleTrains New road name Era: 1997 to present Series 242000 to 242236 Class G-110-90, built 10-12/97 Fully-assembled Multiple road numbers Early body type, built by Thrall: Thrall builder logos, heavy “H” shaped reinforcement on top of draft gear, and end handrails attached to hood ends Early V2 Hood: End handrails, round top lifting bail, inside guide stacking bracket and single reinforcement hood braces Hoods are constructed with 10 individual parts including four (4) wireform side grab irons, two (2) wireform end handrails, two (2) hood stacking brackets, two (2) hood reinforcement braces, and lifting bail Five (5) wrapped coil steel weight loads: two (2) small and three (3) medium Separate positionable coil steel load dividers Simulated wood interior floor using hand applied wash Body with four wireform side grab irons Factory-applied hood guides (4); brake wheel, stand, and chain; coupler cut levers (2); and trainline hoses (2) See-through photo-etched metal wrap-around walkway Complete underbody brake system with over 10 separately applied parts including air reservoir, control valve, retainer valve, and wireform plumbing ASF Ride Control trucks with finely rendered raised foundry data 36” machined metal wheels Body-mounted semi-scale standard Type E knuckle couplers – Micro-Trains® compatible Printing and lettering legible even under magnification Weighted to Industry standards for reliable operation Operates on Code 55 and 70 rail Clear jewel box packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11”

Road Number Specific ScaleTrains New road name Era: 1997 to present Series 242000 to 242236 Class G-110-90, built 10-12/97 Fully-assembled Multiple road numbers Early body type, built by Thrall: Thrall builder logos, heavy “H” shaped reinforcement on top of draft gear, and end handrails attached to hood ends Early V2 Hood: End handrails, round top lifting bail, inside guide stacking bracket and single reinforcement hood braces Hoods are constructed with 10 individual parts including four (4) wireform side grab irons, two (2) wireform end handrails, two (2) hood stacking brackets, two (2) hood reinforcement braces, and lifting bail Five (5) wrapped coil steel weight loads: two (2) small and three (3) medium Separate positionable coil steel load dividers Simulated wood interior floor using hand applied wash Body with four wireform side grab irons Factory-applied hood guides (4); brake wheel, stand, and chain; coupler cut levers (2); and trainline hoses (2) See-through photo-etched metal wrap-around walkway Complete underbody brake system with over 10 separately applied parts including air reservoir, control valve, retainer valve, and wireform plumbing ASF Ride Control trucks with finely rendered raised foundry data 36” machined metal wheels Body-mounted semi-scale standard Type E knuckle couplers – Micro-Trains® compatible Printing and lettering legible even under magnification Weighted to Industry standards for reliable operation Operates on Code 55 and 70 rail Clear jewel box packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11”

Innovation! Delivery February 2025

New paint scheme Era: Early 2000s to present Series 534200 to 534219; ex-BN 686000 to 686019, Built 8-11/93 Road number 534208 Equipped with one ATSF and one P-C Hood Fully-assembled Multiple road numbers Body with dual trough design and center divider, sixteen walkway side supports and simulated wood trough interior. Designed for the use of two hoods although, depending on the type of steel, the car can be run without hoods as well. Body has four wireform side grab irons and four wireform end grabirons 2 x Version 1 Hood: No corner reinforcement, long side handrail with grab irons, hood stacking brackets with outer extensions Each hood is constructed with up to 16 individual parts including six wireform handrails, four wireform grab irons, two hood stacking brackets, two hood top braces, and lifting bail Handbrake housing with finely detailed wheel and chain See-through photo-etched metal walkway Simulated wood interior floor using a hand applied wash Four (4) positionable load dividers Four (4) large die cast unwrapped coil steel loads Factory-applied end handrails, hood guides, stanchions, load divider tracks, metal grab irons, coupler cut levers, and trainline hoses with silver gladhands Complete underbody brake system with over 15 separately applied parts including air reservoir, control valve, and retainer valve plus wireform plumbing and trainline pipe with brackets Body-mounted semi-scale standard Type E knuckle couplers – Micro-Trains® compatible ASF Ride Control trucks with finely rendered raised foundry data 36” machined metal wheels Operates on Code 55, 70 and 80 rail FRA-224 yellow conspicuity striping Printing and lettering legible even under magnification Paint colors match Tru-Color Paint color: TCP-199 ATSF Freight Car Red Weighted to Industry standards for reliable operation Clear jewel box packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11”

Innovation! Delivery February 2025

New roadname Era: 1993 to Early 2010s Series 7400 to 7499; Built 4-5/93 Road number 7477 Equipped with CSX and EJ&E Hoods, FRA-224 yellow conspicuity striping Fully-assembled Multiple road numbers Body with dual trough design and center divider, sixteen walkway side supports and simulated wood trough interior. Designed for the use of two hoods although, depending on the type of steel, the car can be run without hoods as well. Body has four wireform side grab irons and four wireform end grabirons 2 x Version 1 Hood: No corner reinforcement, long side handrail with grab irons, hood stacking brackets with outer extensions Each hood is constructed with up to 16 individual parts including six wireform handrails, four wireform grab irons, two hood stacking brackets, two hood top braces, and lifting bail Handbrake housing with finely detailed wheel and chain See-through photo-etched metal walkway Simulated wood interior floor using a hand applied wash Four (4) positionable load dividers Four (4) large die cast unwrapped coil steel loads Factory-applied end handrails, hood guides, stanchions, load divider tracks, metal grab irons, coupler cut levers, and trainline hoses with silver gladhands Complete underbody brake system with over 15 separately applied parts including air reservoir, control valve, and retainer valve plus wireform plumbing and trainline pipe with brackets Body-mounted semi-scale standard Type E knuckle couplers – Micro-Trains® compatible ASF Ride Control trucks with finely rendered raised foundry data 36” machined metal wheels Operates on Code 55, 70 and 80 rail Printing and lettering legible even under magnification Weighted to Industry standards for reliable operation Clear jewel box packaging safely stores model Minimum radius: 9 ¾” Recommended radius: 11”