Metallradsätze, sehr detailliert mit vielen separat angebrachten Details Road Number Specific All-new model Era “Jim Adams” UPP #809 Era: 2008 to present “Joe Jordan” UPP #814 Era: 2006 to present #809 American flag printed on separate photo-etched metal placard Roof equipment boxes and water plumbing details. Different weld seam locations and riveted end access plates for each tender Commonwealth 3-axle trucks with rotating bearing caps 24,000-gallon capacity Non-insulated Intricate electrical and water plumbing Brake beam Handbrake housing with finely detailed wheel and chain Underbody brake details and plumbing Durable body-mounted metal semi-scale Type E knuckle couplers 36” machined metal wheels Directional lighting Truck chains available separately – requires minimum 22” radius curve Minimum radius: 18” All Rivet Counter Cars Features Fully-assembled Color matched to Tru-Color Paint colors Printing and lettering legible even under magnification Accurately profiled .110" wide wheel tread Coupler cut levers Trainline hoses Intricate brake plumbing Weighted to Industry standards Operates on Code 70, 83 and 100 rail Packaging safely stores model

259,00 € per 1000g

• with DCC Decoder
• with Sound

All-new model Series UP 700B to 726B (Freight), built 4-6/1963, Phase Ie UP 705B and 726B “B” unit high short hood with ratchet brake and chain guard Wire inertial air intake grills UP “Dependable Transportation” Scheme Fully-assembled Multiple road numbers Directional LED headlights GP30B B-unit “cab” No number boards No pilot plows or plates 4-hose multiple unit (MU) hose clusters with silver gladhands Body mounted knuckle couplers; Micro-Trains® compatible Coupler box accepts Micro-Trains 1015/1016 couplers without modification Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle “Short” stepwells Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD “dot” style pattern Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on high short hood No cab vents No mirrors No sunshades or sunshade tracks No Horn No Antenna Accurate hood door and long hood detail Early 2-panel inertial compartment Tall turbo exhaust stack Extended-range dynamic brakes with 48” fan on riser ring Late dynamic brake intake grills with horizontal wires through vertical vanes 7-horizontal rib radiator intake grills See-through front and rear 48” radiator fan housings with 8-blade fans; 36” pan-top center radiator fan Curved radiator fan grab iron Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rail with separate plumbing Detailed Blomberg-B trucks with Hyatt bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Dimensionally accurate truck centers No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, windshield wipers, trainline hoses with silver gladhands, air tanks and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible even under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 3/4” Recommended radius: 11” DCC & sound equipped locomotives also feature: ESU LokSound 5 DCC & Sound decoder with “Full Throttle” One (1) cube-type speakers Prime mover sound 16-cylinder 567D3 prime mover sound Operates on both DC and DCC layouts

• Ready for use with DCC (DCC interface)

Era: Early - Late 2000s UP series mixed, built 3-4/80 ex-SP Series 8230-8299 Road number 2944, Ex UP 4551, Ex SP 8286 Operating LED-illuminated front deck-mounted ditch lights* Plated over front and blanked rear red Pyle-National 17540 “UDE” Gyralites Road number 4555, Ex SP 8291 Operating LED-illuminated front deck-mounted ditch lights* Removed and blanked front and rear red Pyle-National 17540 “UDE” Gyralites Blanked class lights with gaskets on front and bolted plates on rear Printed and LED-illuminated number boards* Vapor Corp. cab roof HVAC Front late SP/UP-style pilot plow with MU hose doors and grab irons Front and rear 3-hose MU hose clusters with silver gladhands Body mounted knuckle couplers; Micro-Trains® compatible Coupler box accepts Micro-Trains 1015/1016 couplers without modification Front pilot anticlimber Scale sectioned treadplate detail on the walkways Front "tall" stepwells and rear “ladder” steps 88” low short hood with wheel handbrake Bolted battery box doors with wide louvers Late cab sub-base doors with lift-off hinges SP nose headlight package Dash-2 cab with welded side window panels, SP/SSW blue flag bracket, and modified “L” front window Cab front door with additional door lock at top of door Tall clear wind wings with angled top corners mounted fore and aft of cab side window on both sides of cab Rear cab side vent on left side Standard EMD sunshades and long sunshade tracks Lost-wax brass Leslie RS-3L-R three-chime horn on clearance bracket, relocated to long hood roof “Whip” radio antenna mounted on ground plane over dust bin Late electrical cabinet "zig-zag" seam, closer to rear of cab Welded ECAFB (late) Late inertial air intake grilles with top and bottom drip rail “Post 1980” exhaust stack with silencer Accurately-profiled "post-1980" extended-range (bulged) dynamic brake housing Front straight uncoupling levers with loop handles and two inner and two outer mounting brackets Straight rear uncoupling lever with four mounting brackets Handrail set with anticlimber front and rear end railing with outward facing mounting brackets, “breakaway” inner stanchions and chain Notched pilot faces with high mounted angled lifting slots Pilot-face mounted MU receptacle Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Accurate hood door and long hood detail See-through standard 48” dynamic brake fan housings with fan blades visible inside See-through radiator intake compartment Etched-metal radiator exhaust grills with radiator shutters visible underneath Underbody frame rail with separate plumbing and traction motor cables Detailed HT-C trucks with Hyatt bearing caps, late center axle snubbers, sanding lines and brackets (outboard only Speed recorder first axle, left side Four-hole SP jacking pads Spare knuckle holders on rear pilot face Sill-mounted EFCO Frame-mounted bell Double Graham-White (Prime) brand 975-075 (can style) Standard air tanks 4,400 gallon fuel tank with reinforced tank edges where sides meet the tank ends, dual fuel fillers, dual vertical gauges, round gauge on stand and vertical breather pipe Factory-applied wire grab irons, windshield wipers, trainline hoses with silver gladhands, and more Motor with 5-pole skew wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED headlights Printing and lettering legible even under magnification Operates on Code 55 and 80 rail Packaging safely stores model Minimum radius: 9 3/4” Recommended radius: 11” DCC & sound equipped locomotives also feature ESU LokSound 5 DCC & Sound decoder with “Full Throttle” One (1) cube-type speaker EMD 16 Cylinder 645E3 prime mover Operates on both DC and DCC layouts

• with DCC Decoder

Black Trucks Road Number Specific Era: late 1960s to 1980s Fully assembled 24-C-GTE Class insulated body 24,000-gallon capacity Welded seams Intricate electrical and water plumbing Factory-applied air tank, brake cylinder, and control valve Brake beam Handbrake housing with finely detailed wheel and chain Factory-applied multiple unit (MU) hoses, coupler cut levers, and trainline hoses Durable body-mounted die-cast metal semi-scale Type E knuckle couplers Commonwealth 3-axle trucks with rotating bearing caps 36” machined metal wheels Accurately profiled .110" wide wheel tread Directional front and rear LED lighting 2-function DCC programmable decoder Operate using DC and DCC Operates on Code 70, 83 and 100 rail Printing and lettering legible even under magnification Weighted above Industry standards Packaging safely stores model Color matched to existing Tru-Color Paint colors whenever possible Minimum radius: 18” Truck safety chains available separately (SXT80111) – requires 22” minimum radius curve

• with DCC Decoder

Silver Trucks Road Number Specific Era: late 1960s to 1980s Fully assembled 24-C-GTE Class insulated body 24,000-gallon capacity Welded seams Intricate electrical and water plumbing Factory-applied air tank, brake cylinder, and control valve Brake beam Handbrake housing with finely detailed wheel and chain Factory-applied multiple unit (MU) hoses, coupler cut levers, and trainline hoses Durable body-mounted die-cast metal semi-scale Type E knuckle couplers Commonwealth 3-axle trucks with rotating bearing caps 36” machined metal wheels Accurately profiled .110" wide wheel tread Directional front and rear LED lighting 2-function DCC programmable decoder Operate using DC and DCC Operates on Code 70, 83 and 100 rail Printing and lettering legible even under magnification Weighted above Industry standards Packaging safely stores model Color matched to existing Tru-Color Paint colors whenever possible Minimum radius: 18” Truck safety chains available separately (SXT80111) – requires 22” minimum radius curve

• with DCC Decoder

Metallradsätze, sehr detailliert mit vielen separat angebrachten Details Road Number Specific All-new model Fully assembled 24-C-GTE Class insulated body 24,000-gallon capacity Welded seams Intricate electrical and water plumbing Factory-applied air tank, brake cylinder, and control valve Brake beam Handbrake housing with finely detailed wheel and chain Factory-applied multiple unit (MU) hoses, coupler cut levers, and trainline hoses Durable body-mounted die-cast metal semi-scale Type E knuckle couplers Commonwealth 3-axle trucks with SKF bearings 36” machined metal wheels Accurately profiled .110" wide wheel tread Directional front and rear LED lighting 2-function DCC programmable decoder Operate using DC and DCC Operates on Code 70, 83 and 100 rail Truck safety chains available separately (SXT80111) – requires 22” minimum radius curve Printing and lettering legible even under magnification Color matched to Tru-Color paint Weighted above Industry standards Packaging safely stores model Minimum radius: 18”

16 - 22 V Gleich- und Wechselstrom, 70mA, Steckdampfgenerator für vorbereitete Lokomotiven der Firmen Märklin, Trix, Brawa.

- geeignet für RSD15, RSD17; C628, C630, C636, C630M, C855

Tsunami TSU-BW1000 DCC Sound Decoder, einfacher Einbau, Motordecoder, Lichtsteuerung und Digitalsound auf einer Platine

- geeignet für AS-16, AS-416, AS-616, DR-4-4-1500, DR-6-4-1500, RF-16, DRS-6-4-1500, DRS-4-4--1500, DRS-6-6-1500

Tsunami TSU-BW1000 DCC Sound Decoder, einfacher Einbau, Motordecoder, Lichtsteuerung und Digitalsound auf einer Platine

Bausatz mit allen erforderlichen Teilen, bedruckt und lackiert, Grau Länge je Wagen ca.150 mm.

- 3er Pack

3er Set, Bausatz mit allen erforderlichen Teilen, Radsätze aus Metall, Kadee Kupplungen Länge je Wagen ca.150 mm.

- 3er Packung

Bausatz

Augen bewegen sich

Augen bewegen sich

Augen bewegen sich

Augen bewegen sich