Für Kato Glacier Express and 4-8-4 FEF Steam Format DCC, für Gleichstrommotoren, 1,25 Amp (1.5/2 A Spitze), 6-500mA , 6 FX Funktionen, geräuscharme Motoransteuerung, einfache Montage, mit Beleuchtung, Lastregelung, Transponding, mit englischer Anleitung

1.0 Amp/1.5 Amps Peak •Program CVs using any Digitrax Compatible Control system without havingto buy any extra equipment. •2 Digit and 4 Digit Addressing. •Basic, Advanced & UniVersal Consisting. •SuperSonic motor drive for silent operation. •Direct mode programming. •Decoder Reset CV with or without speed table reset. •Transponder Equipped ready for transponding on your Layout. •Motor Isolation Protection helps prevent damage to your decoder. •Automatic Analog Mode Conversion when running on DC layout. •Decoder Lock for individual programming of multiple decoders in one loco. •Digitrax “No Worries” Warranty

Tiny Super Economical Motor & Function Decoder * Fits many N and HO Scale Locomotives * Digitrax N Scale Harness and Plug arrangement for economic decoder sharing options * 13.86mm x 10.3mm x 4.83mm * 3 FX3 Functions * 1 Amp Continuous/1.25 Amp Peak Rating * Full Digitrax Series 5 mobile decoder feature set 13.86mm x 10.3mm x 4.83mm Installation Digitrax Easy Connect 8-pin Harness Function Outputs 4-500mA Function Type FX3 Features Series 3

- 21-Pol Schnittstelle

Für Gleichstrommotoren, 1.5 Amp (2.0 Amp Peak), 2 FX Funktionen 0,5 Amp. 20.45mm x 16.26mm x 4.32mm. * 128 Fahrstufen. * Beschleunigung und Verzögerung einstellbar. * Normale Fahrtrichtung umkehrbar. * Rangierbetrieb anwählbar, erleichtert die Arbeit im Rangierbahnhof. * 3 Punkt-Geschw. Kennlinie, legen Sie Start,-Mitten-und Maximalspannung fest. * 28 Geschw. Kennlinien anwählbar, mit 256 Punkt Resolution für präzises Fahren. * Super Sonic Motor Ansteuerung für leisen, ruhigen Lauf. * LED oder Glübirnen einstellbar * 2 FX Funktions Ausgänge für prototypische Beleuchtung mit an-aus Kontrolle. * Beleuchtung konstant, schaltbarunabhängig, oder abh. von der Fahrtrichtung. * Realistische Effekte, z.B. Drehfeuer, Stroblicht, Gleisbeleuchtung u.v.m. * FX Standard Funktion: F0 an-aus schaltbar, abhängig von der Fahrtrichtung, bzw.Bewegung oder Stillstand der Lok. * Mapping Festlegen welche Taste welche Funktionen steuert. * Hauptlichtschalter, schaltet mit einer Taste alle Lichter und Funktionen aus. * 21-Pol Schnittstelle * Transponder Identifikation: Bereit für den Betrieb auf Ihrer Anlage, kompatibel mit digitalen Surround Systemen. * All-Modus Programmierung * Decoder CV's: Rücksetzung mit oder ohne Berücksichtigung der Kennlinien. * Motor: Isolierung hilft, Ihren Decoder zu schützen. * Mehrfachtraktion: Elementare, "fortgeschrittene", oder Universal Programmierung. * Adressen (Loknummern): 2 oder 4 stellig. (Erweiterte Adresse) * DCC kompatibel

More Locos More Capacity Really Big Fun!

Zentrale mit 8 Amp. Ausgangsstrom und separatem Programmiergleisausgang, Handbuch Englisch. The DCS240 Advanced Command Station lets your LocoNet® System run up to 400 locos and 400 throttles. Full read/write programming, route capability, USB connectivity, and separate programming output lets you run and program at the same time. •5 or 8 Amps of Power •400 Loco Addresses •400 Throttle Support •Combination Advanced LocoNet® Command Station and 8 amp CTC booster •User selectable N,HO, and large scale operation with Voltage Trim •LocoNet for easy plug ‘n play installation and system expansion •Auto resetting over temperature and short circuit protection •Hardware EZ routes and Loco Reset •Integrated USB for Computer Support •Over-Voltage Protected •Auto shutdown when command control signal is lost to prevent “runaway” trains

- der neue Soundbug wird einfach in die Schnittstelle der 165er Decoder gesteckt - - 8 versch. Diesel- und Damploksounds aufgespielt -

Passt an 165er Decoder und macht diese zum Sounddecoder, wird einfach eingesteckt. keine Lötarbeiten erforderlich. Einbausatz mit englischer Anleitung. 8 versch. Dieselsounds und Damploksounds sind bereits aufgespielt und lassen sich über CV auswählen. - arbeite mit 8 oder 16 Bit Sound - 1Watt Leistung - Lautsprecher 16mm x 26mm x 9mm. - 330uF Kondensator - Gleisspannung bis 16 Volt Über F1 bis F12 die verschiedenen Effekte auslösen z. Bsp. Glocke, Horn, Kupplungsgeräusch, Lautstärke, Bremsen, Wasserpumpe usw. Über CV programmierbar: - Dampf- oder Dieselsound auswählen - Lautstärke (Gesamt, Horn, Glocke usw.) - Länge der einzelnen Effekte - Synchron zur Geschwindigkeit/Gleichlauf - Nachlaufzeit und vieles mehr. Sounds von www.digitrax.com/sounddepot downloaden und mit dem Digitrax Programmer aufspielen: AC4400 SD38-2 F40PH GE Evolution Traction/Trolley SD70 Western Pacific #1983 British DMU Class 108 British Class 37 British Light-Prairie 2-6-2 44XX British Yorkshire switcher U33 RDC Bells and Whistles GP10 #7562 Union Pacific Challenger #3985 SW1 #4741 E8 Southern #6900 SW1C #4742 ALCO RS32 #30 Fairbanks Morse 1244 Switcher SD40-2 GP38 C44-9 und andere.

- 8 versch. Diesel- und Dampfloksounds vorinstalliert - passend für Kato 4-8-4 FEF

- Einfach die Platine mit der alten tauschen - Sounddecoder und Motorfunktion belastbar bis 1A/2A Spitze - 16 Bit sound - 4 FX3 Funktionen - Ready to run, 8 versch. Diesel- und Dampfloksounds vorinstalliert - 6 Funktionsausgänge mit 200mA - 8 Ohm, 9x18x4 mm Lautsprecher liegt bei - Sounds zum downloaden mit dem PR3 Programmer - 1 Watt Sound Output - 100uF Kondens

Leistungsverstärker mit 3/5/8 Amp. Ausgangsstrom mit Kehrschleifenumschaltung, für grosse H0 Anlagen oder grosse Spuren, mit englischer Anleitung. Ein WESTERN-ANSCHLUSSKABEL RJ12 wird benötigt, erhältlich z. Bsp. bei Conrad Elektronik: Artikel-Nr.: 922694 WESTERN-ANSCHLUSSKABEL RJ12 6/6 3M SW 5,18 EUR

Leistungsverstärker mit 3/5/8 Amp. Ausgangsstrom mit Kehrschleifenumschaltung, für grosse H0 Anlagen oder grosse Spuren, mit englischer Anleitung. Belastbar bis 16 A. Ein WESTERN-ANSCHLUSSKABEL RJ12 wird benötigt, erhältlich z. Bsp. bei Conrad Elektronik: Artikel-Nr.: 922694 WESTERN-ANSCHLUSSKABEL RJ12 6/6 3M SW 5,18 EUR

- Mobile Decoder with 8-Bit SoundFX - 21MTC interface with Configurable Logic Level or 12v F3-6 function outputs - 2 Selectable Steam & Diesel Sound Schemes - 1.0 Amp/2 Amps Peak - 8 FX3 Functions, 200ma output - Series 6 Decoder Features - Works with PX112-2 Power Xtender - Speaker sold separately - 29.28mm x 16.26mm x 5.34mm

- Mobile Decoder with Premium 16-Bit SoundFX - 21MTC interface with Configurable Logic Level or 12v F3-6 function outputs - 8 Selectable Steam & Diesel Sound Schemes - 1.0 Amp/2 Amps Peak - 8 FX3 Functions, 200ma output - Series 6 Decoder Features - Works with PX112-2 Power Xtender - Speaker sold separately - 29.28mm x 16.26mm x 5.34mm

- Mobile Decoder - 21MTC interface with Configurable Logic Level or 12v F3-4 function outputs - 1.5 Amp/2 Amps Peak - 6 FX3 Functions, 0.5 Amp - Series 6 Decoder Features - Works with PX112-2 Power Xtender - 20.92mm x 16.26mm x 4.32mm

- For Intermountain N scale F3 and F7 A & B units with motor contact "shoes" - 6 FX3 Functions - 11.98mm x 54.99mm x 2.4 mm

The LNWI allows you to connect compatible WiFi devices to LocoNet and run trains using compatible throttle apps. The apps available can be downloaded from this page. •Wi-Fi interface to a Digitrax LocoNet for up to four compatible mobile Wi-Fi devices and Apps. •Compatible with most Android and Apple devices running supported throttle apps •Easy Setup and Configuration. A single LNWI works ‘out of the box’, with no additional configuration required. •Provides up to 32 LocoNet Throttle functionality per LNWI, with compatible apps and Command Station. •Up to 8 LNWI can be supported per LocoNet •Multiple LNWI units automatically resolve SSID with no additional configuration •Optional Wi-Fi WPA2 security for layout operations in public. •Option switches to fully customize all device settings •LocoNet Compatible

Digitrax Easy Connect 8 Pin Plug to 8 pin DCC medium plug Motor & Function Decoder that fits many N and HO Scale Locos. 22.16mm x 10.28mm x 5.1mm •1.0 Amp/1.5 Amps Peak •6 FX3 Functions, 0.5 Amp •Digitrax Easy Connect 8 Pin Plug to 8 pin DCC medium plug. •Works with PX112-6F Power Xtender.

BXP88 makes adding detection and transponding to your layout easier than ever. No more complicated wiring! •DCC Occupancy Detection supports up to 8 Detection Sections letting you know when equipped rolling stock is in a detection section on your layout. •One Transponding Zone per Detection Section lets you know the location of transponder-equipped locos or rolling stock. •Intelligent Automatic short-circuit and over-current power management for each Detection Section, improves reliability by avoiding most booster fault shutdowns. •Connects to LocoNet to transmit Detection Section occupancy, Transponding and track power information. •Detects any powered locomotives in a Detection Section. •Identify where specific rolling stock is on your layout with Digitrax transponder-equipped locos and rolling stock. •Detects rolling stock equipped with resistor wheel sets. •Plug and Play with Digitrax DCC systems with automatic Railsync polarity detection. •LED output headers for front panel indication of Detection Section occupancy, Transponding, and power status. •Easy-connect pluggable track wire terminal blocks can plug-in straight or at right angles. •3 Amp capacity per Detection Section , 8 Amp total unit capacity. •Automatically updates status at track power on. •Operations Mode Read Back allows you to read CV values of decoders equipped with transponders when on track. •Firmware update capability via IPL over LocoNet.

- For Intermountain N scale F7A & B units with wired motors produced after Jan 2014 - 6 FX3 Functions - 11.98mm x 54.99mm x 2.4 mm

Current Rating-Motor1.0 Amp/1.25 Amps PeakSize0.271” x 1.296” x .099” (6.8834mm x 32.9184mm x 25.146mm)InstallationBoard Replacement (show less) These decoders are made to fit specific locomtoive chassis. Locomotives that have circuit boards that can have decoders installed in place of the original circuit board are made by many manufacturers. In some cases, locomotive modifications, motor isolation and additional soldering may be required during installation of this type of decoder. Function leads can be added to these decoders using solder pads available on the decoder. See the instruction sheet for the particular decoder you are using for specific instructions. Sometimes these are called plug n' play or drop in decoders. Function Outputs2-500mAFunction TypeFX3 (read more) Current Rating-Motor1.0 Amp/1.25 Amps PeakSize0.271” x 1.296” x .099” (6.8834mm x 32.9184mm x 25.146mm)InstallationBoard Replacement (show less) These decoders are made to fit specific locomtoive chassis. Locomotives that have circuit boards that can have decoders installed in place of the original circuit board are made by many manufacturers. In some cases, locomotive modifications, motor isolation and additional soldering may be required during installation of this type of decoder. Function leads can be added to these decoders using solder pads available on the decoder. See the instruction sheet for the particular decoder you are using for specific instructions. Sometimes these are called plug n' play or drop in decoders. Function Outputs2-500mAFunction TypeFX3 (read more) Current Rating-Motor1.0 Amp/1.25 Amps PeakSize0.271” x 1.296” x .099” (6.8834mm x 32.9184mm x 25.146mm)InstallationBoard Replacement (show less) These decoders are made to fit specific locomtoive chassis. Locomotives that have circuit boards that can have decoders installed in place of the original circuit board are made by many manufacturers. In some cases, locomotive modifications, motor isolation and additional soldering may be required during installation of this type of decoder. Function leads can be added to these decoders using solder pads available on the decoder. See the instruction sheet for the particular decoder you are using for specific instructions. Sometimes these are called plug n' play or drop in decoders. Function Outputs2-500mA FeaturesSeries 3 (read more) FeaturesSeries 3 (read more)

Weitere Infos auf und Sounds zum downloaden: www.digitrax.com/sounddepot.php

The PR4 makes decoder programming and interfacing your layout and computer easier than ever. The PR4 seamlessly switches between computer interface and decoder programming modes automatically without having to press any buttons. The PR4 is electrically isolated between USB and LocoNet for added stability and protection. Packaged in a smaller footprint the PR4 offers all the same great features as the PR3 it replaces. Mit dem PR4 Decoder Programmer und SoundLoader Software, in Verbindung mit PC und Programmiergleis können Sie: - Sound nach Ihren Wünschen verändern - Sounds downloaden - testen - CVs umprogrammieren - SoundLoader Software zum Download auf der Digitrax Webseite Im Kit enhalten sind: - PR4 Programmer - USB Schnittstelle Benötigt wird: - 12-15V (DC) Gleichstrom Netzteil - PC mit Windows XP - Programmiergleis - Windows XP, Vista and 2000. - Mac OS 10.4/10.5 mit JMRI. Sounds von www.digitrax.com/sounddepot downloaden und mit dem Digitrax Programmer aufspielen: AC4400 SD38-2 F40PH GE Evolution Traction/Trolley SD70 Western Pacific #1983 British DMU Class 108 British Class 37 BritishLight-Prairie 2-6-2 44XX British �Yorkshire� switcher U33 RDC Bells and Whistles GP10 #7562 Union Pacific Challenger #3985 SW1 #4741 E8 Southern #6900 SW1C #4742 ALCO RS32 #30 Fairbanks Morse 1244 Switcher SD40-2 GP38 C44-9 weitere folgen in Kürze.

•For Intermountain N scale FT A units with motor contact "shoes" •6 FX3 Functions •.472” x 2.165” x .098” 11.98mm x 54.99mm x 2.4 mm •Replaces DN163I1A